The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Perovskite Solar Cells with Near 100% Internal Quantum Efficiency Based on Large Single Crystalline Grains and Vertical Bulk Heterojunctions
Open accessAbstract
Imperfections in organometal halide perovskite films such as grain boundaries (GBs), defects, and traps detrimentally cause significant nonradiative recombination energy loss and decreased power conversion efficiency (PCE) in solar cells. Here, a simple layer-by-layer fabrication process based on air exposure followed by thermal annealing is reported to grow perovskite films with large, single-crystal grains and vertically oriented GBs. The hole-transport medium Spiro-OMeTAD is then infiltrated into the GBs to form vertically aligned bulk heterojunctions. Due to the space-charge regions in the vicinity of GBs, the nonradiative recombination in GBs is significantly suppressed. The GBs become active carrier collection channels. Thus, the internal quantum efficiencies of the devices approach 100% in the visible spectrum range. The optimized cells yield an average PCE of 16.3 ± 0.9%, comparable to the best solution-processed perovskite devices, establishing them as important alternatives to growing ideal single crystal thin films in the pursuit toward theoretical maximum PCE with industrially realistic processing techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Cited by
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films
Shao, Y., Fang, Y., Li, T., Wang, Q., Dong, Q., Deng, Y., Yuan, Y., Wei, H., Wang, M., Gruverman, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00413j · Cited by 1,231
Stable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation
Niu, T., Lu, J., Munir, R., Li, J., Barrit, D., Zhang, X., Hu, H., Yang, Z., Amassian, A., Zhao, K., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706576 · Cited by 797
Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature
Albrecht, S., Saliba, M., Correa Baena, J. P., Lang, F., Kegelmann, L., Mews, M., Steier, L., Abate, A., Rappich, J., Korte, L., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02965a · Cited by 649
Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Thin Insulating Tunneling Contacts for Efficient and Water‐Resistant Perovskite Solar Cells
Wang, Q., Dong, Q., Li, T., Gruverman, A., & Huang, J. (2016) · Advanced Materials · doi:10.1002/adma.201600969 · Cited by 633
Bulk heterojunction perovskite–PCBM solar cells with high fill factor
Chiang, C.-H., & Wu, C.-G. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.3 · Cited by 624
It's a trap! On the nature of localised states and charge trapping in lead halide perovskites
Jin, H., Debroye, E., Keshavarz, M., Scheblykin, I. G., Roeffaers, M. B. J., Hofkens, J., & Steele, J. A. (2020) · Materials Horizons · doi:10.1039/c9mh00500e · Cited by 589
Defects engineering for high-performance perovskite solar cells
Wang, F., Bai, S., Tress, W., Hagfeldt, A., & Gao, F. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0035-z · Cited by 568
Huang, C., Fu, W., Li, C.-Z., Zhang, Z., Qiu, W., Shi, M., Heremans, P., Jen, A. K.-Y., & Chen, H. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00039 · Cited by 489
Color-Pure Violet-Light-Emitting Diodes Based on Layered Lead Halide Perovskite Nanoplates
Liang, D., Peng, Y., Fu, Y., Shearer, M. J., Zhang, J., Zhai, J., Zhang, Y., Hamers, R. J., Andrew, T. L., & Jin, S. (2016) · ACS Nano · doi:10.1021/acsnano.6b02683 · Cited by 447
Bi, D., Li, X., Milić, J. V., Kubicki, D. J., Pellet, N., Luo, J., LaGrange, T., Mettraux, P., Emsley, L., Zakeeruddin, S. M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06709-w · Cited by 339
Metal Halide Perovskites in Quantum Dot Solar Cells: Progress and Prospects
Yuan, J., Hazarika, A., Zhao, Q., Ling, X., Moot, T., Ma, W., & Luther, J. M. (2020) · Joule · doi:10.1016/j.joule.2020.04.006 · Cited by 307
Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites
Chu, Z., Yang, M., Schulz, P., Wu, D., Ma, X., Seifert, E., Sun, L., Li, X., Zhu, K., & Lai, K. (2017) · Nature Communications · doi:10.1038/s41467-017-02331-4 · Cited by 288
Sharenko, A., & Toney, M. F. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10723 · Cited by 242
Metadata
- Authors
- Yang, B., Dyck, O., Poplawsky, J., Keum, J., Puretzky, A., Das, S., Ivanov, I., Rouleau, C., Duscher, G., Geohegan, D., & Xiao, K.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-07-16
- Volume
- 137
- Issue
- 29
- Pages
- 9210-9213
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2280471489
- Cited by
- 277
- References
- 23
- FWCI
- 23.58
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.