The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
All-Inorganic Perovskite Solar Cells
Abstract
The research field on perovskite solar cells (PSCs) is seeing frequent record breaking in the power conversion efficiency (PCE). However, organic-inorganic hybrid halide perovskites and organic additives in common hole-transport materials (HTMs) exhibit poor stability against moisture and heat. Here we report the successful fabrication of all-inorganic PSCs without any labile or expensive organic components. The entire fabrication process can be operated in ambient environment without humidity control (e.g., a glovebox). Even without encapsulation, the all-inorganic PSCs present no performance degradation in humid air (90-95% relative humidity, 25 °C) for over 3 months (2640 h) and can endure extreme temperatures (100 and -22 °C). Moreover, by elimination of expensive HTMs and noble-metal electrodes, the cost was significantly reduced. The highest PCE of the first-generation all-inorganic PSCs reached 6.7%. This study opens the door for next-generation PSCs with long-term stability under harsh conditions, making practical application of PSCs a real possibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Cited by
Li, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Thermal unequilibrium of strained black CsPbI 3 thin films
Steele, J. A., Jin, H., Dovgaliuk, I., Berger, R. F., Braeckevelt, T., Yuan, H., Martin, C., Solano, E., Lejaeghere, K., Rogge, S. M. J., et al. (2019) · Science · doi:10.1126/science.aax3878 · Cited by 661
Self-citationHigh spectral resolution of gamma-rays at room temperature by perovskite CsPbBr3 single crystals
He, Y., Matei, L., Jung, H. J., McCall, K. M., Chen, M., Stoumpos, C. C., Liu, Z., Peters, J. A., Chung, D. Y., Wessels, B. W., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04073-3 · Cited by 626
Bao, C., Yang, J., Bai, S., Xu, W., Yan, Z., Xu, Q., Liu, J., Zhang, W., & Gao, F. (2018) · Advanced Materials · doi:10.1002/adma.201803422 · Cited by 567
Self-citationBismuth Incorporation Stabilized α-CsPbI3 for Fully Inorganic Perovskite Solar Cells
Hu, Y., Bai, F., Liu, X., Ji, Q., Miao, X., Qiu, T., & Zhang, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00508 · Cited by 547
Self-citationLiang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07949 · Cited by 529
Self-citationRecent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency
Duan, J., Zhao, Y., He, B., & Tang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800019 · Cited by 514
Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Li, C., Zang, Z., Han, C., Hu, Z., Tang, X., Du, J., Leng, Y., & Sun, K. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.013 · Cited by 479
Zeng, Q., Zhang, X., Feng, X., Lu, S., Chen, Z., Yong, X., Redfern, S. A. T., Wei, H., Wang, H., Shen, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705393 · Cited by 464
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
Wu, L., Hu, H., Xu, Y., Jiang, S., Chen, M., Zhong, Q., Yang, D., Liu, Q., Zhao, Y., Sun, B., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02896 · Cited by 442
Reduced-Dimensional α-CsPbX3 Perovskites for Efficient and Stable Photovoltaics
Jiang, Y., Yuan, J., Ni, Y., Yang, J., Wang, Y., Jiu, T., Yuan, M., & Chen, J. (2018) · Joule · doi:10.1016/j.joule.2018.05.004 · Cited by 429
Self-citationInterface Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Yan, L., Xue, Q., Liu, M., Zhu, Z., Tian, J., Li, Z., Chen, Z., Chen, Z., Yan, H., Yip, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802509 · Cited by 404
Xiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
Perovskite‐Based Phototransistors and Hybrid Photodetectors
Xie, C., Liu, C., Loi, H., & Yan, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903907 · Cited by 376
Inorganic Halide Perovskite Solar Cells: Progress and Challenges
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C. J., & Yip, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000183 · Cited by 372
Optimization of an inorganic lead free RbGeI3 based perovskite solar cell by SCAPS-1D simulation
Pindolia, G., Shinde, S. M., & Jha, P. K. (2022) · Solar Energy · doi:10.1016/j.solener.2022.03.053 · Cited by 356
Carbon-based materials for stable, cheaper and large-scale processable perovskite solar cells
Fagiolari, L., & Bella, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02115a · Cited by 355
Chen, W., Zhang, J., Xu, G., Xue, R., Li, Y., Zhou, Y., Hou, J., & Li, Y. (2018) · Advanced Materials · doi:10.1002/adma.201800855 · Cited by 348
Efficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations
Wang, Y., Zhang, T., Kan, M., Li, Y., Wang, T., & Zhao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.013 · Cited by 348
Self-citationGu, X., Xiang, W., Tian, Q., & Liu, S. (. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202109724 · Cited by 342
Zhang, J., Bai, D., Jin, Z., Bian, H., Wang, K., Sun, J., Wang, Q., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703246 · Cited by 338
Self-citationLiu, X., Tan, X., Liu, Z., Ye, H., Sun, B., Shi, T., Tang, Z., & Liao, G. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.053 · Cited by 338
Yuan, J., Ling, X., Yang, D., Li, F., Zhou, S., Shi, J., Qian, Y., Hu, J., Sun, Y., Yang, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.011 · Cited by 333
Metal Halide Perovskites in Quantum Dot Solar Cells: Progress and Prospects
Yuan, J., Hazarika, A., Zhao, Q., Ling, X., Moot, T., Ma, W., & Luther, J. M. (2020) · Joule · doi:10.1016/j.joule.2020.04.006 · Cited by 307
Hossain, M. K., Mohammed, M. K. A., Pandey, R., Arnab, A. A., Rubel, M. H. K., Hossain, K. M., Ali, M. H., Rahman, M. F., Bencherif, H., Madan, J., et al. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00035 · Cited by 301
Stability of all-inorganic perovskite solar cells
Ouedraogo, N. A. N., Chen, Y., Xiao, Y. Y., Meng, Q., Han, C. B., Yan, H., & Zhang, Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104249 · Cited by 291
He, X., Qiu, Y., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201700775 · Cited by 285
Highly Air-Stable Carbon-Based α-CsPbI3 Perovskite Solar Cells with a Broadened Optical Spectrum
Xiang, S., Fu, Z., Li, W., Wei, Y., Liu, J., Liu, H., Zhu, L., Zhang, R., & Chen, H. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00820 · Cited by 280
Self-citationTong, G., Chen, T., Li, H., Qiu, L., Liu, Z., Dang, Y., Song, W., Ono, L. K., Jiang, Y., & Qi, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104015 · Cited by 274
Self-citationLow-temperature carbon-based electrodes in perovskite solar cells
Bogachuk, D., Zouhair, S., Wojciechowski, K., Yang, B., Babu, V., Wagner, L., Xu, B., Lim, J., Mastroianni, S., Pettersson, H., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02175j · Cited by 268
Narrowband Perovskite Photodetector-Based Image Array for Potential Application in Artificial Vision
Xue, J., Zhu, Z., Xu, X., Gu, Y., Wang, S., Xu, L., Zou, Y., Song, J., Zeng, H., & Chen, Q. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b03209 · Cited by 266
All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics
Ullah, S., Wang, J., Yang, P., Liu, L., Yang, S.-E., Xia, T., Guo, H., & Chen, Y. (2021) · Materials Advances · doi:10.1039/d0ma00866d · Cited by 261
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Faheem, M. B., Khan, B., Feng, C., Farooq, M. U., Raziq, F., Xiao, Y., & Li, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02338 · Cited by 254
Semitransparent Perovskite Solar Cells: From Materials and Devices to Applications
Shi, B., Duan, L., Zhao, Y., Luo, J., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.201806474 · Cited by 253
A Low-Cost and High-Efficiency Integrated Device toward Solar-Driven Water Splitting
Liang, J., Han, X., Qiu, Y., Fang, Q., Zhang, B., Wang, W., Zhang, J., Ajayan, P. M., & Lou, J. (2020) · ACS Nano · doi:10.1021/acsnano.9b09053 · Cited by 68
Self-citationChen, Y., Zhao, C., Zhang, T., Wu, X., Zhang, W., & Ding, S. (2021) · Small · doi:10.1002/smll.202007543 · Cited by 30
Self-powered photodetector based on a CsPbBr 3 /n-Si Schottky junction
Hua, F., Du, X., Huang, Z., Gu, Y., Wen, J., Liu, F., Chen, J., & Tang, T. (2024) · Journal of the Optical Society of America B · doi:10.1364/josab.503296 · Cited by 9
Metadata
- Authors
- Liang, J., Wang, C., Wang, Y., Xu, Z., Lu, Z., Ma, Y., Zhu, H., Hu, Y., Xiao, C., Yi, X., Zhu, G., Lv, H., Ma, L., Chen, T., Tie, Z., Jin, Z., & Liu, J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-11-30
- Volume
- 138
- Issue
- 49
- Pages
- 15829-15832
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2549721664
- Cited by
- 1,089
- References
- 33
- FWCI
- 52.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.