Experimental and Modeling Study of Methane Adsorption on Activated Carbon Derived from Anthracite
The DOI matches its Crossref record.
Abstract
Low-cost anthracite was used as the raw material for preparing microporosity controlled activated carbons by KOH activation. The adsorption characteristics of methane onto activated carbon were measured at 298 K and pressures up to 3.5 MPa by a volumetric method. The experimental data were fitted to the Dubinin–Astakhov model, and relative deviations of better than 0.1 % were obtained. Three main factors were suggested, accounting for the higher methane uptake. It was revealed that better methane uptake is dependent on larger micropore volume and specific surface area. When the micropore volume and surface area of two samples are similar, the activated carbon possessing a narrower micropore size distribution performed higher methane uptake. The relationship between the surface coverage ( C / C 0 ) and the isosteric heat of adsorption confirmed that the heterogeneities of the as-obtained samples was a main factor influencing the methane adsorption at a surface coverage lower than 0.7. The activated carbon possessing higher heterogeneity deserved better methane uptake. The kinetics of methane adsorption on five activated carbons obeyed the pseudosecond-order equation very well under current experimental conditions (298 K, 0.28 MPa). The activated carbon displayed a faster adsorption rate and possessed a better adsorption capacity of methane.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Adsorption isotherm models: A comprehensive and systematic review (2010−2020)
Mozaffari Majd, M., Kordzadeh-Kermani, V., Ghalandari, V., Askari, A., & Sillanpää, M. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151334 · Cited by 728
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Assessment of porous carbons derived from sustainable palm solid waste for carbon dioxide capture
Nasri, N. S., Hamza, U. D., Ismail, S. N., Ahmed, M. M., & Mohsin, R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.053 · Cited by 157
A Review of Porous Adsorbents for the Separation of Nitrogen from Natural Gas
Nandanwar, S. U., Corbin, D. R., & Shiflett, M. B. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02730 · Cited by 96
Metadata
- Authors
- Luo, J., Liu, Y., Jiang, C., Chu, W., Jie, W., & Xie, H.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-11-09
- Volume
- 56
- Issue
- 12
- Pages
- 4919-4926
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W2334301045
- Cited by
- 81
- References
- 0
- FWCI
- 2.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.