The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries
Abstract
High-capacity SiO powder composite electrodes for rechargeable lithium-ion batteries are prepared with different polymer binders of poly(acrylic acid) (PAA), poly(vinyl alcohol) (PVA), sodium carboxymethyl cellulose (CMCNa), and conventional poly(vinylidene fluoride) (PVdF). Electrode performance of the SiO composites highly depends on selection of binders, and their electrochemical reversibility is drastically improved by using PAA as the binder in comparison to the PVdF, CMCNa, and PVA binders. Coulombic efficiency at the initial cycle is improved for the SiO–PAA composite electrode, and the reversible capacity reaches 700–750 mAh g –1 for continuous fifty cycling test at a rate of 100 mA g –1 . The improvement mechanism of SiO–PAA composite electrode is characterized by X-ray diffraction, electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, self-discharge test, and adhesive strength test. Amorphous PAA polymer not only tightly binds but also covers the individual SiO particles. Moreover, the PAA binder suppresses swelling of the composite electrode with the electrolyte solution compared to the PVdF binder. Through-thickness electric resistance of the PAA composite electrode is much lower than that of the PVdF when it is wet with the electrolyte. It is proposed that these characters of the PAA binder effectively suppress isolation of the SiO powders in the composite electrode associated with the large volume expansion/shrinkage during the lithiation/delithiation processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid
Magasinski, A., Zdyrko, B., Kovalenko, I., Hertzberg, B., Burtovyy, R., Huebner, C. F., Fuller, T. F., Luzinov, I., & Yushin, G. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100871y · Cited by 1,101
Ohzuku, T., Iwakoshi, Y., & Sawai, K. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220849 · Cited by 1,089
Buqa, H., Holzapfel, M., Krumeich, F., Veit, C., & Novák, P. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.073 · Cited by 513
Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D. (2010) · Chemistry of Materials · doi:10.1021/cm902688w · Cited by 499
Hochgatterer, N. S., Schweiger, M. R., Koller, S., Raimann, P. R., Wöhrle, T., Wurm, C., & Winter, M. (2008) · Electrochemical and Solid-State Letters · doi:10.1149/1.2888173 · Cited by 449
Kim, T., Park, S., & Oh, S. M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2790282 · Cited by 216
Functional interface of polymer modified graphite anode
Komaba, S., Ozeki, T., & Okushi, K. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.092 · Cited by 126
Self-citation
Cited by
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Self-citationResearch Development on K-Ion Batteries
Hosaka, T., Kubota, K., Hameed, A. S., & Komaba, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00463 · Cited by 1,346
Self-citationAsenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Silicon oxides: a promising family of anode materials for lithium-ion batteries
Liu, Z., Yu, Q., Zhao, Y., He, R., Xu, M., Feng, S., Li, S., Zhou, L., & Mai, L. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00441b · Cited by 1,033
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Recent Progress in Rechargeable Potassium Batteries
Hwang, J., Myung, S., & Sun, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802938 · Cited by 651
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Ryou, M., Kim, J., Lee, I., Kim, S., Jeong, Y. K., Hong, S., Ryu, J. H., Kim, T., Park, J., Lee, H., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203981 · Cited by 622
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Casimir, A., Zhang, H., Ogoke, O., Amine, J. C., Lu, J., & Wu, G. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.023 · Cited by 600
Interpenetrated Gel Polymer Binder for High‐Performance Silicon Anodes in Lithium‐ion Batteries
Song, J., Zhou, M., Yi, R., Xu, T., Gordin, M. L., Tang, D., Yu, Z., Regula, M., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401269 · Cited by 589
Polymers with Tailored Electronic Structure for High Capacity Lithium Battery Electrodes
Liu, G., Xun, S., Vukmirovic, N., Song, X., Olalde‐Velasco, P., Zheng, H., Battaglia, V. S., Wang, L., & Yang, W. (2011) · Advanced Materials · doi:10.1002/adma.201102421 · Cited by 576
The emerging era of supramolecular polymeric binders in silicon anodes
Kwon, T.-W., Choi, J. W., & Coskun, A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00858a · Cited by 560
Higgins, T. M., Park, S.-H., King, P. J., Zhang, C. (., McEvoy, N., Berner, N. C., Daly, D., Shmeliov, A., Khan, U., Duesberg, G., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b00218 · Cited by 481
Recent advancement of SiOx based anodes for lithium-ion batteries
Chen, T., Wu, J., Zhang, Q., & Su, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.073 · Cited by 427
Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell
Komaba, S., Matsuura, Y., Ishikawa, T., Yabuuchi, N., Murata, W., & Kuze, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.05.017 · Cited by 418
Self-citationRechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M., Edström, K., Ayerbe, E., Berecibar, M., Bhowmik, A., Castelli, I. E., Clark, S., Dominko, R., Erakca, M., Franco, A. A., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102904 · Cited by 376
Luo, F., Liu, B., Zheng, J., Chu, G., Zhong, K., Li, H., Huang, X., & Chen, L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0131514jes · Cited by 372
Advances of polymer binders for silicon‐based anodes in high energy density lithium‐ion batteries
Zhao, Y., Yue, F., Li, S., Zhang, Y., Tian, Z., Xu, Q., Xin, S., & Guo, Y. (2021) · InfoMat · doi:10.1002/inf2.12185 · Cited by 318
Seng, K. H., Park, M.-H., Guo, Z. P., Liu, H. K., & Cho, J. (2013) · Nano Letters · doi:10.1021/nl304716e · Cited by 279
Eshetu, G. G., & Figgemeier, E. (2019) · ChemSusChem · doi:10.1002/cssc.201900209 · Cited by 273
Effect of external pressure and internal stress on battery performance and lifespan
Li, R., Li, W., Singh, A., Ren, D., Hou, Z., & Ouyang, M. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.07.034 · Cited by 254
High energy density calendered Si alloy/graphite anodes
Du, Z., Dunlap, R. A., & Obrovac, M. N. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0941410jes · Cited by 107
Metadata
- Authors
- Komaba, S., Shimomura, K., Yabuuchi, N., Ozeki, T., Yui, H., & Konno, K.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-06-17
- Volume
- 115
- Issue
- 27
- Pages
- 13487-13495
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2312689500
- Cited by
- 405
- References
- 9
- FWCI
- 14.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.