The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
A Breakthrough Efficiency of 19.9% Obtained in Inverted Perovskite Solar Cells by Using an Efficient Trap State Passivator Cu(thiourea)I
Abstract
It is extremely significant to study the trap state passivation and minimize the trap states of perovskite to achieve high-performance perovskite solar cells (PSCs). Here, we have first revealed and demonstrated that a novel p-type conductor Cu(thiourea)I [Cu(Tu)I] incorporated in perovskite layer can effectively passivate the trap states of perovskite via interacting with the under-coordinated metal cations and halide anions at the perovskite crystal surface. The trap state energy level of perovskite can be shallowed from 0.35-0.45 eV to 0.25-0.35 eV. In addition, the incorporated Cu(Tu)I can participate in constructing the p-i bulk heterojunctions with perovskite, leading to an increase of the depletion width from 126 to 265 nm, which is advantageous for accelerating hole transport and reducing charge carrier recombination. For these two synergistic effects, Cu(Tu)I can play a much better role than that of the traditional p-type conductor CuI, probably due to its identical valence band maximum with that of perovskite, which enables to not only lower the trap state energy level to a greater extent but also eliminate the potential wells for holes at the p-i heterojunctions. After optimization, a breakthrough efficiency of 19.9% has been obtained in the inverted PSCs with Cu(Tu)I as the trap state passivator of perovskite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Bu, T., Li, J., Zheng, F., Chen, W., Wen, X., Ku, Z., Peng, Y., Zhong, J., Cheng, Y.-B., & Huang, F. (2018) · Nature Communications · doi:10.1038/s41467-018-07099-9 · Cited by 815
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Stable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation
Niu, T., Lu, J., Munir, R., Li, J., Barrit, D., Zhang, X., Hu, H., Yang, Z., Amassian, A., Zhao, K., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706576 · Cited by 797
Inverted perovskite solar cells using dimethylacridine-based dopants
Tan, Q., Li, Z., Luo, G., Zhang, X., Che, B., Chen, G., Gao, H., He, D., Ma, G., Wang, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06207-0 · Cited by 786
Self-citationCauses and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Self-citationSynthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Origins and influences of metallic lead in perovskite solar cells
Liang, J., Hu, X., Wang, C., Liang, C., Chen, C., Xiao, M., Li, J., Tao, C., Xing, G., Yu, R., et al. (2022) · Joule · doi:10.1016/j.joule.2022.03.005 · Cited by 576
Defects engineering for high-performance perovskite solar cells
Wang, F., Bai, S., Tress, W., Hagfeldt, A., & Gao, F. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0035-z · Cited by 568
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Self-citationStability of perovskite solar cells: issues and prospects
Chowdhury, T. A., Bin Zafar, M. A., Sajjad-Ul Islam, M., Shahinuzzaman, M., Islam, M. A., & Khandaker, M. U. (2023) · RSC Advances · doi:10.1039/d2ra05903g · Cited by 444
Dunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
Wu, W.-Q., Wang, Q., Fang, Y., Shao, Y., Tang, S., Deng, Y., Lu, H., Liu, Y., Li, T., Yang, Z., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04028-8 · Cited by 430
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Rapid advances enabling high-performance inverted perovskite solar cells
Jiang, Q., & Zhu, K. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00678-x · Cited by 410
Tailoring passivators for highly efficient and stable perovskite solar cells
Zhang, H., Pfeifer, L., Zakeeruddin, S. M., Chu, J., & Grätzel, M. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00510-0 · Cited by 386
Lead-chelating hole-transport layers for efficient and stable perovskite minimodules
Fei, C., Li, N., Wang, M., Wang, X., Gu, H., Chen, B., Zhang, Z., Ni, Z., Jiao, H., Xu, W., et al. (2023) · Science · doi:10.1126/science.ade9463 · Cited by 372
Rationalization of passivation strategies toward high-performance perovskite solar cells
Zhang, Z., Qiao, L., Meng, K., Long, R., Chen, G., & Gao, P. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00217e · Cited by 357
A brief review of hole transporting materials commonly used in perovskite solar cells
Li, S., Cao, Y., Li, W., & Bo, Z. (2021) · Rare Metals · doi:10.1007/s12598-020-01691-z · Cited by 346
Bi, D., Li, X., Milić, J. V., Kubicki, D. J., Pellet, N., Luo, J., LaGrange, T., Mettraux, P., Emsley, L., Zakeeruddin, S. M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06709-w · Cited by 339
Jiang, F., Yang, D., Jiang, Y., Liu, T., Zhao, X., Ming, Y., Luo, B., Qin, F., Fan, J., Han, H., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10739 · Cited by 317
Self-citationPerovskite Solar Cells: Can We Go Organic‐Free, Lead‐Free, and Dopant‐Free?
Miyasaka, T., Kulkarni, A., Kim, G. M., Öz, S., & Jena, A. K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902500 · Cited by 293
Yang, J., Liu, C., Cai, C., Hu, X., Huang, Z., Duan, X., Meng, X., Yuan, Z., Tan, L., & Chen, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900198 · Cited by 289
Powalla, M., Paetel, S., Ahlswede, E., Wuerz, R., Wessendorf, C. D., & Magorian Friedlmeier, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5061809 · Cited by 281
Impacts of alkaline on the defects property and crystallization kinetics in perovskite solar cells
Chen, Y., Li, N., Wang, L., Li, L., Xu, Z., Jiao, H., Liu, P., Zhu, C., Zai, H., Sun, M., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09093-1 · Cited by 277
Self-citationZhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Liang, L., Luo, H., Hu, J., Li, H., & Gao, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000197 · Cited by 260
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Metadata
- Authors
- Ye, S., Rao, H., Zhao, Z., Zhang, L., Bao, H., Sun, W., Li, Y., Gu, F., Wang, J., Liu, Z., Bian, Z., & Huang, C.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-24
- Volume
- 139
- Issue
- 22
- Pages
- 7504-7512
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2612771452
- Cited by
- 401
- References
- 65
- FWCI
- 19.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.