The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Ce3+-Doping to Modulate Photoluminescence Kinetics for Efficient CsPbBr3 Nanocrystals Based Light-Emitting Diodes
Abstract
Inorganic perovskite CsPbBr 3 nanocrystals (NCs) are emerging, highly attractive light emitters with high color purity and good thermal stability for light-emitting diodes (LEDs). Their high photo/electroluminescence efficiencies are very important for fabricating efficient LEDs. Here, we propose a novel strategy to enhance the photo/electroluminescence efficiency of CsPbBr 3 NCs through doping of heterovalent Ce 3+ ions via a facile hot-injection method. The Ce 3+ cation was chosen as the dopant for CsPbBr 3 NCs by virtue of its similar ion radius and formation of higher energy level of conduction band with bromine in comparison with the Pb 2+ cation to maintain the integrity of perovskite structure without introducing additional trap states. It was found that by increasing the doping amount of Ce 3+ in CsPbBr 3 NCs to 2.88% (atomic percentage of Ce compared to Pb) the photoluminescence quantum yield (PLQY) of CsPbBr 3 NCs reached up to 89%, a factor of 2 increase in comparison with the native, undoped ones. The ultrafast transient absorption and time-resolved photoluminescence (PL) spectroscopy revealed that Ce 3+ -doping can significantly modulate the PL kinetics to enhance the PL efficiency of doped CsPbBr 3 NCs. As a result, the LED device fabricated by adopting Ce 3+ -doped CsPbBr 3 NCs as the emitting layers exhibited a pronounced improvement of electroluminescence with external quantum efficiency (EQE) from 1.6 to 4.4% via Ce 3+ -doping.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Self-citationSolution-processed, high-performance light-emitting diodes based on quantum dots
Dai, X., Zhang, Z., Jin, Y., Niu, Y., Cao, H., Liang, X., Chen, L., Wang, J., & Peng, X. (2014) · Nature · doi:10.1038/nature13829 · Cited by 2,702
Nedelcu, G., Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Grotevent, M. J., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02404 · Cited by 2,356
Multicolored Organic/Inorganic Hybrid Perovskite Light‐Emitting Diodes
Kim, Y., Cho, H., Heo, J. H., Kim, T., Myoung, N., Lee, C., Im, S. H., & Lee, T. (2015) · Advanced Materials · doi:10.1002/adma.201403751 · Cited by 1,273
Li, J., Xu, L., Wang, T., Song, J., Chen, J., Xue, J., Dong, Y., Cai, B., Shan, Q., Han, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603885 · Cited by 1,176
Self-citationHighly Efficient Perovskite‐Quantum‐Dot Light‐Emitting Diodes by Surface Engineering
Pan, J., Quan, L. N., Zhao, Y., Peng, W., Murali, B., Sarmah, S. P., Yuan, M., Sinatra, L., Alyami, N. M., Liu, J., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600784 · Cited by 1,126
Solution-Phase Synthesis of Cesium Lead Halide Perovskite Nanowires
Zhang, D., Eaton, S. W., Yu, Y., Dou, L., & Yang, P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05404 · Cited by 1,002
Quantum Size Effect in Organometal Halide Perovskite Nanoplatelets
Sichert, J. A., Tong, Y., Mutz, N., Vollmer, M., Fischer, S., Milowska, K. Z., García Cortadella, R., Nickel, B., Cardenas-Daw, C., Stolarczyk, J. K., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02985 · Cited by 936
Li, G., Rivarola, F. W. R., Davis, N. J. L. K., Bai, S., Jellicoe, T. C., de la Peña, F., Hou, S., Ducati, C., Gao, F., Friend, R. H., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600064 · Cited by 901
Mn2+-Doped Lead Halide Perovskite Nanocrystals with Dual-Color Emission Controlled by Halide Content
Liu, W., Lin, Q., Li, H., Wu, K., Robel, I., Pietryga, J. M., & Klimov, V. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08085 · Cited by 898
Zou, S., Liu, Y., Li, J., Liu, C., Feng, R., Jiang, F., Li, Y., Song, J., Zeng, H., Hong, M., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04000 · Cited by 854
Self-citationHeavily Doped Semiconductor Nanocrystal Quantum Dots
Mocatta, D., Cohen, G., Schattner, J., Millo, O., Rabani, E., & Banin, U. (2011) · Science · doi:10.1126/science.1196321 · Cited by 758
van der Stam, W., Geuchies, J. J., Altantzis, T., van den Bos, K. H. W., Meeldijk, J. D., Van Aert, S., Bals, S., Vanmaekelbergh, D., & de Mello Donega, C. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13079 · Cited by 732
Zhang, X., Lin, H., Huang, H., Reckmeier, C., Zhang, Y., Choy, W. C. H., & Rogach, A. L. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04959 · Cited by 731
Pradhan, N., Goorskey, D., Thessing, J., & Peng, X. (2005) · Journal of the American Chemical Society · doi:10.1021/ja055557z · Cited by 713
Li, X., Cao, F., Yu, D., Chen, J., Sun, Z., Shen, Y., Zhu, Y., Wang, L., Wei, Y., Wu, Y., et al. (2017) · Small · doi:10.1002/smll.201603996 · Cited by 704
Self-citationExciton-to-Dopant Energy Transfer in Mn-Doped Cesium Lead Halide Perovskite Nanocrystals
Parobek, D., Roman, B. J., Dong, Y., Jin, H., Lee, E., Sheldon, M., & Son, D. H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b02772 · Cited by 670
Ultrafast Interfacial Electron and Hole Transfer from CsPbBr3 Perovskite Quantum Dots
Wu, K., Liang, G., Shang, Q., Ren, Y., Kong, D., & Lian, T. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08520 · Cited by 588
CsPbxMn1–xCl3 Perovskite Quantum Dots with High Mn Substitution Ratio
Liu, H., Wu, Z., Shao, J., Yao, D., Gao, H., Liu, Y., Yu, W., Zhang, H., & Yang, B. (2017) · ACS Nano · doi:10.1021/acsnano.6b08747 · Cited by 587
Enhanced Singlet Oxygen Generation in Oxidized Graphitic Carbon Nitride for Organic Synthesis
Wang, H., Jiang, S., Chen, S., Li, D., Zhang, X., Shao, W., Sun, X., Xie, J., Zhao, Z., Zhang, Q., et al. (2016) · Advanced Materials · doi:10.1002/adma.201601413 · Cited by 568
Self-citationMetal halide perovskite light emitters
Kim, Y.-H., Cho, H., & Lee, T.-W. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1607471113 · Cited by 549
Zhang, X., Xu, B., Zhang, J., Gao, Y., Zheng, Y., Wang, K., & Sun, X. W. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600958 · Cited by 493
Self-citationEngineering Interfacial Charge Transfer in CsPbBr3 Perovskite Nanocrystals by Heterovalent Doping
Begum, R., Parida, M. R., Abdelhady, A. L., Murali, B., Alyami, N. M., Ahmed, G. H., Hedhili, M. N., Bakr, O. M., & Mohammed, O. F. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09575 · Cited by 483
Kim, Y.-H., Wolf, C., Kim, Y.-T., Cho, H., Kwon, W., Do, S., Sadhanala, A., Park, C. G., Rhee, S.-W., Im, S. H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b07617 · Cited by 375
Mondal, N., & Samanta, A. (2017) · Nanoscale · doi:10.1039/c6nr09422h · Cited by 289
Exciton Dynamics in Semiconductor Nanocrystals
Wheeler, D. A., & Zhang, J. Z. (2013) · Advanced Materials · doi:10.1002/adma.201300362 · Cited by 263
Kim, Y.-H., Lee, G.-H., Kim, Y.-T., Wolf, C., Yun, H. J., Kwon, W., Park, C. G., & Lee, T.-W. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.002 · Cited by 227
Insights into the excitonic processes in polymeric photocatalysts
Wang, H., Jiang, S., Chen, S., Zhang, X., Shao, W., Sun, X., Zhao, Z., Zhang, Q., Luo, Y., & Xie, Y. (2017) · Chemical Science · doi:10.1039/c7sc00307b · Cited by 185
Self-citationShan, Q., Li, J., Song, J., Zou, Y., Xu, L., Xue, J., Dong, Y., Huo, C., Chen, J., Han, B., et al. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05578h · Cited by 166
Self-citationWei, S., Yang, Y., Kang, X., Wang, L., Huang, L., & Pan, D. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02763 · Cited by 65
Jia, Y., Poncé, S., Miglio, A., et al. (2017) · Advanced Optical Materials · doi:10.1002/adom.201600997 · Cited by 46
Zhang, Q., & Luo, Y. (2016) · High Power Laser Science and Engineering · doi:10.1017/hpl.2016.23 · Cited by 37
Self-citation
Cited by
Wei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Rare-Earth Doping in Nanostructured Inorganic Materials
Zheng, B., Fan, J., Chen, B., Qin, X., Wang, J., Wang, F., Deng, R., & Liu, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00644 · Cited by 1,204
Metal-Doped Lead Halide Perovskites: Synthesis, Properties, and Optoelectronic Applications
Zhou, Y., Chen, J., Bakr, O. M., & Sun, H.-T. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02989 · Cited by 650
Doping and ion substitution in colloidal metal halide perovskite nanocrystals
Lu, C.-H., Biesold-McGee, G. V., Liu, Y., Kang, Z., & Lin, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00790c · Cited by 484
Improving the Stability of Metal Halide Perovskite Quantum Dots by Encapsulation
Lv, W., Li, L., Xu, M., Hong, J., Tang, X., Xu, L., Wu, Y., Zhu, R., Chen, R., & Huang, W. (2019) · Advanced Materials · doi:10.1002/adma.201900682 · Cited by 462
Metadata
- Authors
- Yao, J.-S., Ge, J., Han, B.-N., Wang, K.-H., Yao, H.-B., Yu, H.-L., Li, J.-H., Zhu, B.-S., Song, J.-Z., Chen, C., Zhang, Q., Zeng, H.-B., Luo, Y., & Yu, S.-H.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-01-17
- Volume
- 140
- Issue
- 10
- Pages
- 3626-3634
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2782688141
- Cited by
- 549
- References
- 34
- FWCI
- 26.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.