The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ladder-Type Oligo-p-phenylene-Containing Copolymers with High Open-Circuit Voltages and Ambient Photovoltaic Activity
Abstract
Four ladder-type oligo-p-phenylene containing donor-acceptor copolymers were designed, synthesized, and characterized. The ladder-type oligo-p-phenylene was used as an electron donor unit in these copolymers to provide a deeper highest occupied molecular orbital (HOMO) level for obtaining polymer solar cells with a higher open-circuit voltage, while 4,7-dithien-2-yl-2,1,3-benzothiadiazole or 5,8-dithien-2-yl-2,3-diphenylquinoxaline was chosen as an electron acceptor unit to tune the electronic band gaps of the polymers for a better light harvesting ability. These copolymers exhibit field-effect mobilities as high as 0.011 cm(2)/(V s). Compared to fluorene containing copolymers with the same acceptor unit, these ladder-type oligo-p-phenylene containing copolymers have enhanced and bathochromically shifted absorption bands and much better solubility in organic solvents. Photovoltaic applications of these polymers as light-harvesting and hole-conducting materials are investigated in conjunction with [6,6]-phenyl-C61-butyric acid methyl ester (PC(61)BM) or [6,6]-phenyl-C71-butyric acid methyl ester (PC(71)BM). Without extensive optimization work, a power conversion efficiency (PCE) of 3.7% and a high open-circuit voltage of 1.06 V are obtained under simulated solar light AM 1.5 G (100 mW/cm(2)) from a solar cell with an active layer containing 20 wt % ladder-type tetra-p-phenylene containing copolymer (P3FTBT6) and 80 wt % PC(61)BM. Moreover, a high PCE of 4.5% was also achieved from a solar cell with an active layer containing 20 wt % P3FTBT6 and 80 wt % PC(71)BM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Cited by
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Zhou, H., Yang, L., & You, W. (2012) · Macromolecules · doi:10.1021/ma201648t · Cited by 1,501
Designing π-conjugated polymers for organic electronics
Guo, X., Baumgarten, M., & Müllen, K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.005 · Cited by 836
A Thieno[3,4-c]pyrrole-4,6-dione-Based Copolymer for Efficient Solar Cells
Zou, Y., Najari, A., Berrouard, P., Beaupré, S., Réda Aïch, B., Tao, Y., & Leclerc, M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja101888b · Cited by 769
Donor–acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
Wu, J.-S., Cheng, S.-W., Cheng, Y.-J., & Hsu, C.-S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00250d · Cited by 629
Applications of ZnO in organic and hybrid solar cells
Huang, J., Yin, Z., & Zheng, Q. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01873f · Cited by 578
Self-citation
Metadata
- Authors
- Zheng, Q., Jung, B. J., Sun, J., & Katz, H. E.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-26
- Volume
- 132
- Issue
- 15
- Pages
- 5394-5404
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W4245797826
- Cited by
- 217
- References
- 1
- FWCI
- 27.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ladder-Type Oligo-p-phenylene-Containing Copolymers with High Open-Circuit Voltages and Ambient Photovoltaic Activity. https://app.cochat.ai/papers/10.1021/ja909111p
- The paper
- Zheng, Q., Jung, B. J., Sun, J., & Katz, H. E. (2010). Ladder-Type Oligo-p-phenylene-Containing Copolymers with High Open-Circuit Voltages and Ambient Photovoltaic Activity. Journal of the American Chemical Society. https://doi.org/10.1021/ja909111p
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.