The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Dissolution and Hydrolysis of Cellulose in Subcritical and Supercritical Water
Abstract
Decomposition experiments of microcrystalline cellulose were conducted in subcritical and supercritical water (25 MPa, 320−400 °C, and 0.05−10.0 s). At 400 °C hydrolysis products were mainly obtained, while in 320−350 °C water, aqueous decomposition products of glucose were the main products. Kinetic studies of cellulose, cellobiose, and glucose at these conditions showed that below 350 °C the cellulose decomposition rate was slower than the glucose and cellobiose decomposition rates, while above 350 °C, the cellulose hydrolysis rate drastically increased and became higher than the glucose and cellobiose decomposition rates. Direct observation of the cellulose reaction in high-temperature water at high-pressure conditions by using a diamond anvil cell (DAC) showed that, below 280 °C, cellulose particles became gradually smaller with increasing reaction time but, at high temperatures (300−320 °C), cellulose particles disappeared with increasing transparency and much more rapidly than expected from the lower temperature results. These results suggest that cellulose hydrolysis at high temperature takes place with dissolution in water. This is probably because of the cleavage of intra- and intermolecular hydrogen linkages in the cellulose crystal. Thus, a homogeneous atmosphere is formed in supercritical water, and this results in the drastic increase of the cellulose decomposition rate above 350 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kabyemela, B. M., Adschiri, T., Malaluan, R. M., & Arai, K. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9806390 · Cited by 592
Self-citation
Cited by
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
van Putten, R.-J., van der Waal, J. C., de Jong, E., Rasrendra, C. B., Heeres, H. J., & de Vries, J. G. (2013) · Chemical Reviews · doi:10.1021/cr300182k · Cited by 2,886
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Roles of Water for Chemical Reactions in High-Temperature Water
Akiya, N., & Savage, P. E. (2002) · Chemical Reviews · doi:10.1021/cr000668w · Cited by 1,581
Metadata
- Authors
- Sasaki, M., Fang, Z., Fukushima, Y., Adschiri, T., & Arai, K.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-08-01
- Volume
- 39
- Issue
- 8
- Pages
- 2883-2890
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1974277784
- Cited by
- 691
- References
- 1
- FWCI
- 9.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.