The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
High Thermoelectric Performance of p-Type SnTe via a Synergistic Band Engineering and Nanostructuring Approach
Abstract
SnTe is a potentially attractive thermoelectric because it is the lead-free rock-salt analogue of PbTe. However, SnTe is a poor thermoelectric material because of its high hole concentration arising from inherent Sn vacancies in the lattice and its very high electrical and thermal conductivity. In this study, we demonstrate that SnTe-based materials can be controlled to become excellent thermoelectrics for power generation via the successful application of several key concepts that obviate the well-known disadvantages of SnTe. First, we show that Sn self-compensation can effectively reduce the Sn vacancies and decrease the hole carrier density. For example, a 3 mol % self-compensation of Sn results in a 50% improvement in the figure of merit ZT. In addition, we reveal that Cd, nominally isoelectronic with Sn, favorably impacts the electronic band structure by (a) diminishing the energy separation between the light-hole and heavy-hole valence bands in the material, leading to an enhanced Seebeck coefficient, and (b) enlarging the energy band gap. Thus, alloying with Cd atoms enables a form of valence band engineering that improves the high-temperature thermoelectric performance, where p-type samples of SnCd(0.03)Te exhibit ZT values of ~0.96 at 823 K, a 60% improvement over the Cd-free sample. Finally, we introduce endotaxial CdS or ZnS nanoscale precipitates that reduce the lattice thermal conductivity of SnCd(0.03)Te with no effect on the power factor. We report that SnCd(0.03)Te that are endotaxially nanostructured with CdS and ZnS have a maximum ZTs of ~1.3 and ~1.1 at 873 K, respectively. Therefore, SnTe-based materials could be ideal alternatives for p-type lead chalcogenides for high temperature thermoelectric power generation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Self-Consistent Equations Including Exchange and Correlation Effects
Kohn, W., & Sham, L. J. (1965) · Physical Review · doi:10.1103/physrev.140.a1133 · Cited by 64,135
Hohenberg, P., & Kohn, W. (1964) · Physical Review · doi:10.1103/physrev.136.b864 · Cited by 53,541
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Thin-film thermoelectric devices with high room-temperature figures of merit
Venkatasubramanian, R., Siivola, E., Colpitts, T., & O'Quinn, B. (2001) · Nature · doi:10.1038/35098012 · Cited by 5,205
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Self-citationConvergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Self-citationUltrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe
Zhao, L.-D., Tan, G., Hao, S., He, J., Pei, Y., Chi, H., Wang, H., Gong, S., Xu, H., Dravid, V. P., et al. (2016) · Science · doi:10.1126/science.aad3749 · Cited by 2,037
Self-citationCompromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
Thinking Like a Chemist: Intuition in Thermoelectric Materials
Zeier, W. G., Zevalkink, A., Gibbs, Z. M., Hautier, G., Kanatzidis, M. G., & Snyder, G. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201508381 · Cited by 882
Self-citationNon-equilibrium processing leads to record high thermoelectric figure of merit in PbTe–SrTe
Tan, G., Shi, F., Hao, S., Zhao, L.-D., Chi, H., Zhang, X., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2016) · Nature Communications · doi:10.1038/ncomms12167 · Cited by 665
Self-citationA critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
Mao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
SnSe: a remarkable new thermoelectric material
Zhao, L.-D., Chang, C., Tan, G., & Kanatzidis, M. G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01755j · Cited by 573
Self-citationGuo, R., Wang, X., Kuang, Y., & Huang, B. (2015) · Physical Review B · doi:10.1103/physrevb.92.115202 · Cited by 527
Tan, G., Shi, F., Hao, S., Chi, H., Zhao, L.-D., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00837 · Cited by 502
Self-citationMehdizadeh Dehkordi, A., Zebarjadi, M., He, J., & Tritt, T. M. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.08.001 · Cited by 493
Li, W., Zheng, L., Ge, B., Lin, S., Zhang, X., Chen, Z., Chang, Y., & Pei, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605887 · Cited by 432
Charge and phonon transport in PbTe-based thermoelectric materials
Xiao, Y., & Zhao, L.-D. (2018) · npj Quantum Materials · doi:10.1038/s41535-018-0127-y · Cited by 425
Self-citationEco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges
Moshwan, R., Yang, L., Zou, J., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703278 · Cited by 424
Extraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe
Tan, G., Shi, F., Doak, J. W., Sun, H., Zhao, L.-D., Wang, P., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01463d · Cited by 401
Self-citationRoutes for high-performance thermoelectric materials
Zhou, X., Yan, Y., Lu, X., Zhu, H., Han, X., Chen, G., & Ren, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.039 · Cited by 393
Wu, H., Chang, C., Feng, D., Xiao, Y., Zhang, X., Pei, Y., Zheng, L., Wu, D., Gong, S., Chen, Y., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02423d · Cited by 325
Self-citationStudies on Thermoelectric Properties of n‐type Polycrystalline SnSe1‐xSx by Iodine Doping
Zhang, Q., Chere, E. K., Sun, J., Cao, F., Dahal, K., Chen, S., Chen, G., & Ren, Z. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500360 · Cited by 321
Interstitial Point Defect Scattering Contributing to High Thermoelectric Performance in SnTe
Pei, Y., Zheng, L., Li, W., Lin, S., Chen, Z., Wang, Y., Xu, X., Yu, H., Chen, Y., & Ge, B. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600019 · Cited by 306
Xie, H., Hao, S., Bao, J., Slade, T. J., Snyder, G. J., Wolverton, C., & Kanatzidis, M. G. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c03427 · Cited by 298
Self-citationBanik, A., Vishal, B., Perumal, S., Datta, R., & Biswas, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00728g · Cited by 296
Su, X., Wei, P., Li, H., Liu, W., Yan, Y., Li, P., Su, C., Xie, C., Zhao, W., Zhai, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602013 · Cited by 296
Self-citationPolymer based thermoelectric nanocomposite materials and devices: Fabrication and characteristics
Nandihalli, N., Liu, C.-J., & Mori, T. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105186 · Cited by 293
Optimization of thermoelectric efficiency in SnTe: the case for the light band
Zhou, M., Gibbs, Z. M., Wang, H., Han, Y., Xin, C., Li, L., & Snyder, G. J. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02091j · Cited by 270
Hu, L., Zhang, Y., Wu, H., Li, J., Li, Y., Mckenna, M., He, J., Liu, F., Pennycook, S. J., & Zeng, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802116 · Cited by 266
High-efficient thermoelectric materials: The case of orthorhombic IV-VI compounds
Ding, G., Gao, G., & Yao, K. (2015) · Scientific Reports · doi:10.1038/srep09567 · Cited by 264
Metadata
- Authors
- Tan, G., Zhao, L.-D., Shi, F., Doak, J. W., Lo, S.-H., Sun, H., Wolverton, C., Dravid, V. P., Uher, C., & Kanatzidis, M. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-02
- Volume
- 136
- Issue
- 19
- Pages
- 7006-7017
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2074782086
- Cited by
- 706
- References
- 51
- FWCI
- 21.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.