The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
From Microporous Regular Frameworks to Mesoporous Materials with Ultrahigh Surface Area: Dynamic Reorganization of Porous Polymer Networks
Abstract
High surface area organic materials featuring both micro- and mesopores were synthesized under ionothermal conditions via the formation of polyaryltriazine networks. While the polytrimerization of nitriles in zinc chloride at 400 degrees C produces microporous polymers, higher reaction temperatures induce the formation of additional spherical mesopores with a narrow dispersity. The nitrogen-rich carbonaceous polymer materials thus obtained present surface areas and porosities up to 3300 m(2) g(-1) and 2.4 cm(3) g(-1), respectively. The key point of this synthesis relies on the occurrence of several high temperature polymerization reactions, where irreversible carbonization reactions coupled with the reversible trimerization of nitriles allow the reorganization of the dynamic triazine network. The ZnCl2 molten salt fulfills the requirement of a high temperature solvent, but is also required as catalyst. Thus, this dynamic polymerization system provides not only highly micro- and mesoporous materials, but also allows controlling the pore structure in amorphous organic materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porous, Crystalline, Covalent Organic Frameworks
Côté, A. P., Benin, A. I., Ockwig, N. W., O'Keeffe, M., Matzger, A. J., & Yaghi, O. M. (2005) · Science · doi:10.1126/science.1120411 · Cited by 8,357
Hart, M., & Deutsch, M. (1983) · Physics Bulletin · doi:10.1088/0031-9112/34/7/032 · Cited by 4,568
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Porous, Covalent Triazine‐Based Frameworks Prepared by Ionothermal Synthesis
Kuhn, P., Antonietti, M., & Thomas, A. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705710 · Cited by 2,634
Self-citationRowan, S. J., Cantrill, S. J., Cousins, G. R. L., Sanders, J. K. M., & Stoddart, J. F. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20020315)41:6<898::aid-anie898>3.0.co;2-e · Cited by 2,588
Synthesis of Highly Ordered Carbon Molecular Sieves via Template-Mediated Structural Transformation
Ryoo, R., Joo, S. H., & Jun, S. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp991673a · Cited by 2,450
Crystallized Frameworks with Giant Pores: Are There Limits to the Possible?
Férey, G., Mellot-Draznieks, C., Serre, C., & Millange, F. (2005) · Accounts of Chemical Research · doi:10.1021/ar040163i · Cited by 1,327
Walton, K. S., & Snurr, R. Q. (2007) · Journal of the American Chemical Society · doi:10.1021/ja071174k · Cited by 1,029
Dybtsev, D. N., Chun, H., Yoon, S. H., Kim, D., & Kim, K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja038678c · Cited by 954
Dincǎ, M., & Long, J. R. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0523082 · Cited by 736
Past, Present, and Future of Periodic Mesoporous OrganosilicasThe PMOs
Hatton, B., Landskron, K., Whitnall, W., Perovic, D., & Ozin, G. A. (2005) · Accounts of Chemical Research · doi:10.1021/ar040164a · Cited by 436
Hard Templates for Soft Materials: Creating Nanostructured Organic Materials
Thomas, A., Goettmann, F., & Antonietti, M. (2008) · Chemistry of Materials · doi:10.1021/cm702126j · Cited by 389
Self-citationA Mesh‐Adjustable Molecular Sieve for General Use in Gas Separation
Ma, S., Sun, D., Wang, X., & Zhou, H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604353 · Cited by 380
Inverted metal–organic frameworks: solid-state hosts with modular functionality
Papaefstathiou, G. S., & MacGillivray, L. R. (2003) · Coordination Chemistry Reviews · doi:10.1016/s0010-8545(03)00122-x · Cited by 294
The Next Generation of Shape‐Persistant Zeolite Analogues: Covalent Organic Frameworks
Mastalerz, M. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200703871 · Cited by 189
Selective Gas Sorption within a Dynamic Metal-Organic Framework
Chen, B., Ma, S., Hurtado, E. J., Lobkovsky, E. B., Liang, C., Zhu, H., & Dai, S. (2007) · Inorganic Chemistry · doi:10.1021/ic7013573 · Cited by 126
Carbons of high surface area. A study by adsorption and high resolution electron microscopy
Marsh, H., Crawford, D., O'Grady, T. M., & Wennerberg, A. (1982) · Carbon · doi:10.1016/0008-6223(82)90042-2 · Cited by 124
Cited by
Paraknowitsch, J. P., & Thomas, A. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41444b · Cited by 1,848
Self-citationDesign and Preparation of Porous Polymers
Wu, D., Xu, F., Sun, B., Fu, R., He, H., & Matyjaszewski, K. (2012) · Chemical Reviews · doi:10.1021/cr200440z · Cited by 1,748
Porous Organic Materials: Strategic Design and Structure–Function Correlation
Das, S., Heasman, P., Ben, T., & Qiu, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00439 · Cited by 1,286
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Functional carbon nitride materials — design strategies for electrochemical devices
Kessler, F. K., Zheng, Y., Schwarz, D., Merschjann, C., Schnick, W., Wang, X., & Bojdys, M. J. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.30 · Cited by 1,075
Metadata
- Authors
- Kuhn, P., Forget, A., Su, D., Thomas, A., & Antonietti, M.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-09-13
- Volume
- 130
- Issue
- 40
- Pages
- 13333-13337
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W1986575958
- Cited by
- 556
- References
- 17
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.