Activity, Selectivity, and Anion-Exchange Membrane Fuel Cell Performance of Virtually Metal-Free Nitrogen-Doped Carbon Nanotube Electrodes for Oxygen Reduction Reaction
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Virtually metal-free, aligned nitrogen-doped carbon nanotubes (N-CNTs) are prepared by an alumina template technique and characterized using XRD, Raman spectroscopy, SEM, and XPS. Highly uniform and aligned nanotubes are identified from SEM. The surface nitrogen concentration in the N-CNTs is estimated to be ∼8.0 at.%. Electrocatalytic oxygen reduction reaction (ORR) activity in alkali media is investigated by rotating disk electrode (RDE) voltammetry and compared with commercial Pt/C (E-TEK). RDE measurements indicated the comparable ORR activity of nitrogen-doped carbon nanotubes with Pt/C. Kinetic analysis reveals that the ORR on nitrogen-doped carbon nanotubes follows the four-electron pathway leading to water. Moreover, during the ORR, nitrogen-doped carbon nanotubes exhibited substantially higher ethanol tolerance than Pt/C. A maximum power density of 37 and 62 mW/cm 2 is observed with N-CNT and Pt/C cathodes, respectively, under anion-exchange membrane fuel cell conditions. Durability measurements performed under fuel cell operating conditions for 30 h indicate the good stability of the catalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Performance Electrocatalysts for Oxygen Reduction Derived from Polyaniline, Iron, and Cobalt
Wu, G., More, K. L., Johnston, C. M., & Zelenay, P. (2011) · Science · doi:10.1126/science.1200832 · Cited by 3,984
High oxygen-reduction activity and durability of nitrogen-doped graphene
Geng, D., Chen, Y., Chen, Y., Li, Y., Li, R., Sun, X., Ye, S., & Knights, S. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00326c · Cited by 1,219
Venkateswara Rao, C., & Viswanathan, B. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9041606 · Cited by 96
Cited by
Metal-Free Catalysts for Oxygen Reduction Reaction
Dai, L., Xue, Y., Qu, L., Choi, H.-J., & Baek, J.-B. (2015) · Chemical Reviews · doi:10.1021/cr5003563 · Cited by 2,380
Anion-exchange membranes in electrochemical energy systems
Varcoe, J. R., Atanassov, P., Dekel, D. R., Herring, A. M., Hickner, M. A., Kohl, P. A., Kucernak, A. R., Mustain, W. E., Nijmeijer, K., Scott, K., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01303d · Cited by 2,051
Heterogeneous nanocarbon materials for oxygen reduction reaction
Wang, D.-W., & Su, D. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43463j · Cited by 1,018
Carbon nanotube catalysts: recent advances in synthesis, characterization and applications
Yan, Y., Miao, J., Yang, Z., Xiao, F.-X., Yang, H. B., Liu, B., & Yang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00492b · Cited by 798
Doped graphene for metal-free catalysis
Kong, X.-K., Chen, C.-L., & Chen, Q.-W. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60401b · Cited by 783
Metadata
- Authors
- Venkateswara Rao, C., & Ishikawa, Y.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-02-06
- Volume
- 116
- Issue
- 6
- Pages
- 4340-4346
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2333614236
- Cited by
- 132
- References
- 3
- FWCI
- 8.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.