Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 486

The DOI matches its Crossref record; 84 of the 84 references it cites were found in a registry or an index.

Development of an Experimental Database and Kinetic Models for Surrogate Diesel Fuels

Farrell, J. T., Cernansky, N. P., Dryer, F. L., Law, C. K., Friend, D. G., Hergart, C. A., McDavid, R. M., Patel, A. K., Mueller, Charles J., Pitsch, H.·2007·SAE Technical Paper Series

Abstract

Computational fluid dynamic (CFD) simulations that include realistic combustion/emissions chemistry hold the promise of significantly shortening the development time for advanced high-efficiency, low-emission engines. However, significant challenges must be overcome to realize this potential. This paper discusses these challenges in the context of diesel combustion and outlines a technical program based on the use of surrogate fuels that sufficiently emulate the chemical complexity inherent in conventional diesel fuel. The essential components of such a program are discussed and include: (a) surrogate component selection; (b) the acquisition or estimation of requisite elementary chemical kinetic, thermochemical, and physical property data; (c) the development of accurate predictive chemical kinetic models, together with the measurement of the necessary fundamental laboratory data to validate these mechanisms; and (d) mechanism reduction tools to render the coupled chemistry/flow calculations feasible. In parallel to these efforts, the need exists to develop similarly robust models for fuel injection and spray processes involving multicomponent mixtures of wide distillation character, as well as methodologies to include all of these high fidelity submodels in computationally efficient CFD tools. Near- and longer-term research plans are proposed based on an application target of premixed diesel combustion. In the near term, the recommended surrogate components include n-decane, iso-octane, methylcyclohexane, and toluene. For the longer term, n-hexadecane, heptamethylnonane, n-decylbenzene, and 1-methylnaphthalene are proposed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.4271/2007-01-0201

Cites

84 of 84 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 84 references

Research works printed but not linked: 114

  1. Wallington, T.J. Kaiser, E.W. Farrell, J.T. “Automotive Fuels and Internal Combustion Engines: A Chemical Perspective,” Chem. Soc. Rev. 35 1 14 2006 · doi:10.1039/b410469m
  2. Sato, S. Sugimoto, Y. Sakanishi, K. Saito, I. Yui, S. “Diesel Quality and Molecular Structure of Bitumen-Derived Middle Distillates,” Fuel 83 1915 1927 2004 · doi:10.1016/j.fuel.2003.11.020
  3. NRC/DOE Oil Sands Chemistry and Engine Emissions Roadmap Workshop June 6-7 2005
  4. Hentschel, W. Schindler, K.-P. Haahtela, O. “European Diesel Research IDEA -- Experimental Results from DI Diesel Engine Investigations,” SAE Paper 941954 , SAE Trans. 103 1994 · doi:10.4271/941954
  5. Barths, H. Pitsch, H. Peters, N. “3D Simulation of DI Diesel Combustion and Pollutant Formation Using a Two-Component Reference Fuel,” Oil & Gas Sci. and Tech. 54 233 244 1999 · doi:10.2516/ogst:1999020
  6. Barths, H. Hasse, C. Peters, N. “Computational Fluid Dynamics Modelling of Non-Premixed Combustion in Direct Injection Diesel Engines,” Int. J. Engine Res. 1 249 267 2000 · doi:10.1243/1468087001545164
  7. Flanigan, C.T. Litzinger, T.A. Graves, R.L. “The Effect of Aromatics and Cycloparaffins on DI Diesel Emissions,” SAE Paper 892130 , SAE Trans. 98 1989 · doi:10.4271/892130
  8. Espey, C. Dec, J.E. “The Effect of TDC Temperature and Density on the Liquid-Phase Fuel Penetration in a D.I. Diesel Engine,” SAE Paper 952456 , SAE Trans. 104 1995 · doi:10.4271/952456
  9. Mueller, C.J. Martin, G.C. “Effects of Oxygenated Compounds on Combustion and Soot Evolution in a DI Diesel Engine: Broadband Natural Luminosity Imaging,” SAE Paper 2002-01-1631 , SAE Trans. 111 2002 · doi:10.4271/2002-01-1631
  10. Mathews, W.S. Coverdill, R.E. Lee, C. White, R.A. “Liquid and Vapor Fuel Distributions in a Small-Bore High-Speed Direct-Injection Diesel Engine,” SAE Paper 2002-01-2666 , SAE Trans. 111 2002 · doi:10.4271/2002-01-2666
  11. Montajir, R.M. Kawai, T. Naito, H. Suzuki, H. Ishii, H. Goto, Y. Odaka, M. “Visualization Experiment in a Transparent Engine with Pure and Mixed Normal Paraffin Fuels,” SAE Paper 2004-01-2018 2004 · doi:10.4271/2004-01-2018
  12. Verhoeven, D. Vanhemelryck, J.-L. Baritaud, T. “Macroscopic and Ignition Characteristics of High-Pressure Sprays of Single-Component Fuels,” SAE Paper 981069 , SAE Trans. 107 1998 · doi:10.4271/981069
  13. Higgins, B.S. Mueller, C.J. Siebers, D.L. “Measurements of Fuel Effects on Liquid-Phase Penetration in DI Sprays,” SAE Paper 1999-01-0519 , SAE Trans. 108 1999
  14. Siebers, D.L. “Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization,” SAE Paper 1999-01-0528 , SAE Trans. 108 1999 · doi:10.4271/1999-01-0528
  15. Suzuki, M. Nishida, K. Hiroyasu, H. “Simultaneous Concentration Measurement of Vapor and Liquid in an Evaporating Diesel Spray,” SAE Paper 930863 , SAE Trans. 102 1993 · doi:10.4271/930863
  16. Schmalzing, C.-O. Stapf, P. Maly, R.R. Renner, G. Stetter, H. Dwyer, H.A. “A Holistic Hydraulic and Spray Model -- Liquid and Vapor Phase Penetration of Fuel Sprays in DI Diesel Engines,” SAE Paper 1999-01-3549 , SAE Trans. 108 1999 · doi:10.4271/1999-01-3549
  17. Magnusson, A. Andersson, S. Jedrzejowski, S. “Spray-Wall Interaction: Diesel Fuels Impinging on a Tempered Wall,” SAE Paper 2006-01-1116 2006 · doi:10.4271/2006-01-1116
  18. Peskin, A. “The Effects of Different Property Models in a Computational Fluid Dynamics Simulation of a Reciprocating Compressor,” Int. J. Thermophys 20 175 1999 · doi:10.1023/a:1021442616990
  19. Huber, M.L. Laesecke, A. Xiang, H.W. “Viscosity Correlations for Minor Constituent Fluids in Natural Gas: n-octane, n-nonane, and n-decane,” Fluid Phase Equil. 224 263 270 2004 · doi:10.1016/j.fluid.2004.07.012
  20. Huber, M.L. Perkins, R.A. “Thermal Conductivity Correlations for Minor Constituent Fluids in Natural Gas: n-Octane, n-Nonane, and n-Decane,” Fluid Phase Equil. 227 47 55 2005 · doi:10.1016/j.fluid.2004.10.031
  21. Bruno, T.J. “Method and Apparatus for Precision In-Line Sampling of Distillate,” Separation Science and Technology 41 309 314 2006 · doi:10.1080/01496390500496918
  22. Lippert, A.M. Stanton, D.W. Reitz, R.D. Rutland, C.J. Hallett, W.L.H. “Investigating the Effect of Spray Targeting and Impingement on Diesel Engine Cold Start,” SAE Paper 2000-01-0269 2000 · doi:10.4271/2000-01-0269
  23. Law, C.K. “Internal Boiling and Superheating in Vaporizing Multicomponent Droplets,” AIChE Journal 24 4 626 632 1978 · doi:10.1002/aic.690240410
  24. Randolph, A.L. Makino, A. Law, C.K. “Liquid-Phase Diffusional Resistance in Multicomponent Droplet Gasification,” Proc. Combust. Inst. 21 601 608 1988 · doi:10.1016/s0082-0784(88)80290-x
  25. Law, C.K. Law, H.K. “A d 2 -Law for Multicomponent Droplet Vaporization and Combustion,” AIAA Journal 20 4 522 527 1982 · doi:10.2514/3.51103
  26. Makino, A. Law, C.K. “On the Controlling Parameter in the Gasification Behavior of Multicomponent Droplets,” Comb. Flame 73 331 336 1988 · doi:10.1016/0010-2180(88)90027-2
  27. Senda, J. Kawano, D. Hotta, I. Kawakami, K. Fujimoto, H. “Fuel Design Concept for Low Emission in Engine Systems,” SAE Paper 2000-01-1258 , SAE Trans. 109 2000 · doi:10.4271/2000-01-1258
  28. Kawano, D. Senda, J. Kawakami, K. Shimada, A. Fujimoto, H. “Fuel Design Concept for Low Emission In Engine Systems 3rd Report: Analysis of Spray Characteristics for Mixed Fuels,” SAE Paper 2002-01-0220 2002 · doi:10.4271/2002-01-0220
  29. Kawano, D. Senda, J. Wada, Y. Fujimoto, H. “Fuel Design Concept for Low Emission in Engine Systems 4th Report: Effect of Spray Characteristics of Mixed Fuel on Exhaust Concentrations in Diesel Engine,” SAE Paper 2003-01-1038 , SAE Trans. 112 2003 · doi:10.4271/2003-01-1038
  30. Montajir, R.M. Kawai, T. Naito, H. Suzuki, H. Ishii, H. Goto, Y. Odaka, M. “Visualization Experiment in a Transparent Engine with Pure and Mixed Normal Paraffin Fuels,” SAE Paper 2004-01-2018 2004 · doi:10.4271/2004-01-2018
  31. Kadota, T. Yamasaki, H. “Recent Advances in the Combustion of Water Fuel Emulsion,” Prog. Energy Combust. Sci. 28 385 404 2002 · doi:10.1016/s0360-1285(02)00005-9
  32. Pitz, W.J. Cernansky, N.P. Dryer, F.L. Egolfopoulos, F. Farrell, J.T. Friend, D.G. Pitsch, H. “Development of an Experimental Database and Kinetic Models for Surrogate Gasoline Fuels,” SAE Paper 2007-01-0175 2007 · doi:10.4271/2007-01-0175
  33. Zeppieri, S.K. Klotz, S.D. Dryer, F.L. “Modeling Concepts for Larger Carbon Number Alkanes: A Partially Reduced Skeletal Mechanism for n-Decane Oxidation and Pyrolysis,” Proc. Comb. Inst. 28 1587 1596 2000 · doi:10.1016/s0082-0784(00)80556-1
  34. Delfau, J. L. Bouhria, M. Reuillon, M. Sanogo, O. Akrich, R. Vovelle, C. “Experimental and Computational Investigation of the Structure of a Sooting Decane-O2-Ar Flame,” Proc. Comb. Inst. 23 1567 1990 · doi:10.1016/s0082-0784(06)80427-3
  35. Ristori, A. Dagaut P. Cathonnet M. “The Oxidation of n-Hexadecane: Experimental and Detailed Kinetic Modeling,” Comb. Flame 125 1128 1137 2001 · doi:10.1016/s0010-2180(01)00232-2
  36. McEnally, C.S. Pfefferle, L.D. “Fuel Decomposition and Hydrocarbon Growth Processes For Substituted Cyclohexanes and For Alkenes in Nonpremixed Flames,” Proc. Comb. Inst. 30 1425 1432 2005 · doi:10.1016/j.proci.2004.08.048
  37. Nakakita, K. Akihama, K. Weissman, W. Farrell, J.T. “Effect of Hydrocarbon Molecular Structure in Diesel Fuel on In-Cylinder Soot Formation and Exhaust Emissions,” Int. J. Engine Res. 6 3 187 205 2005 · doi:10.1243/146808705x7400
  38. Eng, R.A. Fittschen, C. Gebert, A. Hibomvschi, P. Hippler, H. Unterreiner, A.-N. “Kinetic Investigations of the Reactions of Toluene and of p-Xylene with Molecular Oxygen between 1050 and 1400 K,” Proc. Comb. Inst. 27 211 1998 · doi:10.1016/s0082-0784(98)80407-4
  39. Glassman, I. Combustion, Academic Press San Diego, CA 1996
  40. Farrell, J.T. Johnston, R.J. “Laminar Burning Velocities and Markstein Lengths of Aromatics at Elevated Temperature and Pressure,” Proc. Comb. Inst. 30 217 224 2004 · doi:10.1016/j.proci.2004.08.075
  41. Roubaud, A. Lemaire, O. Minetti, R. Sochet, L.R. “High Pressure Auto-Ignition and Oxidation Mechanism of o-Xylene, o-Ethyltoluene, and n-Butylbenzene Between 600 and 900 K,” Comb. Flame 123 561 571 2000 · doi:10.1016/s0010-2180(00)00174-7
  42. Zhao, Z. Chaos, M. Kazakov, A. Gokulakrishnan, P. Angioletti, M. Dryer, F.L. “Fuel Chemistry Models for Simulating Gasoline Kinetics in Internal Combustion Engine Applications,” Work in Progress Poster No. 2C-27, 31st International Symposium on Combustion University of Heidelberg Germany 2006
  43. Higgins, B.S. Siebers, D. Mueller, C. Aradi, A. “Effects of an Ignition-enhancing, Diesel-fuel Additive on Diesel-spray Evaporation, Mixing, Ignition, and Combustion,” Proc. Comb. Inst. 27 1873 1998 · doi:10.1016/s0082-0784(98)80030-1
  44. Stein, Y. Yetter, R.A. Dryer, F.L. Aradi, A. “The Autoignition Behavior of Surrogate Diesel Fuel Mixtures and the Chemical Effects of 2-Ethylhexyl Nitrate (2-EHN) Cetane Improver,” SAE Paper 1999-01-1504 , SAE Trans. 108 1999 · doi:10.4271/1999-01-1504
  45. Pfahl, U. Adomeit, G. “Self-Ignition of Diesel-Engine Model Fuels at High Pressures,” SAE Paper 970897 , SAE Trans. 106 1997 · doi:10.4271/970897
  46. Simmie, J.M. “Detailed Chemical Kinetic Models for the Combustion of Hydrocarbon Fuels,” Prog. Energy Comb. Sci 29 599 634 2003 · doi:10.1016/s0360-1285(03)00060-1
  47. Patel, A. Kong, S. C. Reitz, R. D. “Development and Validation of a Reduced Reaction Mechanism for HCCI Engine Simulations,” SAE Paper 2004-01-0558 2004 · doi:10.4271/2004-01-0558
  48. Glaude, P.A. Conraud V. Fournet R. Battin-Leclerc F. Côme G.M. Scacchi G. Dagaut P. Cathonnet M. “Modeling the Oxidation of Mixtures of Primary Reference Automobile Fuels,” Energy & Fuels 16 1186 1195 2002 · doi:10.1021/ef020025e
  49. Zeppieri, S.K. Klotz, S.D. Dryer, F.L. “Modeling Concepts for Larger Carbon Number Alkanes: A Partially Reduced Skeletal Mechanism for n-Decane Oxidation and Pyrolysis,” Proc. Comb. Inst. 28 1587 1596 2000 · doi:10.1016/s0082-0784(00)80556-1
  50. Bikas Peters “Kinetic Modelling of n-Decane Combustion and Autoignition” Comb. Flame 126 1456 1475 2001 · doi:10.1016/s0010-2180(01)00254-1
  51. Buda, F. Bounaceur R. Warth V. Glaude P.A. Fournet R. Battin-Leclerc F. “Progress Toward a Unified Detailed Kinetic Model for the Autoignition of Alkanes from C 4 to C 10 between 600 and 1200 K,” Comb. Flame 142 170 186 2005 · doi:10.1016/j.combustflame.2005.03.005
  52. Fournet, R. Battin-Leclerc, F. Glaude, P.A. Judenherc, B. Warth, V. Côme, G.M. Scacchi, G. Ristori, A. Pengloan, G. Dagaut, P. Cathonnet., M. “The Gas Phase Oxidation of n-Hexadecane,” Int. J. Chem. Kin. 33 574 86 2001 · doi:10.1002/kin.1053
  53. Chaos, M. Kazakov, A. Zhao, Z. Dryer, F.L. “Model Development and Reduction Methods for High-temperature Large Alkane Molecule Kinetics” Work in Progress Poster No. 2E-15, 31st International Symposium on Combustion University of Heidelberg Germany 2006
  54. Dagaut, P. Reuillon, M. Cathonnet, M. “High Pressure Oxidation of Liquid Fuels from Low to High Temperature. 1. n-Heptane and iso-Octane,” Combust. Sci. Technol. 95 233 260 1994 · doi:10.1080/00102209408935336
  55. Curran, H. J. Gaffuri, P. Pitz, W. J. Westbrook, C. K. “A Comprehensive Modeling Study of iso-Octane Oxidation,” Comb. Flame 129 253 280 2002 · DOI
  56. Orme, J.P. Curran H.J. Simmie J.M. “Experimental and Modeling Study of Methyl Cyclohexane Pyrolysis And Oxidation,” J. Phys. Chem. A 110 114 131 2006 · doi:10.1021/jp0543678
  57. Zhao, Z. Chaos, M. Kazakov, A. Gokulakrishnan, P. Angioletti, M. Dryer, F.L. Proc. Comb. Inst. 31 2006
  58. Gauthier, B.M. Davidson D.F. Hanson R.K. “Shock Tube Determination of Ignition Delay Times in Full-Blend and Surrogate Fuel Mixtures,” Combust. Flame 139 300 311 2004 · doi:10.1016/j.combustflame.2004.08.015
  59. Sivaramakrishnan, B. Tranter R.S. Brezinsky K. “A High Pressure Model for the Oxidation of Toluene,” Proc. Comb. Inst. 30 1165 1173 2005 · doi:10.1016/j.proci.2004.08.128
  60. Vasudevan, V. Davidson D.F. Hanson R.K. “Shock Tube Measurements of Toluene Ignition Times and OH Concentration Time Histories,” Proc. Comb. Inst. 30 1155 1163 2005 · doi:10.1016/j.proci.2004.07.039
  61. Hiroyasu, H. Kadota, T. “Models for Combustion and Formation of Nitric Oxide and Soot in DI Diesel Engines” SAE Paper 760129 1976 · doi:10.4271/760129
  62. Nagle, J. Strickland-Constable, R.F. “Oxidation of Carbon Between 1000-2000°C” Proceedings of the Fifth Carbon Conference 265 325 1965
  63. Tao, F. Liu, Y. RempelEwert, B.A. Foster, D.E. Reitz, R.D. Choi, D. Miles, P.C. “Modeling the Effects of EGR and Retarded-Injection on Soot Formation in a High-Speed Direct-Injection (HSDI) Diesel Engine using a Multi-Step Phenomenological Soot Model,” SAE Paper 2005-01-0121 2005 · doi:10.4271/2005-01-0121
  64. Frenklach, M. Wang, H. Rabinowitz, M.J. “Optimization and Analysis of Large Chemical Kinetic Mechanisms Using the Solution Mapping Method - Combustion of Methane,” Prog. Energy Combust. Sci. 18 47 1992 · doi:10.1016/0360-1285(92)90032-v
  65. Zhao, Z. Conley J.P. Kazakov, A. Dryer, F.L. “Burning Velocities of Real Gasoline Fuel at 353 K and 500 K” SAE Paper 2003-01-3265 2003 · doi:10.4271/2003-01-3265
  66. Ohashi, T. Yang, X. Takabayashi, T. Urata, Y. Kubota, S. Katsuyama, H. “Ignition And Combustion Simulation In HCCI Engines,” SAE Paper 2006-01-1522 2006 · doi:10.4271/2006-01-1522
  67. Lu, T.F. Law, C.K. “Linear-Time Reduction of Large Kinetic Mechanisms with Directed Relation Graph: n-Heptane and iso-Octane,” Combust. Flame 144 24 36 2006 · doi:10.1016/j.combustflame.2005.02.015
  68. Lovas, T. Amneus, P. Mauss, F. Mastorakos, E. Comparison of Automatic Reduction Procedures for Ignition Chemistry Proc. Comb. Inst. 29 1387 1393 2002 · doi:10.1016/s1540-7489(02)80170-5
  69. Lu, T.F. Ju, Y. Law, C.K. “Complex CSP for Chemistry Reduction and Analysis,” Combust. Flame 126 1445 1455 2001 · doi:10.1016/s0010-2180(01)00252-8
  70. Valorini, M. Creta, F. Donato, F. Najim, H.N. Goussis, D.A. “A CSP-based Skeletal Mechanism Generation Procedure: Autoginition and Premixed Laminar Flames in n-Heptane/Air Mixtures,” European Conference on Computational Fluid Dynamics Wessling P. Onate E. Periaux J. TU Delft Netherlands 2006
  71. Kazakov, A. Chaos, M. Zhao, Z. Dryer, F.L. “Computational Singular Perturbation Analysis of Two-Stage Ignition of Large Hydrocarbons” J. Phys. Chem. A 110 7003 7009 2006 · doi:10.1021/jp057224u
  72. Pitsch, H. Peters, N. “Investigation of the Ignition Process of Sprays Under Diesel Engine Conditions Using Reduced n-Heptane Chemistry,” SAE Paper, 982464 1998 · doi:10.4271/982464
  73. Liu, S. Hewson, J. C. Chen, J. H. Pitsch, H. “Effects on Strain Rate on High-Pressure Nonpremixed N-Heptane Autoignition in Counterflow,” Comb. Flame 137 320 339 2004 · doi:10.1016/j.combustflame.2004.01.011
  74. Pitsch, H. Wan, Y. P. Peters, N. Numerical Investigation of Soot Formation and Oxidation Under Diesel Engine Conditions SAE Paper, 952357 1995 · doi:10.4271/952357
  75. Chevalier, C. Louessard, P. Müller, U.C. Warnatz, J. “A Detailed Low-temperature Reaction Mechanism of n-Heptane Auto-ignition,” International Symposium on Diagnostics and Modeling of Combustion in Internal Engines COMODIA 90 The Japan Society of Mechanical Engineers Kyoto 1990
  76. Pitsch, H. Barths, H. Peters, N. Three-Dimensional Modeling of NO x and Soot Formation in DI-Diesel Engines using Detailed Chemistry based on the Interactive Flamelet Approach SAE Paper 962057 1996 · doi:10.4271/962057
  77. Aceves, S.M. Flowers, D.L. Martinez-Frias, J. Smith, J.R. Westbrook, C. K. Pitz, W.J. Dibble, R. Wright, J.F. Akinyemi, W.C. Hessel, R.P. “A Sequential Fluid-Mechanic Chemical-Kinetic Model of Propane HCCI Combustion” SAE Paper 2001-01-1027 2001 · doi:10.4271/2001-01-1027
  78. Aceves, S.M. Martinez-Frias, J. Flowers, D.L. Smith, J.R. Dibble, R. Wright, J.F. Hessel, R.P. “A Decoupled Model of Detailed Fluid Mechanics Followed by Detailed Chemical Kinetics for Prediction of Iso-Octane HCCI Combustion” SAE Paper 2001-01-3612 2001 · doi:10.4271/2001-01-3612
  79. Aceves, S.M. Flowers, D.L. Espinosa-Loza, F. Babajimopoulos, A. Assanis, D.N. “Analysis of Premixed Charge Compression Ignition Combustion With a Sequential Fluid Mechanics-Multizone Chemical Kinetics Model” SAE Paper 2005-01-0115 2005 · doi:10.4271/2005-01-0115
  80. Hergart, C.-A. Barths, H. Siewert, R.M. “Modeling Approaches for Premixed Charge Compression Ignition Combustion” SAE Paper 2005-01-0218 2005 · doi:10.4271/2005-01-0218
  81. Flowers, D. Aceves, S. Martinez-Frias, J. Hessel, R. Dibble, R. “Effect of Mixing on Hydrocarbon and Carbon Monoxide Emissions Prediction for Isooctane HCCI Engine Combustion Using a Multi-zone Detailed Kinetics Solver” SAE Paper 2003-01-1821 2003 · doi:10.4271/2003-01-1821
  82. Flowers, D.L. Aceves, S.M. Babajimopoulos, A. “Effect of Charge Non-uniformity on Heat Release and Emissions in PCCI Engine Combustion,” SAE Paper 2006-01-1363 · doi:10.4271/2006-01-1363
  83. Kong, S.C. Reitz, R.D. “Application of Detailed Chemistry and CFD for Predicting Direct Injection HCCI Engine Combustion and Emissions,” Proc. Comb. Inst. 29 667 9 2002 · doi:10.1016/s1540-7489(02)80085-2
  84. Babajimopoulos, A. Lavoie, G.A. Assanis, D.N. “Modelling HCCI Combustion with High Levels of Residual Gas Fraction - A Comparison of two VVA Strategies” SAE Paper 2003-01-3220 2003 · doi:10.4271/2003-01-3220
  85. Singh, S. Reitz, R.D. Musculus, M.P.B. “Comparison of the Characteristic Time (CTC), Representative Interactive Flamelet (RIF), and Direct Integration with Detailed Chemistry Combustion Models against Optical Diagnostic Data for Multi-Mode Combustion in a Heavy-Duty DI Diesel Engine,” SAE Paper 2006-01-0055 2006 · doi:10.4271/2006-01-0055
  86. Zhang, Y.Z. Kung, E.H. Haworth, D.C. “A PDF method for Multidimensional Modeling of HCCI Engine Combustion: Effects of Turbulence/Chemistry Interactions on Ignition Timing and Emissions,” Proc. Comb. Inst. 2005 30 2 2763 2771 2005 · doi:10.1016/j.proci.2004.08.236
  87. Steiner, R. Bauer, C. Otto, F.S. Maas, U. “3D-Simulation of DI-Diesel Combustion Applying a Progress Variable Approach Accounting for Complex Chemistry,” SAE Paper 2004-01-0106 2004 · doi:10.4271/2004-01-0106
  88. Cook, D.J. Pitsch, H. “Enthalpy-Based Flamelet Model for HCCI Applied to a Rapid Compression Machine” SAE Paper 2005-01-3735 2005 · doi:10.4271/2005-01-3735
  89. Huang, Z. Shiga, S. Ueda, T. Nakamura, H. Ishima, T. Obakata, T. Tsue, M. Kono, M. “Effect of Fuel Injection Timing on the Natural Gas Direct-Injection Combustion,” J. Engineering for Gas Turbines and Power 125 783 790 2003 · doi:10.1115/1.1563243
  90. Koert, D.N. Miller D.L. Cernansky N.P. “Results of Reactivity Mapping Studies Through the Negative Temperature Coefficient Region for Propane at Pressures From 5 to 15 atm,” Energy & Fuels 6 485 493 1992 · doi:10.1021/ef00034a020
  91. Thomson, K.A. Gulder O.L. Weckman E.J. Fraser R.A. Smallwood G.J. Snelling D.R. “Soot Concentration and Temperature Measurements in Co-Annular, Nonpremixed CH 4 /Air Laminar Flames at Pressures up to 4 MPa,” Comb. Flame 140 222 232 2005 · doi:10.1016/j.combustflame.2004.11.012
  92. Liu, F. Thomson K.A. Guo H. Smallwood G.J. “Numerical and Experimental Study of an Axisymmetric Coflow Laminar Methane-Air Diffusion Flame at Pressures Between 5 and 40 Atmospheres,” Comb. Flame 146 456 471 2006 · doi:10.1016/j.combustflame.2006.04.018
  93. Starke, R. Roth P. “Soot Particle Sizing by LII During Shock Tube Pyrolysis of C 6 H 6 ,” Comb. Flame 127 2278 2285 2001 · doi:10.1016/s0010-2180(01)00329-7
  94. Blin-Simiand, N, Jorand, F. Sahetchian, K. Brun, M. Kerhoas, L. Malosse, C. Einhorn, J. “Hydroperoxides with Zero, One, Two or More Carbonyl Groups Formed During the Oxidation of n-Dodecane,” Combust. Flame 126 1-2 1524 1532 2001 · doi:10.1016/s0010-2180(01)00264-4
  95. Chaos, M. Zhao, Z. Kazakov, A. Dryer, F.L. Zeppieri, S.P. “High Temperature Compact Mechanism Development for Large Alkanes: n-Hexadecane,” 6th International Conference on Chemical Kinetics Holiday Inn, Gaithersburg, MD 2005
  96. He, X. Donovan, M.T. Zigler, B.T. Palmer, T.R. Walton, S.M. Wooldridge, M.S. Atreya, A. “An Experimental and Modeling Study of iso-Octane Ignition Delay Times Under Homogeneous Charge Compression Ignition Conditions,” Combust. Flame 142 3 266 275 2005 · doi:10.1016/j.combustflame.2005.02.014
  97. Ciajolo, A. D'Anna, A. “Controlling Steps in the Low-Temperature Oxidation of n-Heptane and iso-Octane,” Combust. Flame 112 4 617 622 1998 · doi:10.1016/s0010-2180(97)00167-3
  98. Lu, X.-C. Chen, W. Huang, Z. “A Fundamental Study on the Control of the HCCI Combustion and Emissions by Fuel Design Concept Combined with Controllable EGR. Part 2. Effect of Operating Conditions and EGR on HCCI Combustion,” Fuel 84 9 1084 1092 2005 · doi:10.1016/j.fuel.2004.12.015
  99. Vanhove, G. Minetti, R. Touchard, S. Fournet, R. Glaude, P.A. Battin-Leclerc, F. “Experimental and Modeling Study of the Autoignition of 1-Hexene/Isooctane Mixtures at Low Temperatures,” Combust. Flame 145 1-2 272 281 2006 · doi:10.1016/j.combustflame.2005.10.007
  100. Mittal, G. Sung, C.J. “Aerodynamics Inside a Rapid Compression Machine,” Combust. Flame 145 1-2 160 180 2006 · doi:10.1016/j.combustflame.2005.10.019
  101. Pitz, W.J. Naik, C.V. Mhaoldúin, T.N. Westbrook, C.K. Curran, H.J. Orme, J.P. Simmie, J.M. “Modeling and Experimental Investigation of Methylcyclohexane Ignition in a Rapid Compression Machine,” Proc. Combust. Inst. 31 2007 · doi:10.1016/j.proci.2006.08.041
  102. Vanhove, G. Petit, G. Minetti, R. “Experimental Study of the Kinetic Interactions in the Low-Temperature Autoignition of Hydrocarbon Binary Mixtures and a Surrogate Fuel,” Combust. Flame 145 3 521 532 2006 · doi:10.1016/j.combustflame.2006.01.001
  103. Andrae, J. Johansson, D. Bjornbom, P. Risberg, P. Kalghatgi, G. “Co-oxidation in the Auto-Ignition of Primary Reference Fuels and n-Heptane/Toluene Blends,” Combust. Flame 140 4 267 286 2005 · doi:10.1016/j.combustflame.2004.11.009
  104. Scott, M. Walker, R.W. “Addition of Toluene and Ethylbenzene to Mixtures of H 2 and O 2 at 773 K: Part I: Kinetic Measurements for H and HO 2 Reactions with the Additives and a Data Base for H Abstraction by HO 2 from Alkanes, Aromatics and Related Compounds,” Combust. Flame 129 4 365 377 2002 · doi:10.1016/s0010-2180(02)00350-4
  105. Ellis, C. Scott, M.S. Walker, R.W. “Addition of Toluene and Ethylbenzene to Mixtures of H 2 and O 2 at 772 K: Part 2: Formation of Products and Determination of Kinetic Data for H+ Additive and for Other Elementary Reactions Involved,” Combust. Flame 132 3 291 304 2003 · doi:10.1016/s0010-2180(02)00439-x
  106. Tanaka, S. Ayala, F. Keck, J.C. Heywood, J.B. “Two-Stage Ignition in HCCI Combustion and HCCI Control by Fuels and Additives,” Combust. Flame 132 1-2 219 239 2003 · doi:10.1016/s0010-2180(02)00457-1
  107. Curran, H.J. Gaffuri, P. Pitz, W.J. Westbrook, C.K. “A Comprehensive Modeling Study of n-Heptane Oxidation,” Combust. Flame 114 1-2 149 177 1998 · DOI
  108. Ranzi, E. Gaffuri, P. Faravelli, T. Dagaut, P. “A Wide-Range Modeling Study of n-Heptane Oxidation,” Combust. Flame 103 1-2 91 106 1995 · doi:10.1016/0010-2180(95)00091-j
  109. Held, T.J. Marchese, A.J. Dryer, F.L. “A Semiempirical Reaction Mechanism for n-Heptane Oxidation and Pyrolysis,” Combust. Sci. Technol. 123 1-6 107 146 1997 · doi:10.1080/00102209708935624
  110. Herzler, J. Jerig, L. Roth, P. “Shock Tube Study of the Ignition of Lean n-Heptane/Air Mixtures at Intermediate Temperatures and High Pressures,” Proc. Combust. Inst. 30 1 1147 1153 2005 · doi:10.1016/j.proci.2004.07.008
  111. Berta, P. Aggarwal, S.K. Puri, I.K. “An Experimental and Numerical Investigation of n-Heptane/air Counterflow Partially Premixed Flames and Emission of NOx and PAH Species,” Combust. Flame 145 4 740 764 2006 · doi:10.1016/j.combustflame.2006.02.003
  112. Silke, E.J. Curran, H.J. Simmie, J.M. “The Influence of Fuel Structure on Combustion as Demonstrated by the Isomers of Heptane: a Rapid Compression Machine Study,” Proc. Combust. Inst. 30 2 2639 2647 2005 · doi:10.1016/j.proci.2004.08.180
  113. Dagaut, P. Reuillon, M. Cathonnet, M. “Experimental-Study of the Oxidation of n-Heptane in a Jet-Stirred Reactor from Low-Temperature to High-Temperature and Pressures up to 40-Atm,” Combust. Flame 101 1-2 132 140 1995 · doi:10.1016/0010-2180(94)00184-t
  114. Minetti, R. Carlier, M. Ribaucour, M. Therssen, E. Sochet, L.R. “A Rapid Compression Machine Investigation of Oxidation and Auto-Ignition of n-Heptane: Measurements and Modeling,” Combust. Flame 102 3 298 309 1995 · doi:10.1016/0010-2180(94)00236-l

Cited by

See all 486

Metadata

Authors
Farrell, J. T., Cernansky, N. P., Dryer, F. L., Law, C. K., Friend, D. G., Hergart, C. A., McDavid, R. M., Patel, A. K., Mueller, C. J., & Pitsch, H.
Venue
SAE Technical Paper Series
Published
2007-04-16
Volume
1
ISSN
  • 0148-7191 (ISSN-L)
  • 2688-3627
OpenAlex
W1975850540
Cited by
486
References
84
FWCI
29.31
Type
conference paper
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Development of an Experimental Database and Kinetic Models for Surrogate Diesel Fuels. https://app.cochat.ai/papers/10.4271/2007-01-0201
The paper
Farrell, J. T., Cernansky, N. P., Dryer, F. L., Law, C. K., Friend, D. G., Hergart, C. A., McDavid, R. M., Patel, A. K., Mueller, C. J., & Pitsch, H. (2007). Development of an Experimental Database and Kinetic Models for Surrogate Diesel Fuels. SAE Technical Paper Series. https://doi.org/10.4271/2007-01-0201

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.