The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Pressure Effects on Structure and Optical Properties in Cesium Lead Bromide Perovskite Nanocrystals
Abstract
Metal halide perovskites (MHPs) are gaining increasing interest because of their extraordinary performance in optoelectronic devices and solar cells. However, developing an effective strategy for achieving the band-gap engineering of MHPs that will satisfy the practical applications remains a great challenge. In this study, high pressure is introduced to tailor the optical and structural properties of MHP-based cesium lead bromide nanocrystals (CsPbBr 3 NCs), which exhibit excellent thermodynamic stability. Both the pressure-dependent steady-state photoluminescence and absorption spectra experience a stark discontinuity at ∼1.2 GPa, where an isostructural phase transformation regarding the Pbnm space group occurs. The physical origin points to the repulsive force impact due to the overlap between the valence electron charge clouds of neighboring layers. Simultaneous band-gap narrowing and carrier-lifetime prolongation of CsPbBr 3 trihalide perovskite NCs were also achieved as expected, which facilitates the broader solar spectrum absorption for photovoltaic applications. Note that the values of the phase change interval and band-gap red-shift of CsPbBr 3 nanowires are between those for CsPbBr 3 nanocubes and the corresponding bulk counterparts, which results from the unique geometrical morphology effect. First-principles calculations unravel that the band-gap engineering is governed by orbital interactions within the inorganic Pb–Br frame through structural modification. Changes of band structures are attributed to the synergistic effect of pressure-induced modulations of the Br–Pb bond length and Pb–Br–Pb bond angle for the PbBr 6 octahedral framework. Furthermore, the significant distortion of the lead–bromide octahedron to accommodate the Jahn–Teller effect at much higher pressure would eventually lead to a direct to indirect band-gap electronic transition. This study enables high pressure as a robust tool to control the structure and band gap of CsPbBr 3 NCs, thus providing insight into the microscopic physiochemical mechanism of these compressed MHP nanosystems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
First principles methods using CASTEP
Clark, S. J., Segall, M. D., Pickard, C. J., Hasnip, P. J., Probert, M. I. J., Refson, K., & Payne, M. C. (2005) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.220.5.567.65075 · Cited by 14,633
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Two-dimensional detector software: From real detector to idealised image or two-theta scan
Hammersley, A. P., Svensson, S. O., Hanfland, M., Fitch, A. N., & Hausermann, D. (1996) · High Pressure Research · doi:10.1080/08957959608201408 · Cited by 4,674
Calibration of the ruby pressure gauge to 800 kbar under quasi‐hydrostatic conditions
Mao, H. K., Xu, J., & Bell, P. M. (1986) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb091ib05p04673 · Cited by 4,448
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Nedelcu, G., Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Grotevent, M. J., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02404 · Cited by 2,356
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Halide perovskite materials for solar cells: a theoretical review
Yin, W.-J., Yang, J.-H., Kang, J., Yan, Y., & Wei, S.-H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05033a · Cited by 1,437
Wang, Y., Li, X., Song, J., Xiao, L., Zeng, H., & Sun, H. (2015) · Advanced Materials · doi:10.1002/adma.201503573 · Cited by 1,267
Bekenstein, Y., Koscher, B. A., Eaton, S. W., Yang, P., & Alivisatos, A. P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11199 · Cited by 1,169
Design of Lead-Free Inorganic Halide Perovskites for Solar Cells via Cation-Transmutation
Zhao, X.-G., Yang, J.-H., Fu, Y., Yang, D., Xu, Q., Yu, L., Wei, S.-H., & Zhang, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09645 · Cited by 1,003
Solution-Phase Synthesis of Cesium Lead Halide Perovskite Nanowires
Zhang, D., Eaton, S. W., Yu, Y., Dou, L., & Yang, P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05404 · Cited by 1,002
Li, X., Cao, F., Yu, D., Chen, J., Sun, Z., Shen, Y., Zhu, Y., Wang, L., Wei, Y., Wu, Y., et al. (2017) · Small · doi:10.1002/smll.201603996 · Cited by 704
Self-citationZhang, D., Yang, Y., Bekenstein, Y., Yu, Y., Gibson, N. A., Wong, A. B., Eaton, S. W., Kornienko, N., Kong, Q., Lai, M., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03134 · Cited by 459
Jaffe, A., Lin, Y., Beavers, C. M., Voss, J., Mao, W. L., & Karunadasa, H. I. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00055 · Cited by 448
Indirect to direct bandgap transition in methylammonium lead halide perovskite
Wang, T., Daiber, B., Frost, J. M., Mann, S. A., Garnett, E. C., Walsh, A., & Ehrler, B. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03474h · Cited by 418
Wang, Y., Lü, X., Yang, W., Wen, T., Yang, L., Ren, X., Wang, L., Lin, Z., & Zhao, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06346 · Cited by 393
Self-citationKong, L., Liu, G., Gong, J., Hu, Q., Schaller, R. D., Dera, P., Zhang, D., Liu, Z., Yang, W., Zhu, K., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1609030113 · Cited by 354
On the crystal structure of colloidally prepared CsPbBr3 quantum dots
Cottingham, P., & Brutchey, R. L. (2016) · Chemical Communications · doi:10.1039/c6cc01088a · Cited by 315
Nagaoka, Y., Hills‐Kimball, K., Tan, R., Li, R., Wang, Z., & Chen, O. (2017) · Advanced Materials · doi:10.1002/adma.201606666 · Cited by 291
Ultrathin Colloidal Cesium Lead Halide Perovskite Nanowires
Zhang, D., Yu, Y., Bekenstein, Y., Wong, A. B., Alivisatos, A. P., & Yang, P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08373 · Cited by 279
Wu, B., Zhou, Y., Xing, G., Xu, Q., Garces, H. F., Solanki, A., Goh, T. W., Padture, N. P., & Sum, T. C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604818 · Cited by 239
Lü, X., Wang, Y., Stoumpos, C. C., Hu, Q., Guo, X., Chen, H., Yang, L., Smith, J. S., Yang, W., Zhao, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600771 · Cited by 233
Wang, L., Wang, K., & Zou, B. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00999 · Cited by 227
Self-citationPressure-Induced Conductivity and Yellow-to-Black Piezochromism in a Layered Cu–Cl Hybrid Perovskite
Jaffe, A., Lin, Y., Mao, W. L., & Karunadasa, H. I. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512396m · Cited by 226
Liu, G., Kong, L., Gong, J., Yang, W., Mao, H., Hu, Q., Liu, Z., Schaller, R. D., Zhang, D., & Xu, T. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604208 · Cited by 225
Szafrański, M., & Katrusiak, A. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01648 · Cited by 217
Ou, T., Yan, J., Xiao, C., Shen, W., Liu, C., Liu, X., Han, Y., Ma, Y., & Gao, C. (2016) · Nanoscale · doi:10.1039/c5nr07842c · Cited by 113
Self-citationWang, Y., Bai, L., Wen, T. B., Yang, L., Gou, H., Xiao, Y., Chow, P. C., Pravica, M. G., Yang, W., & Zhao, Y. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605410 · Cited by 47
Unexpected Room‐Temperature Ferromagnetism in Nanostructured Bi 2 Te 3
Xiao, G., Zhu, C., Ma, Y., Liu, B., Zou, G., & Zou, B. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201309416 · Cited by 46
Self-citation
Cited by
Shamsi, J., Urban, A. S., Imran, M., De Trizio, L., & Manna, L. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00644 · Cited by 1,813
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Self-citationLeng, K., Abdelwahab, I., Verzhbitskiy, I., Telychko, M., Chu, L., Fu, W., Chi, X., Guo, N., Chen, Z., Chen, Z., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0164-8 · Cited by 404
Ellipsometric study of the complex optical constants of a CsPbBr 3 perovskite thin film
Zhao, M., Shi, Y., Dai, J., & Lian, J. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc03222j · Cited by 98
Metadata
- Authors
- Xiao, G., Cao, Y., Qi, G., Wang, L., Liu, C., Ma, Z., Yang, X., Sui, Y., Zheng, W., & Zou, B.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-18
- Volume
- 139
- Issue
- 29
- Pages
- 10087-10094
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2732528253
- Cited by
- 280
- References
- 32
- FWCI
- 11.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.