Demulsification of Crude Oil Emulsions: Correlation to Microemulsion Phase Behavior
The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
The search for the appropriate demulsifier for a water-in-crude oil emulsion is generally carried out through the well-known “bottle test” technique. A comprehensive approach is proposed here, which is based on earlier work on the rate of separation of surfactant−water−hydrocarbon mixtures, where it was found that “optimal” type III systems, in Winsor's nomenclature, exhibits the fastest separation rate. It is shown that the rules developed for microemulsion optimization apply to the selection of the demulsifier. They allow one to take into account the variation of salinity, temperature, crude-oil type, and so forth and provide an explanation for the demulsifier concentration effect. Interfacial tension measurements have been carried out. They show that the kinetics of demulsifier adsorption at the water−crude oil interface (or alternatively the Gibbs elasticity modulus) is correlated to the phase separation rate, as already described in the literature: the higher the kinetics, the faster the separation rate.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The bottle test is the traditional method used to assess oil emulsion stability [2,12,13,15].”
From A new method to select demulsifiers and optimize dosage at wet crude oil separation facilities (2021) · cites this paper as [15]
Citations
Cites
Solvent properties of amphiphilic compounds
Winsor, P. A. (1954) · Butterworths Scientific Publications eBooks · Cited by 758
Macroemulsion Stability: The Oriented Wedge Theory Revisited
Kabalnov, A., & Wennerström, H. (1996) · Langmuir · doi:10.1021/la950359e · Cited by 355
A correlation for phase behavior of nonionic surfactants
Bourrel, M., Salager, J. L., Schechter, R. S., & Wade, W. H. (1980) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(80)90470-1 · Cited by 267
Self-citationStability of emulsions under equilibrium and dynamic conditions
Ivanov, I. B., & Kralchevsky, P. A. (1997) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(96)03903-9 · Cited by 227
Chemical demulsification of petroleum emulsions using oil-soluble demulsifiers
Krawczyk, M. A., Wasan, D. T., & Shetty, C. (1991) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00050a014 · Cited by 168
Effect of Demulsifier Partitioning on the Destabilization of Water-in-Oil Emulsions
Kim, Y. H., & Wasan, D. T. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950372u · Cited by 165
Flocculation and coalescence of micron-size emulsion droplets
Ivanov, I. B., Danov, K. D., & Kralchevsky, P. A. (1999) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00620-7 · Cited by 163
Graciaa, A., Lachaise, J., Sayous, J. G., Grenier, P., Yiv, S. H., Schechter, R., & WADE, W. H. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90431-9 · Cited by 160
Agents Which Promote and Stabilize Water-in-Oil Emulsions
Lee, R. F. (1999) · Spill Science & Technology Bulletin · doi:10.1016/s1353-2561(98)00028-0 · Cited by 142
The relation of emulsion stability to phase behavior and interfacial tension of surfactant systems
Bourrel, M., Graciaa, A., Schechter, R., & WADE, W. H. (1979) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(79)90198-x · Cited by 138
Self-citation
Research works printed but not linked: 5
- Bourrel M., 1988, Microemulsions and Related Systems
- Salager J. L, 1990, Int. Chem. Eng., 30, 103
- Kabalnov A., 1996, Langmuir, 12, 8
- Mukherjee S., 1988, Prepr.Am. Chem. Soc., Div. Pet. Chem., 33, 205
- Breen P. J., 1995, ACS Symp. Ser.
Cited by
Demulsification techniques of water-in-oil and oil-in-water emulsions in petroleum industry
Zolfaghari, R., Fakhru’l-Razi, A., Abdullah, L. C., Elnashaie, S. S. E. H., & Pendashteh, A. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.06.026 · Cited by 733
Production Chemicals for the Oil and Gas Industry
Kelland, M. A. (2016) · CRC Press eBooks · doi:10.1201/9781420092974 · Cited by 454
Overview on petroleum emulsions, formation, influence and demulsification treatment techniques
Abdulredha, M. M., Siti Aslina, H., & Luqman, C. A. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2018.11.014 · Cited by 302
The Formation, Stabilization and Separation of Oil–Water Emulsions: A Review
Tian, Y., Zhou, J., He, C., He, L., Li, X., & Sui, H. (2022) · Processes · doi:10.3390/pr10040738 · Cited by 241
Interfacial behavior of asphaltenes
Langevin, D., & Argillier, J.-F. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.10.005 · Cited by 259
Metadata
- Authors
- Goldszal, A., & Bourrel, M.
- Affiliations
- GRL−ELF ATOCHEM, ELF AQUITAINE, B.P. 34, 64170 LACQ, France
- ORCID
- Bourrel, Maurice
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-06-28
- Volume
- 39
- Issue
- 8
- Pages
- 2746-2751
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2010788516
- Cited by
- 132
- References
- 22
- Citations by year
- 2026: 3 · 2025: 4 · 2024: 6 · 2023: 5 · 2022: 7 · 2021: 13 · 2020: 4 · 2019: 8 · 2018: 5 · 2017: 3 · 2016: 11 · 2015: 9 · 2014: 7 · 2013: 7 · 2012: 8
- FWCI
- 1.17
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Topics
- Physical Sciences › Chemistry › Analytical Chemistry › Petroleum Processing and Analysis
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
- Physical Sciences › Energy › Fuel Technology › Enhanced Oil Recovery Techniques
- Keywords
- demulsification, water-in-oil emulsions, crude oil emulsions, demulsifier selection, microemulsion phase behavior, interfacial tension, salinity effects, temperature effects, crude oil types
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.