Effect of Metals on Supercritical Water Gasification of Cellulose and Lignin
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
We gasified cellulose and lignin in supercritical water, using quartz reactors, and quantified the catalytic effect of metals by adding them to these reactors in different forms. We used nickel, iron, copper, zinc, and zirconium wires, ruthenium powder, and Raney nickel slurry. The presence of metals was more likely to increase gas yields to a measurable extent when the catalyst surface area/biomass weight ratio was at least 15 mm 2 /mg (5.0 wt % biomass loading in our experiments). Nickel and copper typically provided higher gas yields at 5.0 wt % loading, and nickel provided the highest H 2 yields at 1.0 wt % loading. SCWG at 500 °C with nickel at 240 mm 2 /mg generated 16 mmol/g of H 2 from cellulose. CH 4 yields were not strongly influenced by the presence of metals. With nickel wires in the reactor, gas with about 40−50% of the energy content in the original biomass was produced from cellulose and lignin. All of the metals tested except copper produced H 2 from water when exposed to SCWG conditions with no biomass. It is important that this background H 2 formation be accounted for when interpreting results from SCWG experiments in the presence of metals. Exposure of nickel wires to supercritical water did not reduce their activity for H 2 production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Roles of Water for Chemical Reactions in High-Temperature Water
Akiya, N., & Savage, P. E. (2002) · Chemical Reviews · doi:10.1021/cr000668w · Cited by 1,581
Self-citationBiomass Gasification in Supercritical Water
Antal, M. J., Allen, S. G., Schulman, D., Xu, X., & Divilio, R. J. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0003436 · Cited by 610
Catalytic hydrothermal gasification of biomass
Elliott, D. C. (2008) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.74 · Cited by 384
Cited by
Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels
Zhou, C.-H., Xia, X., Lin, C.-X., Tong, D.-S., & Beltramini, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15124j · Cited by 1,420
Hydrothermal conversion of lignin: A review
Kang, S., Li, X., Fan, J., & Chang, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.013 · Cited by 552
A review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534
Supercritical water gasification of biomass for hydrogen production
Reddy, S. N., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.125 · Cited by 531
Okolie, J. A., Rana, R., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2019) · Sustainable Energy & Fuels · doi:10.1039/c8se00565f · Cited by 321
Metadata
- Authors
- Resende, F. L. P., & Savage, P. E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-02-12
- Volume
- 49
- Issue
- 6
- Pages
- 2694-2700
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2008918617
- Cited by
- 115
- References
- 4
- FWCI
- 3.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.