The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
The Effect of Calcination Temperature on the Surface Microstructure and Photocatalytic Activity of TiO2 Thin Films Prepared by Liquid Phase Deposition
Abstract
TiO 2 thin films were prepared on fused quartz by the liquid-phase deposition (LPD) method from a (NH 4 ) 2 TiF 6 aqueous solution upon addition of boric acid (H 3 BO 3 ) and calcined at various temperatures. The as-prepared films were characterized with thermogravimetry (TG), Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD), UV−Visible spectrophotometry (UV−Vis), scanning electron microscopy (SEM), photoluminescence spectra (PL), and X-ray photoelectron spectroscopy (XPS), respectively. The photocatalytic activity of the samples was evaluated by photocatalytic decolorization of methyl orange aqueous solution. It was found that the as-prepared TiO 2 thin films contained not only Ti and O elements, but also a small amount of F, N, and Si elements. The F and N came from the precursor solution, and the amount of F decreased with increasing calcination temperature. Two sources of Si were identified. One was from the SiF 6 2- ions, which were formed by a reaction between the treatment solution and quartz substrate. The other was attributed to the diffusion of Si from the surface of quartz substrate into TiO 2 thin film at 700 °C or higher calcination temperatures. With increasing calcination temperature, the photocatalytic activity of the TiO 2 thin films gradually increased due to the improvement of crystallization of the anatase TiO 2 thin films. At 700 °C, the TiO 2 thin film showed the highest photocatalytic activity due to the increasing amount of SiO 2 as an adsorbent center and better crystallization of TiO 2 in the composite thin film. Moreover, the SiO 2 /TiO 2 composite thin film showed the lowest PL intensity due to a decrease in the recombination rate of photogenerated electrons and holes under UV light irradiation, which further confirms the film with the highest photocatalytic activity at 700 °C. When the calcination temperature is higher than 700 °C, the decrease in photocatalytic activity is due to the formation of rutile and the sintering and growth of TiO 2 crystallites resulting in the decrease of surface area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Photolysis of Water at a Semiconductor Electrode
FUJISHIMA, A., & HONDA, K. (1972) · Nature · doi:10.1038/238037a0 · Cited by 34,169
Environmental applications of semiconductor photocatalysis
Hoffmann, M. R., Martin, S. T., Choi, W., & Bahnemann, D. W. (1995) · Chemical Reviews · doi:10.1021/cr00033a004 · Cited by 18,495
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
Yu, J. C., Yu, Ho, Jiang, & Zhang (2002) · Chemistry of Materials · doi:10.1021/cm020027c · Cited by 2,166
Self-citationSerpone, N., Lawless, D., & Khairutdinov, R. F. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100045a026 · Cited by 1,439
Hydrothermal Preparation of Uniform Nanosize Rutile and Anatase Particles
Cheng, H., Ma, J., Zhao, Z., & Qi, L. (1995) · Chemistry of Materials · doi:10.1021/cm00052a010 · Cited by 794
Photocatalytic activity of WOx-TiO2 under visible light irradiation
Li, X. Z., Li, F. B., Yang, C. L., & Ge, W. K. (2001) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(01)00446-4 · Cited by 708
Li, X. Z., & Li, F. B. (2001) · Environmental Science & Technology · doi:10.1021/es001752w · Cited by 682
Enhanced Photocatalytic Performance of Titania-Based Binary Metal Oxides: TiO2/SiO2 and TiO2/ZrO2
Fu, X., Clark, L. A., Yang, Q., & Anderson, M. A. (1996) · Environmental Science & Technology · doi:10.1021/es950391v · Cited by 655
The enhancement of photodegradation efficiency using Pt–TiO2 catalyst
Li, F. B., & Li, X. Z. (2002) · Chemosphere · doi:10.1016/s0045-6535(02)00201-1 · Cited by 589
Cited by
Kumar, S. G., & Devi, L. G. (2011) · The Journal of Physical Chemistry A · doi:10.1021/jp204364a · Cited by 1,968
Liqiang, J., Yichun, Q., Baiqi, W., Shudan, L., Baojiang, J., Libin, Y., Wei, F., Honggang, F., & Jiazhong, S. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.11.007 · Cited by 1,942
Yu, J., Wang, S., Low, J., & Xiao, W. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp53131g · Cited by 1,428
Self-citationTiO2 photocatalyst for water treatment applications
Lee, S.-Y., & Park, S.-J. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.07.012 · Cited by 992
Hydrothermal Synthesis and Photocatalytic Activity of Zinc Oxide Hollow Spheres
Yu, J., & Yu, X. (2008) · Environmental Science & Technology · doi:10.1021/es800036n · Cited by 807
Self-citationYu, J., Xiong, J., Cheng, B., & Liu, S. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2005.03.009 · Cited by 711
Self-citationYan, J., Wu, G., Guan, N., Li, L., Li, Z., & Cao, X. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50927c · Cited by 684
Yu, J. G., Su, Y. R., & Cheng, B. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600933 · Cited by 661
Self-citationDevi, L. G., & Kavitha, R. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.04.035 · Cited by 637
Hossain, M. K., Toki, G. F. I., Kuddus, A., Rubel, M. H. K., Hossain, M. M., Bencherif, H., Rahman, M. F., Islam, M. R., & Mushtaq, M. (2023) · Scientific Reports · doi:10.1038/s41598-023-28506-2 · Cited by 629
Yu, J., Wang, W., Cheng, B., & Su, B.-L. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp900136q · Cited by 611
Self-citationYu, J., Wang, G., Cheng, B., & Zhou, M. (2007) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.06.022 · Cited by 593
Self-citationJiang, G., Lin, Z., Chen, C., Zhu, L., Chang, Q., Wang, N., Wei, W., & Tang, H. (2011) · Carbon · doi:10.1016/j.carbon.2011.02.059 · Cited by 582
Cheng, H., Huang, B., Dai, Y., Qin, X., & Zhang, X. (2010) · Langmuir · doi:10.1021/la903943s · Cited by 575
Photocatalysis fundamentals and surface modification of TiO2 nanomaterials
Wen, J., Li, X., Liu, W., Fang, Y., Xie, J., & Xu, Y. (2015) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(15)60999-8 · Cited by 552
Dai, G., Yu, J., & Liu, G. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp200788n · Cited by 524
Self-citationCarbon as catalyst and support for electrochemical energy conversion
Trogadas, P., Fuller, T. F., & Strasser, P. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.005 · Cited by 522
Yu, J., Ma, T., & Liu, S. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp01139h · Cited by 511
Self-citationAg2O as a New Visible‐Light Photocatalyst: Self‐Stability and High Photocatalytic Activity
Wang, X., Li, S., Yu, H., Yu, J., & Liu, S. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201101032 · Cited by 479
Self-citationWang, P., Wang, J., Wang, X., Yu, H., Yu, J., Lei, M., & Wang, Y. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.12.009 · Cited by 473
Self-citationOng, W.-J., Tan, L.-L., Chai, S.-P., Yong, S.-T., & Mohamed, A. R. (2014) · Nanoscale · doi:10.1039/c3nr04655a · Cited by 469
Ariza-Tarazona, M. C., Villarreal-Chiu, J. F., Hernández-López, J. M., Rivera De la Rosa, J., Barbieri, V., Siligardi, C., & Cedillo-González, E. I. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122632 · Cited by 468
Enhancement of photocatalytic activity of mesoporous TiO2 by using carbon nanotubes
Yu, Y., Yu, J. C., Yu, J.-G., Kwok, Y.-C., Che, Y.-K., Zhao, J.-C., Ding, L., Ge, W.-K., & Wong, P.-K. (2005) · Applied Catalysis A: General · doi:10.1016/j.apcata.2005.04.057 · Cited by 465
Self-citationTan, H. L., Amal, R., & Ng, Y. H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04441k · Cited by 459
Yu, J., Zhang, L., Cheng, B., & Su, Y. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0707889 · Cited by 454
Self-citationLi, F. B., Li, X. Z., Hou, M. F., Cheah, K. W., & Choy, W. C. H. (2005) · Applied Catalysis A: General · doi:10.1016/j.apcata.2005.02.025 · Cited by 443
Zhao, D., Sheng, G., Chen, C., & Wang, X. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.10.012 · Cited by 435
Yu, J., & Wang, B. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.12.003 · Cited by 423
Self-citationYu, Y., Yu, J. C., Chan, C.-Y., Che, Y.-K., Zhao, J.-C., Ding, L., Ge, W.-K., & Wong, P.-K. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2005.03.008 · Cited by 413
Self-citationCheng, B., Le, Y., Cai, W., & Yu, J. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.09.104 · Cited by 390
Self-citationYu, J., Yu, H., Cheng, B., & Trapalis, C. (2006) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2006.01.003 · Cited by 383
Self-citationYu, J., Liu, S., & Yu, H. (2007) · Journal of Catalysis · doi:10.1016/j.jcat.2007.03.032 · Cited by 371
Self-citationA sonochemical route to visible-light-driven high-activity BiVO4 photocatalyst
Zhou, L., Wang, W., Liu, S., Zhang, L., Xu, H., & Zhu, W. (2006) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2006.01.052 · Cited by 365
Choi, S. K., Kim, S., Lim, S. K., & Park, H. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp104317x · Cited by 347
Dai, K., Lu, L., Liang, C., Liu, Q., & Zhu, G. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.03.039 · Cited by 338
Asiltürk, M., Sayılkan, F., & Arpaç, E. (2009) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2008.12.021 · Cited by 327
Cheng, H., Huang, B., Lu, J., Wang, Z., Xu, B., Qin, X., Zhang, X., & Dai, Y. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp01189d · Cited by 309
Fabrication of α-Fe2O3Nanorod/RGO Composite: A Novel Hybrid Photocatalyst for Phenol Degradation
Pradhan, G. K., Padhi, D. K., & Parida, K. M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402487h · Cited by 309
Hydrothermal preparation and visible-light photocatalytic activity of Bi2WO6 powders
Yu, J., Xiong, J., Cheng, B., Yu, Y., & Wang, J. (2005) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2005.04.003 · Cited by 308
Self-citationLiao, D. L., Badour, C. A., & Liao, B. Q. (2008) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2007.07.008 · Cited by 306
Enhanced photocatalytic activity of TiO2 powder (P25) by hydrothermal treatment
Yu, J., Yu, H., Cheng, B., Zhou, M., & Zhao, X. (2006) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2006.03.021 · Cited by 304
Self-citationYu, J., Yu, X., Huang, B., Zhang, X., & Dai, Y. (2009) · Crystal Growth & Design · doi:10.1021/cg800941d · Cited by 303
Self-citationKim, D. S., Han, S. J., & Kwak, S.-Y. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.07.037 · Cited by 287
Highly Visible Light Active TiO2−xNx Heterojunction Photocatalysts
Etacheri, V., Seery, M. K., Hinder, S. J., & Pillai, S. C. (2010) · Chemistry of Materials · doi:10.1021/cm903260f · Cited by 283
XPS and FT-IR investigation of silicate polymers
Simonsen, M. E., Sønderby, C., Li, Z., & Søgaard, E. G. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3270-9 · Cited by 279
Mo, Z., She, X., Li, Y., Liu, L., Huang, L., Chen, Z., Zhang, Q., Xu, H., & Li, H. (2015) · RSC Advances · doi:10.1039/c5ra19586a · Cited by 272
Nawaz, M., Miran, W., Jang, J., & Lee, D. S. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.10.007 · Cited by 271
Liu, R., Wang, P., Wang, X., Yu, H., & Yu, J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp305774n · Cited by 266
Self-citationDai, G., Yu, J., & Liu, G. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp305669f · Cited by 265
Self-citationLuo, Z., Poyraz, A. S., Kuo, C.-H., Miao, R., Meng, Y., Chen, S.-Y., Jiang, T., Wenos, C., & Suib, S. L. (2015) · Chemistry of Materials · doi:10.1021/cm5035112 · Cited by 264
Xiang, Q., Yu, J., & Jaroniec, M. (2011) · Chemical Communications · doi:10.1039/c1cc10501a · Cited by 258
Self-citationYu, J., Liu, W., & Yu, H. (2008) · Crystal Growth & Design · doi:10.1021/cg700794y · Cited by 258
Self-citationLiqiang, J., Honggang, F., Baiqi, W., Dejun, W., Baifu, X., Shudan, L., & Jiazhong, S. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2005.08.012 · Cited by 257
Omri, A., Lambert, S. D., Geens, J., Bennour, F., & Benzina, M. (2014) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.04.007 · Cited by 68
Fiorenza, R., Bellardita, M., Scirè, S., & Palmisano, L. (2018) · Molecular Catalysis · doi:10.1016/j.mcat.2018.06.002 · Cited by 47
Almond shell activated carbon: adsorbent and catalytic support in the phenol degradation
Omri, A., & Benzina, M. (2014) · Environmental Monitoring and Assessment · doi:10.1007/s10661-014-3664-2 · Cited by 25
Metadata
- Authors
- Yu, J.-G., Yu, H.-G., Cheng, B., Zhao, X.-J., Yu, J. C., & Ho, W.-K.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-11-20
- Volume
- 107
- Issue
- 50
- Pages
- 13871-13879
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W1987744916
- Cited by
- 1,177
- References
- 35
- FWCI
- 18.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.