The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency
Abstract
Passivating surface and bulk defects of perovskite films has been proven to be an effective way to minimize nonradiative recombination losses in perovskite solar cells (PVSCs). The lattice interference and perturbation of atomic periodicity at the perovskite surfaces often significantly affect the material properties and device efficiencies. By tailoring the terminal groups on the perovskite surface and modifying the surface chemical environment, the defects can be reduced to enhance the photovoltaic performance and stability of derived PVSCs. Here, we report a rationally designed bifunctional molecule, piperazinium iodide ( PI ), containing both R 2 NH and R 2 NH 2 + groups on the same six-membered ring, behaving both as an electron donor and an electron acceptor to react with different surface-terminating ends on perovskite films. The resulting perovskite films after defect passivation show released surface residual stress, suppressed nonradiative recombination loss, and more n -type characteristics for sufficient energy transfer. Consequently, charge recombination is significantly suppressed to result in a high open-circuit voltage ( V OC ) of 1.17 V and a reduced V OC loss of 0.33 V. A very high power conversion efficiency (PCE) of 23.37% (with 22.75% certified) could be achieved, which is the highest value reported for inverted PVSCs. Our work reveals a very effective way of using rationally designed bifunctional molecules to simultaneously enhance the device performance and stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Cited by
Minimizing buried interfacial defects for efficient inverted perovskite solar cells
Zhang, S., Ye, F., Wang, X., Chen, R., Zhang, H., Zhan, L., Jiang, X., Li, Y., Ji, X., Liu, S., et al. (2023) · Science · doi:10.1126/science.adg3755 · Cited by 1,159
Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Self-citationReducing nonradiative recombination in perovskite solar cells with a porous insulator contact
Peng, W., Mao, K., Cai, F., Meng, H., Zhu, Z., Li, T., Yuan, S., Xu, Z., Feng, X., Xu, J., et al. (2023) · Science · doi:10.1126/science.ade3126 · Cited by 666
Self-citationSurface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Optimized carrier extraction at interfaces for 23.6% efficient tin–lead perovskite solar cells
Hu, S., Otsuka, K., Murdey, R., Nakamura, T., Truong, M. A., Yamada, T., Handa, T., Matsuda, K., Nakano, K., Sato, A., et al. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00288d · Cited by 467
23.7% Efficient inverted perovskite solar cells by dual interfacial modification
Degani, M., An, Q., Albaladejo-Siguan, M., Hofstetter, Y. J., Cho, C., Paulus, F., Grancini, G., & Vaynzof, Y. (2021) · Science Advances · doi:10.1126/sciadv.abj7930 · Cited by 446
Rapid advances enabling high-performance inverted perovskite solar cells
Jiang, Q., & Zhu, K. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00678-x · Cited by 410
Li, H., Zhang, C., Gong, C., Zhang, D., Zhang, H., Zhuang, Q., Yu, X., Gong, S., Chen, X., Yang, J., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01295-8 · Cited by 404
Tailoring passivators for highly efficient and stable perovskite solar cells
Zhang, H., Pfeifer, L., Zakeeruddin, S. M., Chu, J., & Grätzel, M. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00510-0 · Cited by 386
Liu, M., Bi, L., Jiang, W., Zeng, Z., Tsang, S., Lin, F. R., & Jen, A. K. ‐. (2023) · Advanced Materials · doi:10.1002/adma.202304415 · Cited by 378
Self-citationHydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability
Li, F., Deng, X., Shi, Z., Wu, S., Zeng, Z., Wang, D., Li, Y., Qi, F., Zhang, Z., Yang, Z., et al. (2023) · Nature Photonics · doi:10.1038/s41566-023-01180-6 · Cited by 368
Self-citationOrganic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Rationalization of passivation strategies toward high-performance perovskite solar cells
Zhang, Z., Qiao, L., Meng, K., Long, R., Chen, G., & Gao, P. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00217e · Cited by 357
Jiang, W., Li, F., Li, M., Qi, F., Lin, F. R., & Jen, A. K. ‐. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202213560 · Cited by 331
Self-citationMolecular cation and low-dimensional perovskite surface passivation in perovskite solar cells
Teale, S., Degani, M., Chen, B., Sargent, E. H., & Grancini, G. (2024) · Nature Energy · doi:10.1038/s41560-024-01529-3 · Cited by 302
Understanding Performance Limiting Interfacial Recombination in pin Perovskite Solar Cells
Warby, J., Zu, F., Zeiske, S., Gutierrez‐Partida, E., Frohloff, L., Kahmann, S., Frohna, K., Mosconi, E., Radicchi, E., Lang, F., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103567 · Cited by 297
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Gharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Han, Y., Yue, S., & Cui, B. (2021) · Advanced Science · doi:10.1002/advs.202004805 · Cited by 282
Zhou, Y., Herz, L. M., Jen, A. K.-Y., & Saliba, M. (2022) · Nature Energy · doi:10.1038/s41560-022-01096-5 · Cited by 281
Self-citationPTAA as Efficient Hole Transport Materials in Perovskite Solar Cells: A Review
Wang, Y., Duan, L., Zhang, M., Hameiri, Z., Liu, X., Bai, Y., & Hao, X. (2022) · Solar RRL · doi:10.1002/solr.202200234 · Cited by 277
Buried Interface Modification in Perovskite Solar Cells: A Materials Perspective
Gao, Z., Wang, Y., & Choy, W. C. H. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202104030 · Cited by 271
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Self-citation
Metadata
- Authors
- Li, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., Zhang, J., Lu, X., Lei, D., Lee, C.-S., Zhu, Z., & Jen, A. K.-Y.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-16
- Volume
- 142
- Issue
- 47
- Pages
- 20134-20142
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3106462634
- Cited by
- 655
- References
- 44
- FWCI
- 32.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.