CO2 Carrying Behavior of Calcium Aluminate Pellets under High-Temperature/High-CO2 Concentration Calcination Conditions
The DOI matches its Crossref record.
Abstract
Sintering and a resulting loss of activity during calcination/carbonation can introduce substantial economic penalties for a CO 2 looping cycle using CaO-based sorbents. In a real system, sorbent regeneration must be done at a high temperature to produce an almost pure CO 2 stream, and this will increase both sintering and loss of sorbent activity. The influence of severe calcination conditions on the CO 2 carrying behavior of calcium aluminate pellets is investigated here. Up to 30 calcination/carbonation cycles were performed using a thermogravimetric analyzer apparatus. The maximum temperature during the calcination stage in pure CO 2 was 950 °C, using different heating/cooling rates between two carbonation stages (700 °C, 20% CO 2 ). For comparison, cycles were also done using N 2 during the calcination stages. In addition, the original Cadomin limestone, used for pelletization, was also examined in its original form and the results obtained were compared with those for the aluminate pellets. As expected, high temperature during calcination strongly reduced CO 2 carrying capacities of both sorbents. However, aluminate pellets showed better resistance to these severe conditions. The conversion profiles obtained are significantly different to those obtained under milder conditions, with significant increased activity during the slower, diffusion-controlled, carbonation stage. Moreover, scanning electron microscopy analysis of samples after prolonged carbonation showed that pore filling occurred at the sorbent particle surfaces preventing diffusion of CO 2 toward the particle interior.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Self-citationCarbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Self-citationRecent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Recent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Dean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.10.013 · Cited by 375
Metadata
- Authors
- Manovic, V., & Anthony, E. J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-26
- Volume
- 49
- Issue
- 15
- Pages
- 6916-6922
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2054238633
- Cited by
- 84
- References
- 0
- FWCI
- 6.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CO2 Carrying Behavior of Calcium Aluminate Pellets under High-Temperature/High-CO2 Concentration Calcination Conditions. https://app.cochat.ai/papers/10.1021/ie901795e
- The paper
- Manovic, V., & Anthony, E. J. (2010). CO2 Carrying Behavior of Calcium Aluminate Pellets under High-Temperature/High-CO2 Concentration Calcination Conditions. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie901795e
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.