The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Short Fundamental Equations of State for 20 Industrial Fluids
Abstract
In a preceding project, functional forms for “short” Helmholtz energy equations of state for typical nonpolar and weakly polar fluids and for typical polar fluids were developed using simultaneous optimization. In this work, the coefficients of these short forms for the equations of state have been fitted for the fluids acetone, carbon monoxide, carbonyl sulfide, decane, hydrogen sulfide, 2-methylbutane (isopentane), 2,2-dimethylpropane (neopentane), 2-methylpentane (isohexane), krypton, nitrous oxide, nonane, sulfur dioxide, toluene, xenon, hexafluoroethane (R-116), 1,1-dichloro-1-fluoroethane (R-141b), 1-chloro-1,1-difluoroethane (R-142b), octafluoropropane (R-218), 1,1,1,3,3-pentafluoropropane (R-245fa), and fluoromethane (R-41). The 12 coefficients of the equations of state were fitted to substance specific data sets. The results show that simultaneously optimized functional forms can be applied to other fluids out of the same class of fluids for which they were optimized without significant loss of accuracy. The high numerical stability of the functional forms resulted in successful fits for fluids that previously could not be described by accurate empirical equations of state. For R-41, it is shown that the accuracies can be increased further by fitting the temperature exponents in addition to the coefficients of the equation of state, provided that highly accurate experimental data are available. Typical uncertainties of properties calculated using the new equations are 0.2 % in density, 1 % to 2 % in heat capacity and liquid-phase speed of sound, and 0.2 % in vapor pressure. Where data are available, uncertainties in vapor-phase sound speeds are generally less than 0.1 %.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wilhoit, R. C., Chao, J., & Hall, K. R. (1985) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555747 · Cited by 1,086
Benedict, M., Webb, G. B., & Rubin, L. C. (1940) · The Journal of Chemical Physics · doi:10.1063/1.1750658 · Cited by 701
Willingham, C. B., Taylor, W. J., Pignocco, J. M., & Rossini, F. D. (1945) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.035.009 · Cited by 359
The International Temperature Scale of 1990 (ITS-90)
Preston-Thomas, H. (1990) · Metrologia · doi:10.1088/0026-1394/27/2/010 · Cited by 292
Fluid thermodynamic properties for light petroleum systems
Starling, K. E. (1973) · Cited by 233
Multiparameter Equations of State
Span, R. (2000) · Springer eBooks · doi:10.1007/978-3-662-04092-8 · Cited by 204
Self-citationPhase Equilibria in HydrocarbonSystems
Reamer, H. H., Olds, R. H., Sage, B. H., & Lacey, W. N. (1942) · Industrial & Engineering Chemistry · doi:10.1021/ie50396a025 · Cited by 159
Thermodynamic Properties of n-Dodecane
Lemmon, E. W., & Huber, M. L. (2004) · Energy & Fuels · doi:10.1021/ef0341062 · Cited by 158
Self-citationPhase-Equilibrium Properties of System Carbon Dioxide-Hydrogen Sulfide
Bierlein, J. A., & Kay, W. B. (1953) · Industrial & Engineering Chemistry · doi:10.1021/ie50519a043 · Cited by 155
Ihmels, E. C., & Gmehling, J. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie001135g · Cited by 150
Specific Volumes of n-Alkanes.
Doolittle, A. K. (1964) · Journal of Chemical & Engineering Data · doi:10.1021/je60021a048 · Cited by 149
Carruth, G. F., & Kobayashi, R. (1973) · Journal of Chemical & Engineering Data · doi:10.1021/je60057a009 · Cited by 142
Preparation and Physical Properties of a Series of n-Alkanes
Doolittle, A. K., & Peterson, R. H. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01149a069 · Cited by 140
Huber, M. L., & Ely, J. F. (1994) · International Journal of Refrigeration · doi:10.1016/0140-7007(94)90083-3 · Cited by 119
Model for the radiolysis of water
Hamill, W. H. (1969) · The Journal of Physical Chemistry · doi:10.1021/j100725a027 · Cited by 116
Tables of thermal properties of gases
Kieffer, W. F. (1956) · Journal of Chemical Education · doi:10.1021/ed033pa477.1 · Cited by 110
Vapor-Liquid Critical Properties of Elements and Compounds. 3. Aromatic Hydrocarbons
Tsonopoulos, C., & Ambrose, D. (1995) · Journal of Chemical & Engineering Data · doi:10.1021/je00019a002 · Cited by 102
128. Physical properties and chemical constitution. Part XI. Ketones
Vogel, A. I. (1948) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9480000610 · Cited by 97
Sublimation and vaporization heats of long-chain alcohols
Davies, M., & Kybett, B. D. (1965) · Transactions of the Faraday Society · doi:10.1039/tf9656101608 · Cited by 93
Viscosity and density of mixtures of methane and n-decane from 298 to 393 K and up to 75 MPa
Audonnet, F., & Pádua, A. A. H. (2004) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2003.10.017 · Cited by 89
Atomic Weights of the Elements 1999
Coplen, T. B. (2001) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.1395055 · Cited by 89
Cullick, A. S., & Mathis, M. L. (1984) · Journal of Chemical & Engineering Data · doi:10.1021/je00038a008 · Cited by 77
Beaudoin, J. M., & Kohn, J. P. (1967) · Journal of Chemical & Engineering Data · doi:10.1021/je60033a007 · Cited by 70
Estrada‐Baltazar, A., León‐Rodríguez, A. D., Hall, K. R., et al. (2003) · Journal of Chemical & Engineering Data · doi:10.1021/je030102f · Cited by 68
THE DIELECTRIC POLARIZATION OF LIQUIDS. X. THE POLARIZATION AND REFRACTION OF THE NORMAL PARAFFINS
Dornte, R. W., & Smyth, C. P. (1930) · Journal of the American Chemical Society · doi:10.1021/ja01372a009 · Cited by 67
Ultrasonic speeds and thermodynamics for binary solutions of n-alkanes under high pressures
Takagi, T., & Teranishi, H. (1985) · Fluid Phase Equilibria · doi:10.1016/0378-3812(85)90050-0 · Cited by 62
GROSSE, A. V., Wackher, R. C., & Linn, C. B. (1940) · The Journal of Physical Chemistry · doi:10.1021/j150399a002 · Cited by 59
Thermodynamics of some simple sulfur-containing molecules
Evans, W. H., & Wagman, D. D. (1952) · Journal of research of the National Bureau of Standards · doi:10.6028/jres.049.015 · Cited by 55
Goates, J. R., Ott, J. B., & Grigg, R. B. (1981) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(81)90071-9 · Cited by 51
Viscosities and densities for propylene carbonate + toluene at 15, 20, 25, 30, and 35.degree.C
Moumouzias, G., & Ritzoulis, G. (1992) · Journal of Chemical & Engineering Data · doi:10.1021/je00008a024 · Cited by 50
Gas-liquid equilibrium in the hydrogen + n-decane system at elevated temperatures and pressures
Sebastian, H. M., Simnick, J. J., Lin, H.-M., & Chao, K. (1980) · Journal of Chemical & Engineering Data · doi:10.1021/je60084a021 · Cited by 50
Volumetric Behavior of Decane + Carbon Dioxide at High Pressures. Measurement and Calculation
Bessières, D., Saint-Guirons, H., & Daridon, J. (2001) · Journal of Chemical & Engineering Data · doi:10.1021/je010016k · Cited by 50
Pennington, R. E., & Kobe, K. A. (1954) · The Journal of Chemical Physics · doi:10.1063/1.1740413 · Cited by 49
Vapor pressures and triple point temperatures for several pure fluorocarbons
Crowder, G. A., Taylor, Z. L., Reed, T. M., & Young, J. A. (1967) · Journal of Chemical & Engineering Data · doi:10.1021/je60035a005 · Cited by 47
Vapour pressure of toluence from 273.15 to 298.15 K
Besley, L. M., & Bottomley, G. A. (1974) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(74)90045-7 · Cited by 39
The structure and properties of the alloy Cu2MnIn
Coles, B. R., Hume-Rothery, W., & Myers, H. P. (1949) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1949.0019 · Cited by 33
Model for Locally Compensated Cubic Sites of Tripositive Rare Earth Ions in Fluorite Crystals
O’Hare, J. M. (1972) · The Journal of Chemical Physics · doi:10.1063/1.1678853 · Cited by 33
Second Interaction Virial Coefficients of the Noble Gas-Hydrogen Mixtures Ar-H2, Kr-H2, and Xe-H2
Pérez, S., Schmiedel, H., & Schramm, B. (1980) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.1980.123.1.035 · Cited by 31
Thermodynamic Properties of Some Sulfur Compounds
Barrow, G. M., & Pitzer, K. S. (1949) · Industrial & Engineering Chemistry · doi:10.1021/ie50480a019 · Cited by 26
Phase Equilibria in Hydrocarbon Systems
Reamer, H. H., Sage, B. H., & Lacey, W. N. (1946) · Industrial & Engineering Chemistry · doi:10.1021/ie50442a009 · Cited by 24
Determination of activity coefficients by accurate measurement of boiling point diagram
Scott, L. S. (1986) · Fluid Phase Equilibria · doi:10.1016/0378-3812(86)90003-8 · Cited by 23
Aregbe, Y., Valkiers, S., Poths, J., Nørgaard, J., Kipphardt, H., Bièvre, P. D., & Taylor, P. (2001) · International Journal of Mass Spectrometry · doi:10.1016/s1387-3806(00)00397-3 · Cited by 19
The Vapor Pressure of Hexoafluoro and Pentafluorochloroacetone.
Murphy, K. P. (1964) · Journal of Chemical & Engineering Data · doi:10.1021/je60021a041 · Cited by 11
Gas-liquid equilibrium of hydrogen sulphide + carbon monoxide
Fredenslund, A., & Mollerup, J. M. (1975) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(75)90008-7 · Cited by 10
Equation of State Prediction of Thermodynamic Properties of Carbon Dioxide.
Martin, J. J. (1963) · Journal of Chemical & Engineering Data · doi:10.1021/je60018a011 · Cited by 6
Cited by
Kunz, O., & Wagner, W. (2012) · Journal of Chemical & Engineering Data · doi:10.1021/je300655b · Cited by 1,341
Development of an Experimental Database and Kinetic Models for Surrogate Diesel Fuels
Farrell, J. T., Cernansky, N. P., Dryer, F. L., Law, C. K., Friend, D. G., Hergart, C. A., McDavid, R. M., Patel, A. K., Mueller, C. J., & Pitsch, H. (2007) · SAE Technical Paper Series · doi:10.4271/2007-01-0201 · Cited by 486
The NIST REFPROP Database for Highly Accurate Properties of Industrially Important Fluids
Huber, M. L., Lemmon, E. W., Bell, I. H., & McLinden, M. O. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01427 · Cited by 398
Self-citationLemmon, E. W., McLinden, M. O., & Wagner, W. (2009) · Journal of Chemical & Engineering Data · doi:10.1021/je900217v · Cited by 378
Self-citationFröba, A. P., Kremer, H., & Leipertz, A. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp804319a · Cited by 334
Metadata
- Authors
- Lemmon, E. W., & Span, R.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-11
- Volume
- 51
- Issue
- 3
- Pages
- 785-850
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W2019859332
- Cited by
- 766
- References
- 45
- FWCI
- 12.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.