The DOI matches its Crossref record.
CuO Nanosheets for Sensitive and Selective Determination of H2S with High Recovery Ability
Abstract
In this article, cupric oxide (CuO) leafletlike nanosheets have been synthesized by a facile, low-cost, and surfactant-free method, and they have further been successfully developed for sensitive and selective determination of hydrogen sulfide (H 2 S) with high recovery ability. The experimental results have revealed that the sensitivity and recovery time of the present H 2 S gas sensor are strongly dependent on the working temperature. The best H 2 S sensing performance has been achieved with a low detection limit of 2 ppb and broad linear range from 30 ppb to 1.2 ppm. The gas sensor is reversible, with a quick response time of 4 s and a short recovery time of 9 s. In addition, negligible responses can be observed exposed to 100-fold concentrations of other gases which may exist in the atmosphere such as nitrogen (N 2 ), oxygen (O 2 ), nitric oxide (NO), cabon monoxide (CO), nitrogen dioxide (NO 2 ), hydrogen (H 2 ), and so on, indicating relatively high selectivity of the present H 2 S sensor. The H 2 S sensor based on the CuO nanosheets also shows strong recovery ability and long-term stability, probably due to the effective diffusion of gas toward the whole sensing surface, as well as the different mechanism of H 2 S gas sensor from those reported at CuO nanowires and CuO−SnO 2 nanocomposites, where a layer of CuS or Cu 2 S has formed on the CuO surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
Zhang, Q., Zhang, K., Xu, D., Yang, G., Huang, H., Nie, F., Liu, C., & Yang, S. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.09.003 · Cited by 1,404
Two‐Dimensional Nanostructured Materials for Gas Sensing
Liu, X., Ma, T., Pinna, N., & Zhang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702168 · Cited by 851
Recent Progress on the Development of Chemosensors for Gases
Zhou, X., Lee, S., Xu, Z., & Yoon, J. (2015) · Chemical Reviews · doi:10.1021/cr500567r · Cited by 777
Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials
Meng, Z., Stolz, R. M., Mendecki, L., & Mirica, K. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00311 · Cited by 773
Review—Non-Invasive Monitoring of Human Health by Exhaled Breath Analysis: A Comprehensive Review
Das, S., & Pal, M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab67a6 · Cited by 466
Nanostructured copper oxide semiconductors
Zoolfakar, A. S., Rani, R. A., Morfa, A. J., O'Mullane, A. P., & Kalantar‐Zadeh, K. (2014) · Refubium (Universitätsbibliothek der Freien Universität Berlin) · doi:10.17169/refubium-19959 · Cited by 448
Jeong, S., Kim, J., & Lee, J. (2020) · Advanced Materials · doi:10.1002/adma.202002075 · Cited by 415
Synthesis and Biomedical Applications of Copper Oxide Nanoparticles: An Expanding Horizon
Verma, N., & Kumar, N. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01092 · Cited by 402
Raizada, P., Sudhaik, A., Patial, S., Hasija, V., Parwaz Khan, A. A., Singh, P., Gautam, S., Kaur, M., & Nguyen, V.-H. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2020.06.031 · Cited by 358
CuO Nanoparticles/Ti3C2Tx MXene Hybrid Nanocomposites for Detection of Toluene Gas
Hermawan, A., Zhang, B., Taufik, A., Asakura, Y., Hasegawa, T., Zhu, J., Shi, P., & Yin, S. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c00749 · Cited by 296
Synergy between nanomaterials and volatile organic compounds for non-invasive medical evaluation
Broza, Y. Y., Vishinkin, R., Barash, O., Nakhleh, M. K., & Haick, H. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00317c · Cited by 276
Li, Z., Wang, N., Lin, Z., Wang, J., Liu, W., Sun, K., Fu, Y. Q., & Wang, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02893 · Cited by 270
Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review
M, R., Kulkarni, R. M., & Sunil, D. (2024) · ACS Omega · doi:10.1021/acsomega.3c08573 · Cited by 38
Metadata
- Authors
- Zhang, F., Zhu, A., Luo, Y., Tian, Y., Yang, J., & Qin, Y.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-10-22
- Volume
- 114
- Issue
- 45
- Pages
- 19214-19219
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2328177015
- Cited by
- 192
- References
- 0
- FWCI
- 8.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.