Fractional Catalytic Pyrolysis of Hybrid Poplar Wood
The DOI matches its Crossref record.
Abstract
Fractional catalytic pyrolysis is a selective in situ conversion of biopolymers into desired products. Fractional catalytic pyrolysis was used to convert the lignin fraction of hybrid poplar wood into high yields of cresols and phenols while the carbohydrate fraction was selectively converted into gaseous products. Ground air-dried biomass was fractionally pyrolyzed at 450−500 °C in a 2-in fluidized bed reactor. The total liquid, gas, and char/coke yields were 33%, 53%, and 12.5%, respectively. The low viscosity liquid products consisted of almost pure phenolics with minor carbohydrate decomposition products. The major liquid components were phenol, cresols, methyl substituted phenols, and small fractions of indene and substituted naphthalenes. The carbon and oxygen contents and high heating value (HHV) of the oil were 71%, 21%, and 30.5 MJ/kg, respectively. About 90 wt % of the gaseous products was carbon monoxide and carbon dioxide, and the rest was a mixture of hydrocarbons.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Carpenter, D., Westover, T. L., Czernik, S., & Jablonski, W. (2014) · Green Chem. · doi:10.1039/c3gc41631c · Cited by 686
Top ten fundamental challenges of biomass pyrolysis for biofuels
Mettler, M. S., Vlachos, D. G., & Dauenhauer, P. J. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21679e · Cited by 576
Zhang, H., Cheng, Y.-T., Vispute, T. P., Xiao, R., & Huber, G. W. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01230d · Cited by 513
A review on biomass gasification syngas cleanup
Abdoulmoumine, N., Adhikari, S., Kulkarni, A., & Chattanathan, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.095 · Cited by 476
Self-citationSharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
Li, C., Zheng, M., Wang, A., & Zhang, T. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02684d · Cited by 410
Producing jet fuel from biomass lignin: Potential pathways to alkyl-benzenes and cycloalkanes
Cheng, F., & Brewer, C. E. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.030 · Cited by 268
Pyrolysis of lignin for phenols with alkaline additive
Peng, C., Zhang, G., Yue, J., & Xu, G. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.02.025 · Cited by 168
Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run
Paasikallio, V., Lindfors, C., Kuoppala, E., Solantausta, Y., Oasmaa, A., Lehto, J., & Lehtonen, J. (2014) · Green Chemistry · doi:10.1039/c4gc00571f · Cited by 154
Lignin Depolymerization to BTXs
Serrano, L., Cecilia, J. A., García-Sancho, C., & García, A. (2019) · Topics in Current Chemistry · doi:10.1007/s41061-019-0251-6 · Cited by 36
Metadata
- Authors
- Agblevor, F. A., Beis, S., Mante, O., & Abdoulmoumine, N.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-03-17
- Volume
- 49
- Issue
- 8
- Pages
- 3533-3538
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2029796849
- Cited by
- 144
- References
- 0
- FWCI
- 8.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.