The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Fluorinated Benzothiadiazole-Based Conjugated Polymers for High-Performance Polymer Solar Cells without Any Processing Additives or Post-treatments
Abstract
Thanks to their many favorable advantages, polymer solar cells exhibit great potential for next-generation clean energy sources. Herein, we have successfully designed and synthesized a series of new fluorinated benzothiadiazole-based conjugated copolymers PBDT(TEH)-DT(H)BTff (P1), PBDT(TEH)-DT(EH)BTff (P2), and PBDT(HDO)-DT(H)BTff (P3). The power conversion efficiencies of 4.46, 6.20, and 8.30% were achieved for P1-, P2-, and P3-based devices within ~100 nm thickness active layers under AM 1.5G illumination without any processing additives or post-treatments, respectively. The PCE of 8.30% for P3 is the highest value for the reported traditional single-junction polymer solar cells via a simple fabrication architecture without any additives or post-treatments. In addition, it is noteworthy that P3 also allows making high efficient polymer solar cells with high PCEs of 7.27 and 6.56% under the same condition for ~200 and ~300 nm thickness active layers, respectively. Excellent photoelectric properties and good solubility make polymer P3 become an alternative material for high-performance polymer solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
He, Z., Zhong, C., Su, S., Xu, M., Wu, H., & Cao, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.190 · Cited by 3,764
Polymer‐Fullerene Bulk‐Heterojunction Solar Cells
Dennler, G., Scharber, M. C., & Brabec, C. J. (2009) · Advanced Materials · doi:10.1002/adma.200801283 · Cited by 3,114
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Li, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
Device Physics of Polymer:Fullerene Bulk Heterojunction Solar Cells
Blom, P. W. M., Mihailetchi, V. D., Koster, L. J. A., & Markov, D. E. (2007) · Advanced Materials · doi:10.1002/adma.200601093 · Cited by 2,299
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Price, S. C., Stuart, A. C., Yang, L., Zhou, H., & You, W. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1112595 · Cited by 1,505
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Zhou, H., Yang, L., & You, W. (2012) · Macromolecules · doi:10.1021/ma201648t · Cited by 1,501
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Toward a Rational Design of Poly(2,7-Carbazole) Derivatives for Solar Cells
Blouin, N., Michaud, A., Gendron, D., Wakim, S., Blair, E., Neagu-Plesu, R., Belletête, M., Durocher, G., Tao, Y., & Leclerc, M. (2008) · Journal of the American Chemical Society · doi:10.1021/ja0771989 · Cited by 1,370
A Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells
Blouin, N., Michaud, A., & Leclerc, M. (2007) · Advanced Materials · doi:10.1002/adma.200602496 · Cited by 1,260
Zhou, H., Yang, L., Stuart, A. C., Price, S. C., Liu, S., & You, W. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005451 · Cited by 1,210
Theory of space-charge-limited current enhanced by Frenkel effect
Murgatroyd, P. N. (1970) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/3/2/308 · Cited by 1,036
Huo, L., Zhang, S., Guo, X., Xu, F., Li, Y., & Hou, J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103313 · Cited by 985
Fullerene derivative acceptors for high performance polymer solar cells
He, Y., & Li, Y. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp01178a · Cited by 941
High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells
Small, C. E., Chen, S., Subbiah, J., Amb, C. M., Tsang, S.-W., Lai, T.-H., Reynolds, J. R., & So, F. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.317 · Cited by 931
Piliego, C., Holcombe, T. W., Douglas, J. D., Woo, C. H., Beaujuge, P. M., & Fréchet, J. M. J. (2010) · Journal of the American Chemical Society · doi:10.1021/ja103275u · Cited by 907
Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells
Li, X., Choy, W. C. H., Huo, L., Xie, F., Sha, W. E. I., Ding, B., Guo, X., Li, Y., Hou, J., You, J., et al. (2012) · Advanced Materials · doi:10.1002/adma.201200120 · Cited by 699
Cabanetos, C., El Labban, A., Bartelt, J. A., Douglas, J. D., Mateker, W. R., Fréchet, J. M. J., McGehee, M. D., & Beaujuge, P. M. (2013) · Journal of the American Chemical Society · doi:10.1021/ja400365b · Cited by 679
Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte
Yang, T., Wang, M., Duan, C., Hu, X., Huang, L., Peng, J., Huang, F., & Gong, X. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22296e · Cited by 656
Lu, L., Luo, Z., Xu, T., & Yu, L. (2013) · Nano Letters · doi:10.1021/nl3034398 · Cited by 581
Stuart, A. C., Tumbleston, J. R., Zhou, H., Li, W., Liu, S., Ade, H., & You, W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja309289u · Cited by 561
A Selenium‐Substituted Low‐Bandgap Polymer with Versatile Photovoltaic Applications
Dou, L., Chang, W., Gao, J., Chen, C., You, J., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201203827 · Cited by 416
Albrecht, S., Janietz, S., Schindler, W., Frisch, J., Kurpiers, J., Kniepert, J., Inal, S., Pingel, P., Fostiropoulos, K., Koch, N., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305039j · Cited by 374
Chen, H.-C., Chen, Y.-H., Liu, C.-C., Chien, Y.-C., Chou, S.-W., & Chou, P.-T. (2012) · Chemistry of Materials · doi:10.1021/cm302861s · Cited by 337
Efficient Small Bandgap Polymer Solar Cells with High Fill Factors for 300 nm Thick Films
Li, W., Hendriks, K. H., Roelofs, W. S. C., Kim, Y., Wienk, M. M., & Janssen, R. A. J. (2013) · Advanced Materials · doi:10.1002/adma.201300017 · Cited by 319
Huang, Y., Guo, X., Liu, F., Huo, L., Chen, Y., Russell, T. P., Han, C. C., Li, Y., & Hou, J. (2012) · Advanced Materials · doi:10.1002/adma.201200995 · Cited by 310
Dou, L., Chen, C.-C., Yoshimura, K., Ohya, K., Chang, W.-H., Gao, J., Liu, Y., Richard, E., & Yang, Y. (2013) · Macromolecules · doi:10.1021/ma400452j · Cited by 310
Huo, L., & Hou, J. (2011) · Polymer Chemistry · doi:10.1039/c1py00197c · Cited by 289
Min, J., Zhang, Z.-G., Zhang, S., & Li, Y. (2012) · Chemistry of Materials · doi:10.1021/cm3017006 · Cited by 282
Guo, X., Zhou, N., Lou, S. J., Hennek, J. W., Ponce Ortiz, R., Butler, M. R., Boudreault, P.-L. T., Strzalka, J., Morin, P.-O., Leclerc, M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3081583 · Cited by 265
Increased open circuit voltage in fluorinated benzothiadiazole-based alternating conjugated polymers
Zhang, Y., Chien, S.-C., Chen, K.-S., Yip, H.-L., Sun, Y., Davies, J. A., Chen, F.-C., & Jen, A. K.-Y. (2011) · Chemical Communications · doi:10.1039/c1cc14586j · Cited by 251
Brédas, J. L., & Heeger, A. J. (1994) · Chemical Physics Letters · doi:10.1016/0009-2614(93)e1421-c · Cited by 236
Yang, L., Zhou, H., & You, W. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp106640r · Cited by 226
Dou, L., Chen, C.-C., Yoshimura, K., Ohya, K., Chang, W.-H., Gao, J., Liu, Y., Richard, E., & Yang, Y. (2013) · Macromolecules · doi:10.1021/ma400974a · Cited by 222
Zhang, Y., Zou, J., Cheuh, C.-C., Yip, H.-L., & Jen, A. K.-Y. (2012) · Macromolecules · doi:10.1021/ma3009178 · Cited by 198
High‐Efficiency Organic Solar Cells Based on End‐Functional‐Group‐Modified Poly(3‐hexylthiophene)
Kim, J. S., Lee, Y., Lee, J. H., Park, J. H., Kim, J. K., & Cho, K. (2010) · Advanced Materials · doi:10.1002/adma.200902803 · Cited by 174
Di Nuzzo, D., Aguirre, A., Shahid, M., Gevaerts, V. S., Meskers, S. C. J., & Janssen, R. A. J. (2010) · Advanced Materials · doi:10.1002/adma.201001452 · Cited by 169
Li, Z., Lu, J., Tse, S.-C., Zhou, J., Du, X., Tao, Y., & Ding, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04166a · Cited by 133
Parmer, J. E., Mayer, A. C., Hardin, B. E., Scully, S. R., McGehee, M. D., Heeney, M., & McCulloch, I. A. (2008) · Applied Physics Letters · doi:10.1063/1.2899996 · Cited by 116
Cited by
Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials
Yao, H., Ye, L., Zhang, H., Li, S., Zhang, S., & Hou, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00176 · Cited by 1,173
A molecular nematic liquid crystalline material for high-performance organic photovoltaics
Sun, K., Xiao, Z., Lu, S., Zajaczkowski, W., Pisula, W., Hanssen, E., White, J. M., Williamson, R. M., Subbiah, J., Ouyang, J., et al. (2015) · Nature Communications · doi:10.1038/ncomms7013 · Cited by 630
Small is Powerful: Recent Progress in Solution‐Processed Small Molecule Solar Cells
Collins, S. D., Ran, N. A., Heiber, M. C., & Nguyen, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602242 · Cited by 414
Organic Solar Cell Materials toward Commercialization
Xue, R., Zhang, J., Li, Y., & Li, Y. (2018) · Small · doi:10.1002/smll.201801793 · Cited by 304
Fluorescent Supramolecular Polymeric Materials
Wang, H., Ji, X., Li, Z., & Huang, F. (2017) · Advanced Materials · doi:10.1002/adma.201606117 · Cited by 302
Metadata
- Authors
- Wang, N., Chen, Z., Wei, W., & Jiang, Z.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-11-05
- Volume
- 135
- Issue
- 45
- Pages
- 17060-17068
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2024797096
- Cited by
- 328
- References
- 43
- FWCI
- 35.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.