Surface Platinum Electrooxidation in the Presence of Oxygen
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Understanding the influences of Pt surface oxides is crucial for elucidating the oxygen reduction reaction (ORR) in fuel cells, particularly with an eye toward the design of next-generation Pt-based electrocatalysts with improved activity. Although gaseous O 2 is always present during the ORR, the majority of previous Pt surface oxide studies were conducted in the absence of O 2 due to experimental limitations. In this study, multiple in situ techniques were applied to study the ORR on platinum in the presence of O 2 . The thin channel flow Pt electrode and the electrochemical quartz microbalance (EQCM) techniques on Pt polycrystalline electrodes suggest that the influence of O 2 in the electrolyte on mass change and charge transfer is negligible. The oxide formation followed a logarithm-growth behavior initiating as early as 0.2 s after potential steps. This suggests that no slow conversion of oxide species (e.g., between OH ads and O ads ) takes place. Despite the negligible effect of O 2 on the measured oxide coverage, steady-state X-ray absorption spectroscopy (XAS) measurements conducted on dispersed Pt nanoparticles suggested that, only when under O 2 -sparging, place exchange between adsorbed oxide(s) and the Pt surface layer(s) initiated at potentials as low as 0.75 V. This is significantly lower than that observed in an O 2 -free electrolyte (>1.1 V). The effects of O 2 on adsorbed oxide species illustrate the complexities of applying model systems to the real world in order to arrive at a comprehensive description of both the oxygen reduction and the Pt dissolution processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Zhang, J., Vukmirovic, M. B., Xu, Y., Mavrikakis, M., & Adzic, R. R. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462335 · Cited by 1,106
X-ray Absorption Spectroscopy of Low Temperature Fuel Cell Catalysts
Russell, A. E., & Rose, A. (2004) · Chemical Reviews · doi:10.1021/cr020708r · Cited by 303
Cited by
Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100859 · Cited by 737
Abbott, D. F., Lebedev, D., Waltar, K., Povia, M., Nachtegaal, M., Fabbri, E., Copéret, C., & Schmidt, T. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02625 · Cited by 492
Durability of platinum-based fuel cell electrocatalysts: Dissolution of bulk and nanoscale platinum
Cherevko, S., Kulyk, N., & Mayrhofer, K. J. J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.005 · Cited by 377
Surface engineering for stable electrocatalysis
Do, V.-H., & Lee, J.-M. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00292f · Cited by 167
Sasaki, K., Marinkovic, N., Isaacs, H. S., & Adzic, R. R. (2016) · ACS Catalysis · doi:10.1021/acscatal.5b01862 · Cited by 138
Metadata
- Authors
- Kongkanand, A., & Ziegelbauer, J. M.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-01-31
- Volume
- 116
- Issue
- 5
- Pages
- 3684-3693
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2049918641
- Cited by
- 108
- References
- 3
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.