Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 279

The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.

Prediction of Binary and Ternary Diagrams Using the Statistical Associating Fluid Theory (SAFT) Equation of State

Blas, Felipe J., Vega, Lourdes F.·1998·Industrial & Engineering Chemistry Research
DOI 10.1021/ie970449+
Open this paper in CoChat — free account

Abstract

A modified statistical associating fluid theory (SAFT) equation of state has been applied to predict the phase equilibria behavior of binary and ternary mixtures. In order to study multicomponent systems, the equation is first applied to pure fluids. The SAFT equation is written in the same spirit as that presented by Huang and Radosz [ Ind. Eng. Chem. Res . 1990, 29, 2284−2294], but with two important differences: the reference term is a Lennard−Jones fluid, accounting explicitly for dispersive and repulsive forces, and the equation is extended to heteronuclear chains. The molecular parameters of pure substances are obtained by fitting to the saturated liquid density and by equating the chemical potentials in both phases. Three molecular parameters are needed to obtain the thermodynamic properties of pure substances, namely, the segment size, dispersive energy, and chain length. Two additional parameters are needed to describe the associating molecules, the association energy, and volume. They are obtained by fitting to experimental saturated liquid density and by equating the chemical potentials in both phases over a wide range of temperatures. The molecular parameters are found to scale with the molecular weight for the alkanes. The binary parameters of the mixtures, ξ 12 and η 12 in the generalized Lorentz−Berthelot combining rules, are fitted to experimental data for the molar fractions on the liquid and vapor sides at a given temperature, in such a way that they do not depend on the composition and/or temperature. These binary parameters are used to predict the behavior of the mixture at different thermodynamic conditions. Ternary mixtures are predicted from the previous parameters without any further adjustment. The agreement between prediction and experimental results is excellent in all cases.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ie970449+

Cites

17 of 17 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 279

Metadata

Authors
Blas, F. J., & Vega, L. F.
Venue
Industrial & Engineering Chemistry Research
Publisher
American Chemical Society (ACS)
Published
1998-01-15
Volume
37
Issue
2
Pages
660-674
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
DOI
10.1021/ie970449+
OpenAlex
W1964899949
Cited by
279
References
17
FWCI
12.30
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.