The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Na3MnZr(PO4)3: A High-Voltage Cathode for Sodium Batteries
Abstract
Sodium batteries have been regarded as promising candidates for large-scale energy storage application, provided cathode hosts with high energy density and long cycle life can be found. Herein, we report NASICON-structured Na 3 MnZr(PO 4 ) 3 as a cathode for sodium batteries that exhibits an electrochemical performance superior to those of other manganese phosphate cathodes reported in the literature. Both the Mn 4+ /Mn 3+ and Mn 3+ /Mn 2+ redox couples are reversibly accessed in Na 3 MnZr(PO 4 ) 3, providing high discharge voltage plateaus at 4.0 and 3.5 V, respectively. A high discharge capacity of 105 mAh g –1 was obtained from Na 3 MnZr(PO 4 ) 3 with a small variation of lattice parameters and a small volume change on extraction of two Na + ions per formula unit. Moreover, Na 3 MnZr(PO 4 ) 3 exhibits an excellent cycling stability, retaining 91% of the initial capacity after 500 charge/discharge cycles at 0.5 C rate. On the basis of structural analysis and density functional theory calculations, we have proposed a detailed desodiation pathway from Na 3 MnZr(PO 4 ) 3 where Mn and Zr are disordered within the structure. We further show that the cooperative Jahn–Teller distortion of Mn 3+ is suppressed in the cathode and that Na 2 MnZr(PO 4 ) 3 is a stable phase.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Effective ionic radii in oxides and fluorides
Shannon, R. D., & Prewitt, C. T. (1969) · Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry · doi:10.1107/s0567740869003220 · Cited by 8,627
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationTowards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
A grid-based Bader analysis algorithm without lattice bias
Tang, W., Sanville, E., & Henkelman, G. (2009) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/21/8/084204 · Cited by 7,585
Self-citationResearch Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides
Aydinol, M. K., Kohan, A. F., Ceder, G., Cho, K., & Joannopoulos, J. (1997) · Physical Review B · doi:10.1103/physrevb.56.1354 · Cited by 1,388
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries
Han, M. H., Gonzalo, E., Singh, G., & Rojo, T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03192j · Cited by 1,380
Development and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Self-citationMasquelier, C., & Croguennec, L. (2013) · Chemical Reviews · doi:10.1021/cr3001862 · Cited by 1,210
You, Y., Wu, X.-L., Yin, Y.-X., & Guo, Y.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee44004d · Cited by 1,101
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
Wang, J., & Sun, X. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee01263k · Cited by 1,030
Layered Oxide Cathodes for Sodium‐Ion Batteries: Phase Transition, Air Stability, and Performance
Wang, P., You, Y., Yin, Y., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701912 · Cited by 994
Removal of Interstitial H2O in Hexacyanometallates for a Superior Cathode of a Sodium-Ion Battery
Song, J., Wang, L., Lu, Y., Liu, J., Guo, B., Xiao, P., Lee, J.-J., Yang, X.-Q., Henkelman, G., & Goodenough, J. B. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512383b · Cited by 966
Self-citationA 3.8-V earth-abundant sodium battery electrode
Barpanda, P., Oyama, G., Nishimura, S.-I., Chung, S.-C., & Yamada, A. (2014) · Nature Communications · doi:10.1038/ncomms5358 · Cited by 873
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
Self-citationCarbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries
Chen, S., Wu, C., Shen, L., Zhu, C., Huang, Y., Xi, K., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700431 · Cited by 705
Kim, H., Park, I., Seo, D.-H., Lee, S., Kim, S.-W., Kwon, W. J., Park, Y.-U., Kim, C. S., Jeon, S., & Kang, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3038646 · Cited by 592
Lee, H.-W., Wang, R. Y., Pasta, M., Woo Lee, S., Liu, N., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6280 · Cited by 590
Fang, Y., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2015) · Advanced Materials · doi:10.1002/adma.201502018 · Cited by 549
An Advanced Sodium‐Ion Battery Composed of Carbon Coated Na3V2(PO4)3 in a Porous Graphene Network
Rui, X., Sun, W., Wu, C., Yu, Y., & Yan, Q. (2015) · Advanced Materials · doi:10.1002/adma.201502864 · Cited by 545
Routes to High Energy Cathodes of Sodium‐Ion Batteries
Fang, C., Huang, Y., Zhang, W., Han, J., Deng, Z., Cao, Y., & Yang, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501727 · Cited by 531
LiMnPO4 – A next generation cathode material for lithium-ion batteries
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01393b · Cited by 466
Atomic Structure and Kinetics of NASICON NaxV2(PO4)3 Cathode for Sodium‐Ion Batteries
Jian, Z., Yuan, C., Han, W., Lu, X., Gu, L., Xi, X., Hu, Y., Li, H., Chen, W., Chen, D., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400173 · Cited by 417
Sodium storage in Na-rich Na FeFe(CN)6 nanocubes
Liu, Y., Qiao, Y., Zhang, W., Li, Z., Ji, X., Miao, L., Yuan, L., Hu, X., & Huang, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.01.012 · Cited by 368
LiMnPO4 Nanoplate Grown via Solid-State Reaction in Molten Hydrocarbon for Li-Ion Battery Cathode
Choi, D., Wang, D., Bae, I.-T., Xiao, J., Nie, Z., Wang, W., Viswanathan, V. V., Lee, Y. J., Zhang, J.-G., Graff, G. L., et al. (2010) · Nano Letters · doi:10.1021/nl1007085 · Cited by 367
The nasicon-type titanium phosphates Ati2(PO4)3 (A=Li, Na) as electrode materials
Delmas, C., Nadiri, A., & Soubeyroux, J. L. (1988) · Solid State Ionics · doi:10.1016/s0167-2738(88)80075-4 · Cited by 288
Understanding Anomalous Behavior in Coulombic Efficiency Measurements on Li-Ion Batteries
Gyenes, B., Stevens, D. A., Chevrier, V. L., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0191503jes · Cited by 248
Anomalous Jahn–Teller behavior in a manganese-based mixed-phosphate cathode for sodium ion batteries
Kim, H., Yoon, G., Park, I., Park, K.-Y., Lee, B., Kim, J., Park, Y.-U., Jung, S.-K., Lim, H.-D., Ahn, D., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01876e · Cited by 246
Qi, Y., Mu, L., Zhao, J., Hu, Y., Liu, H., & Dai, S. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503188 · Cited by 235
A new polymorph of Na2MnP2O7 as a 3.6 V cathode material for sodium-ion batteries
Barpanda, P., Ye, T., Avdeev, M., Chung, S.-C., & Yamada, A. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10210f · Cited by 196
Park, C. S., Kim, H., Shakoor, R. A., Yang, E., Lim, S. Y., Kahraman, R., Jung, Y., & Choi, J. W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312044k · Cited by 194
Cerrato, J. M., Hochella, M. F., Knocke, W. R., Dietrich, A. M., & Cromer, T. F. (2010) · Environmental Science & Technology · doi:10.1021/es100547q · Cited by 190
d'Yvoire, F., Pintard-Scrépel, M., Bretey, E., & de la Rochère, M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90101-7 · Cited by 182
Li2NaV2(PO4)3: A 3.7 V Lithium-Insertion Cathode with the Rhombohedral NASICON Structure
Cushing, B. L., & Goodenough, J. B. (2001) · Journal of Solid State Chemistry · doi:10.1006/jssc.2001.9213 · Cited by 144
Self-citationIron and Manganese Pyrophosphates as Cathodes for Lithium-Ion Batteries
Zhou, H., Upreti, S., Chernova, N. A., Hautier, G., Ceder, G., & Whittingham, M. S. (2010) · Chemistry of Materials · doi:10.1021/cm102922q · Cited by 141
Song, W., Cao, X., Wu, Z., Chen, J., Huangfu, K., Wang, X., Huang, Y., & Ji, X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp01821d · Cited by 130
A comparative study on Na2MnPO4F and Li2MnPO4F for rechargeable battery cathodes
Kim, S., Seo, D., Kim, H., Park, K.-Y., & Kang, K. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40082k · Cited by 125
Patoux, S., Rousse, G., Leriche, J., & Masquelier, C. (2003) · Chemistry of Materials · doi:10.1021/cm020479p · Cited by 102
Jiang, Y., Shi, J., Wang, M., Zeng, L., Gu, L., & Yu, Y. M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09811 · Cited by 88
Новикова, С. А., Larkovich, R. V., Chekannikov, A. A., Kulova, T. L., Skundin, A. M., & Yaroslavtsev, A. B. (2018) · Inorganic Materials · doi:10.1134/s0020168518080149 · Cited by 39
Cited by
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Polyanion-type cathode materials for sodium-ion batteries
Jin, T., Li, H., Zhu, K., Wang, P.-F., Liu, P., & Jiao, L. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00846b · Cited by 908
Shang, Y., Li, X., Song, J., Huang, S., Yang, Z., Xu, Z. J., & Yang, H. Y. (2020) · Chem · doi:10.1016/j.chempr.2020.05.004 · Cited by 397
Electrochemical energy storage devices working in extreme conditions
Chen, M., Zhang, Y., Xing, G., Chou, S.-L., & Tang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00271f · Cited by 346
Liu, Y., Li, J., Shen, Q., Zhang, J., He, P., Qu, X., & Liu, Y. (2022) · eScience · doi:10.1016/j.esci.2021.12.008 · Cited by 294
Metadata
- Authors
- Gao, H., Seymour, I. D., Xin, S., Xue, L., Henkelman, G., & Goodenough, J. B.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-12-02
- Volume
- 140
- Issue
- 51
- Pages
- 18192-18199
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2902735768
- Cited by
- 312
- References
- 47
- FWCI
- 9.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.