The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
All-Polymer Solar Cells with 3.3% Efficiency Based on Naphthalene Diimide-Selenophene Copolymer Acceptor
Abstract
The lack of suitable acceptor (n-type) polymers has limited the photocurrent and efficiency of polymer/polymer bulk heterojunction (BHJ) solar cells. Here, we report an evaluation of three naphthalene diimide (NDI) copolymers as electron acceptors in BHJ solar cells which finds that all-polymer solar cells based on an NDI-selenophene copolymer (PNDIS-HD) acceptor and a thiazolothiazole copolymer (PSEHTT) donor exhibit a record 3.3% power conversion efficiency. The observed short circuit current density of 7.78 mA/cm(2) and external quantum efficiency of 47% are also the best such photovoltaic parameters seen in all-polymer solar cells so far. This efficiency is comparable to the performance of similarly evaluated [6,6]-Phenyl-C61-butyric acid methyl ester (PC60BM)/PSEHTT devices. The lamellar crystalline morphology of PNDIS-HD, leading to balanced electron and hole transport in the polymer/polymer blend solar cells accounts for its good photovoltaic properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
He, Z., Zhong, C., Su, S., Xu, M., Wu, H., & Cao, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.190 · Cited by 3,764
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Small Molecule Organic Semiconductors on the Move: Promises for Future Solar Energy Technology
Mishra, A., & Bäuerle, P. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201102326 · Cited by 1,816
n‐Type Organic Semiconductors in Organic Electronics
Anthony, J. E., Facchetti, A., Heeney, M., Marder, S. R., & Zhan, X. (2010) · Advanced Materials · doi:10.1002/adma.200903628 · Cited by 1,181
Zhan, X., Tan, Z., Domercq, B., An, Z., Zhang, X., Barlow, S., Li, Y., Zhu, D., Kippelen, B., & Marder, S. R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja071760d · Cited by 1,172
Cited by
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Non-fullerene acceptors for organic solar cells
Yan, C., Barlow, S., Wang, Z., Yan, H., Jen, A. K.-Y., Marder, S. R., & Zhan, X. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.3 · Cited by 2,710
Recent Advances in Bulk Heterojunction Polymer Solar Cells
Lu, L., Zheng, T., Wu, Q., Schneider, A. M., Zhao, D., & Yu, L. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00098 · Cited by 2,550
Next-generation organic photovoltaics based on non-fullerene acceptors
Cheng, P., Li, G., Zhan, X., & Yang, Y. (2018) · Nature Photonics · doi:10.1038/s41566-018-0104-9 · Cited by 1,905
Imide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Wadsworth, A., Moser, M., Marks, A., Little, M. S., Gasparini, N., Brabec, C. J., Baran, D., & McCulloch, I. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00892a · Cited by 986
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Dai, S., Zhao, F., Zhang, Q., Lau, T.-K., Li, T., Liu, K., Ling, Q., Wang, C., Lu, X., You, W., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12755 · Cited by 864
Flexible, highly efficient all-polymer solar cells
Kim, T., Kim, J.-H., Kang, T. E., Lee, C., Kang, H., Shin, M., Wang, C., Ma, B., Jeong, U., Kim, T.-S., et al. (2015) · Nature Communications · doi:10.1038/ncomms9547 · Cited by 861
Non-fullerene acceptors for organic photovoltaics: an emerging horizon
Lin, Y., & Zhan, X. (2014) · Materials Horizons · doi:10.1039/c4mh00042k · Cited by 745
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Organic Photovoltaics over Three Decades
Inganäs, O. (2018) · Advanced Materials · doi:10.1002/adma.201800388 · Cited by 708
Meng, D., Sun, D., Zhong, C., Liu, T., Fan, B., Huo, L., Li, Y., Jiang, W., Choi, H., Kim, T., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11149 · Cited by 706
Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency
Zhao, F., Dai, S., Wu, Y., Zhang, Q., Wang, J., Jiang, L., Ling, Q., Wei, Z., Ma, W., You, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700144 · Cited by 699
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Jung, J. W., Jo, J. W., Chueh, C., Liu, F., Jo, W. H., Russell, T. P., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201501214 · Cited by 444
7.7% Efficient All‐Polymer Solar Cells
Hwang, Y., Courtright, B. A. E., Ferreira, A. S., Tolbert, S. H., & Jenekhe, S. A. (2015) · Advanced Materials · doi:10.1002/adma.201501604 · Cited by 432
Self-citationZang, Y., Li, C., Chueh, C., Williams, S. T., Jiang, W., Wang, Z., Yu, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201401992 · Cited by 422
Wang, W., Yan, C., Lau, T., Wang, J., Liu, K., Fan, Y., Lu, X., & Zhan, X. (2017) · Advanced Materials · doi:10.1002/adma.201701308 · Cited by 421
A Star‐Shaped Perylene Diimide Electron Acceptor for High‐Performance Organic Solar Cells
Lin, Y., Wang, Y., Wang, J., Hou, J., Li, Y., Zhu, D., & Zhan, X. (2014) · Advanced Materials · doi:10.1002/adma.201400525 · Cited by 414
Kang, H., Uddin, M. A., Lee, C., Kim, K.-H., Nguyen, T. L., Lee, W., Li, Y., Wang, C., Woo, H. Y., & Kim, B. J. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5123182 · Cited by 381
Liu, Y., Mu, C., Jiang, K., Zhao, J., Li, Y., Zhang, L., Li, Z., Lai, J. Y. L., Hu, H., Ma, T., et al. (2015) · Advanced Materials · doi:10.1002/adma.201404152 · Cited by 379
High Performance All‐Polymer Solar Cell via Polymer Side‐Chain Engineering
Zhou, Y., Kurosawa, T., Ma, W., Guo, Y., Fang, L., Vandewal, K., Diao, Y., Wang, C., Yan, Q., Reinspach, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201306242 · Cited by 338
Long, X., Ding, Z., Dou, C., Zhang, J., Liu, J., & Wang, L. (2016) · Advanced Materials · doi:10.1002/adma.201601205 · Cited by 331
Wang, W., Wu, Q., Sun, R., Guo, J., Wu, Y., Shi, M., Yang, W., Li, H., & Min, J. (2020) · Joule · doi:10.1016/j.joule.2020.03.019 · Cited by 326
Yao, J., Yu, C., Liu, Z., Luo, H., Yang, Y., Zhang, G., & Zhang, D. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09737 · Cited by 316
Lee, C., Kang, H., Lee, W., Kim, T., Kim, K., Woo, H. Y., Wang, C., & Kim, B. J. (2015) · Advanced Materials · doi:10.1002/adma.201405226 · Cited by 296
Mori, D., Benten, H., Okada, I., Ohkita, H., & Ito, S. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01326c · Cited by 272
Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells
Genene, Z., Mammo, W., Wang, E., & Andersson, M. R. (2019) · Advanced Materials · doi:10.1002/adma.201807275 · Cited by 256
Improved Thermal Stability of Polymer Solar Cells by Incorporating Porphyrins
Wang, S., Qu, Y., Li, S., Ye, F., Chen, Z., & Yang, X. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201403018 · Cited by 48
Liu, S.-Y., Jung, J. W., Li, C.-Z., Huang, J., Zhang, J., Chen, H., & Jen, A. K.-Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06639e · Cited by 38
Metadata
- Authors
- Earmme, T., Hwang, Y.-J., Murari, N. M., Subramaniyan, S., & Jenekhe, S. A.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-10-01
- Volume
- 135
- Issue
- 40
- Pages
- 14960-14963
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2325901074
- Cited by
- 367
- References
- 23
- FWCI
- 37.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.