Kinetics and Mechanism of Cellulose Pyrolysis
Open accessThe DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
Abstract
In this paper we report the kinetics and chemistry of cellulose pyrolysis using both a Pyroprobe reactor and a thermogravimetric analyzer mass spectrometer (TGA-MS). We have identified more than 90% of the products from cellulose pyrolysis in a Pyroprobe reactor with a liquid nitrogen trap. The first step in the cellulose pyrolysis is the depolymerization of solid cellulose to form levoglucosan (LGA; 6,8-dioxabicyclo[3.2.1]octane-2,3,4-triol). LGA can undergo dehydration and isomerization reactions to form other anhydrosugars including levoglucosenone (LGO; 6,8-dioxabicyclo[3.2.1]oct-2-en-4-one), 1,4:3,6-dianhydro-β- d -glucopyranose (DGP) and 1,6-anhydro-β- d -glucofuranose (AGF; 2,8-dioxabicyclo[3.2.1]octane-4,6,7-triol). The anhydrosugars can react further to form furans, such as furfural (furan-2-carbaldehyde) and hydroxymethylfurfural (HMF; 5-(hydroxymethyl)furan-2-carbaldehyde) by dehydration reactions or hydroxyacetone (1-hydroxypropan-2-one), glycolaldehyde (2-hydroxyacetaldehyde), and glyceraldehyde (2,3-dihydroxypropanal) by fragmentation and retroaldol condensation reactions. Carbon monoxide and carbon dioxide are formed from decarbonylation and decarboxylation reactions. Char is formed from polymerization of the pyrolysis products. The pyrolytic conversion of cellulose was fitted to two different reaction models. The first model (Model I) combined the first-order kinetic model with a thermal-lag model that assumed the temperature difference between the thermocouple and specimen in TGA to be directly proportional to the heating rate. The second model (Model II) combined the first-order kinetic model with an energy balance that took into account the heat transfer at the sample boundary including the heat flow by endothermic pyrolysis reaction. Both models were able to adequately fit the empirical data. The kinetic parameters obtained from both models were similar. Cellulose pyrolysis had an activation energy of 198 kJ mol −1 . Model I is computationally easier, however Model II is physically more realistic. Importantly, our results indicate that the intrinsic kinetics for cellulose pyrolysis are not a function of heating rate. During the pyrolysis of cellulose a thermal temperature gradient between the cellulose and heater can occur due to the endothermic pyrolysis reaction. A faster heating rate can magnify the thermal-lag, which leads kinetic derivations to artificial outcomes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The primary pyrolytic products from cellulose are anhydrosugars, which can be further converted into some light oxygenates (e.g., furans, aldehydes, ketones, acids, etc.) at higher temperatures (Fig. 2B) [75, 76].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [76]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“During catalytic pyrolysis, hemicellulose underwent decomposition into a variety of gaseous products and intermediates.”
From Catalytic pyrolysis of liquor-industry waste: Product and mechanism analysis (2024) · cites this paper as Lin et al., 2009
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
Renewable Fuels and Chemicals by Thermal Processing of Biomass
Bridgwater, A. V. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00142-0 · Cited by 1,920
An overview of fast pyrolysis of biomass
Bridgwater, A. V., Meier, D., & Radlein, D. (1999) · Organic Geochemistry · doi:10.1016/s0146-6380(99)00120-5 · Cited by 1,752
Fast pyrolysis processes for biomass
Bridgwater, A. (2000) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(99)00007-6 · Cited by 1,751
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
Biomass for renewable energy, fuels, and chemicals
(1999) · Choice Reviews Online · doi:10.5860/choice.36-4508 · Cited by 1,100
Mohan, D., Pittman, C. U., Bricka, M., Smith, F., Yancey, B., Mohammad, J., Steele, P. H., Alexandre-Franco, M. F., Gómez-Serrano, V., & Gong, H. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.01.020 · Cited by 973
A kinetic model for pyrolysis of cellulose
Bradbury, A. G. W., Sakai, Y., & Shafizadeh, F. (1979) · Journal of Applied Polymer Science · doi:10.1002/app.1979.070231112 · Cited by 889
Molecular characterization of the pyrolysis of biomass
Evans, R. J., & Milne, T. A. (1987) · Energy & Fuels · doi:10.1021/ef00002a001 · Cited by 887
Research works printed but not linked: 5
- Tang W. K. U.S., 1967, For. Serv. Res. Pap. FPL, 71
- Fung D. P. C., 1969, Tappi, 52, 319
- Hirata T., 1974, Ringyo Shikenjo Kenkyu Hokoku, 263, 1
- Lewellen, P.; Peters, W. A.; Howard, J. B.16th International Symposium on Combustion, (MIT, Cambridge, Massachusetts, August 15-20, 1976)Combustion Institute:Pittsburgh, PA, 1977, p.1741–1780.
- Kilzer F. J., 1965, Pyrodynamics, 2, 151
Cited by
Items 201–300 of 777
Kumagai, S., Grause, G., Kameda, T., & Yoshioka, T. (2015) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-015-0417-4 · Cited by 69
Hamad, H. A. F., Bailón‐García, E., Morales‐Torres, S., Carrasco-Marín, F., Pérez‐Cadenas, A. F., & Maldonado‐Hódar, F. J. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.07.043 · Cited by 68
Long, J., Guo, B., Li, X., Jiang, Y., Wang, F., Tsang, S. C. E., Wang, L., & Yu, K. M. K. (2011) · Green Chemistry · doi:10.1039/c1gc15597k · Cited by 68
Microstructure, distribution and properties of conductive polypyrrole/cellulose fiber composites
Wang, H., Leaukosol, N., He, Z., Fei, G., Si, C., & Ni, Y. (2013) · Cellulose · doi:10.1007/s10570-013-9945-z · Cited by 67
Pyrolysis kinetics and multi-objective inverse modelling of cellulose at the microscale
Richter, F., & Rein, G. (2017) · Fire Safety Journal · doi:10.1016/j.firesaf.2017.03.082 · Cited by 67
Feng, Y., Hao, H., Chow, C. L., & Lau, D. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151023 · Cited by 66
Production of Liquid Feedstock from Biomass via Steam Pyrolysis in a Fluidized Bed Reactor
Kantarelis, E., Yang, W., & Blasiak, W. (2013) · Energy & Fuels · doi:10.1021/ef400580x · Cited by 66
Kudo, S., Huang, X., Asano, S., & Hayashi, J. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01062 · Cited by 66
Understanding ethanol versus methanol formation from insulating paper in power transformers
Rodriguez-Celis, E. M., Duchesne, S., Jalbert, J., & Ryadi, M. (2015) · Cellulose · doi:10.1007/s10570-015-0693-0 · Cited by 66
Zhou, F., Wang, H., Wang, S., Zhao, J., Qu, X., Wang, D., Cai, Y., Zheng, Z., Wang, D., & Yin, H. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.3c07279 · Cited by 65
Effect of Particle Size on Low-Temperature Pyrolysis of Woody Biomass
Bennadji, H., Smith, K., Serapiglia, M. J., & Fisher, E. M. (2014) · Energy & Fuels · doi:10.1021/ef501869e · Cited by 65
Zhang, M., Geng, Z., & Yu, Y. (2015) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2015.05.001 · Cited by 65
Hu, B., Lü, Q., Wu, Y., Zhang, Z.-X., Cui, M., Liu, D.-J., Dong, C., & Yang, Y. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.06.007 · Cited by 65
Lin, X., Kong, L., Ren, X., Zhang, D., Cai, H., & Lei, H. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.09.071 · Cited by 65
Wani, I., Ramola, S., Garg, A., & Kushvaha, V. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-021-01346-8 · Cited by 64
Li, Y., Du, Y., Sun, G., Cheng, J., Song, G., Song, M., Su, F., Yang, F., Xie, L., & Chen, C. (2021) · EcoMat · doi:10.1002/eom2.12091 · Cited by 64
Parihar, A., Vongsvivut, J. P., & Bhattacharya, S. (2019) · ACS Omega · doi:10.1021/acsomega.8b03681 · Cited by 63
Braghiroli, F. L., Bouafif, H., Neculita, C. M., & Koubaa, A. (2019) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00797-5 · Cited by 63
A review of lignocellulosic biomass-based shape-stable composite phase change materials
Sun, M., Wang, Q., & Di, H. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109114 · Cited by 63
Kinetic modeling of polyurethane pyrolysis using non-isothermal thermogravimetric analysis
Jomaa, G., Goblet, P., Coquelet, C., & Morlot, V. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.05.009 · Cited by 63
Zheng, A., Jiang, L., Zhao, Z., Huang, Z., Zhao, K., Wei, G., & Li, H. (2016) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.234 · Cited by 63
Douvartzides, S. L., Charisiou, N. D., Wang, W., Papadakis, V. G., Polychronopoulou, K., & Goula, M. A. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.12.083 · Cited by 64
Zheng, A., Huang, Z., Wei, G., Zhao, K., Jiang, L., Zhao, Z., Tian, Y., & Li, H. (2020) · iScience · doi:10.1016/j.isci.2019.100814 · Cited by 62
Effect of potassium inorganic and organic salts on the pyrolysis kinetics of cigarette paper
Zhao, D., Dai, Y., Chen, K., Sun, Y., Yang, F. Y., & Kunyan, C. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.03.007 · Cited by 62
Methods for Natural and Synthetic Polymers Recovery from Textile Waste
Ștefan, D. S., Boșomoiu, M., & Ștefan, M. (2022) · Polymers · doi:10.3390/polym14193939 · Cited by 61
Mochizuki, T., Chen, S., Toba, M., & Yoshimura, Y. (2013) · Applied Catalysis A General · doi:10.1016/j.apcata.2013.02.022 · Cited by 61
Souza, D. R. D. S., de Mesquita, J. P., Lago, R. M., Caminhas, L. D., & Pereira, F. V. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.04.073 · Cited by 61
Hurt, M. R., Degenstein, J. C., Gawecki, P., Borton, D. J., Vinueza, N. R., Yang, L., Agrawal, R., Delgass, W. N., Ribeiro, F. H., & Kenttämaa, H. I. (2013) · Analytical Chemistry · doi:10.1021/ac402380h · Cited by 60
Production of aromatics by catalytic fast pyrolysis of cellulose in a bubbling fluidized bed reactor
Karanjkar, P. U., Coolman, R., Huber, G. W., Blatnik, M. T., Almalkie, S., Kops, S. M. D. B., Mountziaris, T. J., & Conner, W. C. (2014) · AIChE Journal · doi:10.1002/aic.14376 · Cited by 60
Self-citationGhosh, D., Golan, A., Takahashi, L. K., Krylov, A. I., & Ahmed, M. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201446r · Cited by 59
Understanding cellulose pyrolysis under hydrogen atmosphere
Tan, L., Miao, K., Zhao, Z., Li, Y., Wang, H., Watanabe, A., Teramae, N., & Wang, K. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.115195 · Cited by 59
Poplar wood torrefaction: Kinetics, thermochemistry and implications
Chai, M., Xie, L., Yu, X., Zhang, X., Yang, Y., Rahman, M. M., Blanco, P. H., Liu, R., Bridgwater, A. V., & Cai, J. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110962 · Cited by 58
“Cellulose is an organic polysaccharide consisting of a linear chain of several hundred to thousands of β poly linked D-glucose units [4].”
BackgroundLiu, D., Yu, Y., & Wu, H. (2013) · Energy & Fuels · doi:10.1021/ef301823g · Cited by 58
A sectional approach for biomass: Modelling the pyrolysis of cellulose
Lin, T., Goos, E., & Riedel, U. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.03.048 · Cited by 58
From cellulose to kerogen: molecular simulation of a geological process
Atmani, L., Bichara, C., Pellenq, R. J. ‐., Damme, H. V., van Duin, A. C. T., Raza, Z., Truflandier, L. A., Obliger, A., Kralert, P. G., Ulm, F., et al. (2017) · Chemical Science · doi:10.1039/c7sc03466k · Cited by 58
Sangaré, D., Bostyn, S., Moscosa-Santillán, M., García, P. Á., Belandria, V., & Gökalp, İ. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.126598 · Cited by 58
Alejandro, J.-A., Fonts, Ì., Chejne, F., & Arauzo, J. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.08.008 · Cited by 57
Ambient-dried thermal superinsulating monolithic silica-based aerogels with short cellulosic fibers
Markevicius, G., Ladj, R., Niemeyer, P., Budtova, T., & Rigacci, A. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0514-3 · Cited by 57
Zheng, A., Xia, S., Cao, F., Liu, S., Yang, X., Zhao, Z., Tian, Y., & Li, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127045 · Cited by 57
A comparative study of cellulose I and II and fibers and nanocrystals
Yue, Y. (2011) · Louisiana State University · doi:10.31390/gradschool_theses.764 · Cited by 56
The interplay between chemistry and heat/mass transfer during the fast pyrolysis of cellulose
Westerhof, R. J. M., Oudenhoven, S. R. G., Marathe, P. S., Engelen, M., Garcìa-Pèrez, M., Wang, Z., & Kersten, S. R. A. (2016) · Reaction Chemistry & Engineering · doi:10.1039/c6re00100a · Cited by 55
Mohammed, I. Y., Abakr, Y. A., & Mokaya, R. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103093 · Cited by 55
Perez, B. A., Krishna, J. V. J., & Toraman, H. E. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143637 · Cited by 54
TG-FTIR and Py-GC–MS analysis of a model compound of cellulose – glyceraldehyde
Wu, S., Shen, D., Hu, J., Xiao, R., & Zhang, H. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.02.009 · Cited by 53
Kinetic analysis of CO2 gasification of corn straw
Wang, Y., Ge, Z., Shang, F., Zhou, C., Guo, S., & Ren, C. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.12.074 · Cited by 52
Norinaga, K., Yang, H., Tanaka, R., Appari, S., Iwanaga, K., Takashima, Y., Kudo, S., Shoji, T., & Hayashi, J. (2014) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2014.07.008 · Cited by 52
Integration of biomass catalytic pyrolysis and methane aromatization over Mo/HZSM-5 catalysts
Yang, Z., Kumar, A., & Apblett, A. W. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.06.021 · Cited by 52
The Role of Heat Transfer Limitations in Polymer Pyrolysis at the Microscale
Richter, F., & Rein, G. (2018) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2018.00018 · Cited by 52
Cao, F., Xia, S., Yang, X., Wang, C., Wang, Q., Cui, C., & Zheng, A. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123809 · Cited by 52
Jiang, M. Y., Bi, D., Wang, T., Gao, Z., & Liu, J. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105177 · Cited by 52
Williams, B. L., Ding, H., Hou, Z., Paul, P. O., Lewis, F. A., Smith, A. T., & Sun, L. (2021) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-021-00299-w · Cited by 52
Sunlight promoted removal of toxic hexavalent chromium by cellulose derived photoactive carbon dots
Aggarwal, R., Saini, D., Sonkar, S. K., Sonker, A. K., & Westman, G. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.132287 · Cited by 52
Chua, Y. W., Wu, H., & Yu, Y. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.08.014 · Cited by 51
Pyrolysis of eastern redcedar: Distribution and characteristics of fast and slow pyrolysis products
Yang, Z., Kumar, A., Huhnke, R. L., Buser, M. D., & Capareda, S. C. (2015) · Fuel · doi:10.1016/j.fuel.2015.10.101 · Cited by 51
Zhang, Y., Li, Y., Zheng, H., Zhu, M., Liu, J., Yang, T., Zhang, C., & Yang, L. (2020) · Cellulose · doi:10.1007/s10570-019-02960-6 · Cited by 51
Microwave-enhanced formation of glucose from cellulosic waste
Fan, J., bruyn, M. D., Zhu, Z., Budarin, V. L., Gronnow, M. J., Gomez, L. D., MacQuarrie, D. J., & Clark, J. H. (2013) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2013.01.004 · Cited by 49
Yao, Q., Xu, L., Guo, C., ZiGuo, Y., Zhang, Y., & Fu, Y. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.03.004 · Cited by 49
Zhang, B., Zhong, Z., Zhang, J., & Ruan, R. R. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.04.009 · Cited by 49
Pyrolysis of sewage sludge by solid heat carrier
Gerasimov, G. Y., Khaskhachikh, V., Potapov, O., Двоскин, Г. И., Kornil’eva, V. F., & Dudkina, L. M. (2019) · Waste Management · doi:10.1016/j.wasman.2019.02.016 · Cited by 49
Tsubaki, S., Nakasako, Y., Noriko, O., Nishioka, M., Fujii, S., & Wada, Y. (2019) · Green Chemistry · doi:10.1039/c9gc02745a · Cited by 49
Review of the application of biomass-derived porous carbon in lithium-sulfur batteries
Li, Q., Liu, Y., Wang, Y., Chen, Y., Guo, X., Wu, Z., & Zhong, B. (2020) · Ionics · doi:10.1007/s11581-020-03694-3 · Cited by 49
A review on the research progress and future development of nano‐modified cellulose insulation paper
Tang, C., Chen, R., Zhang, J., Xiao, P., Chen, B., & Zhang, L. (2021) · IET Nanodielectrics · doi:10.1049/nde2.12032 · Cited by 49
Clemente-Castro, S., Palma, A., Montoya, M. R., Giráldez, I., & Díaz, M. J. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105457 · Cited by 49
Combustion Chemistry and Decomposition Kinetics of Forest Fuels
Коробейничев, О. П., Paletsky, A. A., Gonchikzhapov, M. B., Shundrina, I. K., Chen, H., & Liu, N. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.08.054 · Cited by 48
Shao, S., Zhang, H., Xiao, R., Li, X., & Cai, Y. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.05.021 · Cited by 48
Revalorization of Coffee Waste
Cerino-Córdova, F. J., Dávila-Guzmán, N. E., García-León, A. M., Salazar-Rábago, J. J., & Regalado, E. S. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.92303 · Cited by 48
Role of precursor microstructure in the development of graphene quantum dots from biomass
Abbas, A., Abbas, S., Tabish, T. A., Bull, S. J., Phan, A. N., & Lim, T. M. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106154 · Cited by 48
Vanderfleet, O. M., D’Acierno, F., Isogai, A., MacLachlan, M. J., Michal, C. A., & Cranston, E. D. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c01665 · Cited by 48
Establishing the irradiation dose for paper decontamination
Moise, V., Vîrgolici, M., Neguţ, D., Manea, M. M., Alexandru, M., Trandafir, L., Zorilă, F. L., Talasman, C. M., Manea, D. L., Nisipeanu, S. E., et al. (2011) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2011.11.063 · Cited by 48
Zhang, E., Liu, J., Zhang, C., Zheng, P., Nakanishi, Y., & Wu, T. (2023) · Energies · doi:10.3390/en16031396 · Cited by 47
Pyrolytic behavior of lignocellulosic-based polysaccharides
Ghalibaf, M., Doddapaneni, T. R. K. C., & Alén, R. J. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7919-y · Cited by 47
Chen, N., & Pilla, S. (2021) · Composites Part C Open Access · doi:10.1016/j.jcomc.2021.100225 · Cited by 47
Understanding catalytic effects of bentonite/clinoptilolite on biomass pyrolysis
Mohamed, B. A., Ellis, N., Kim, C. S., & Bi, X. T. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.04.117 · Cited by 46
Manić, N. G., Janković, B., & Dodevski, V. M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09675-y · Cited by 46
Applications of microwave energy in gas production and tar removal during biomass gasification
Guo, F., Dong, Y., Tian, B., Du, S., Liang, S., Zhou, N., Wang, Y., Chen, P. L., & Ruan, R. R. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se01024c · Cited by 46
Alves, A. K., Hauschild, T., Basegio, T. M., & Berutti, F. A. (2024) · Scientific Reports · doi:10.1038/s41598-024-65959-5 · Cited by 45
Carbon Quantum Dots with Tunable Size and Fluorescence Intensity for Development of a Nano‐biosensor
Park, S., Tan, J. K. S., Mo, X., Song, Y., Lim, J., Liew, X. R., Chung, H., & Kim, S. (2025) · Small · doi:10.1002/smll.202404524 · Cited by 44
Tamagno, I. J., Alves, J. L. F., Brusamarello, C. Z., & Domenico, M. D. (2025) · Bioresource Technology Reports · doi:10.1016/j.biteb.2025.102155 · Cited by 44
The primary products of cellulose pyrolysis in the absence of extraparticle reactions
Yu, J., Paterson, N., & Millan-Agorio, M. (2018) · Fuel · doi:10.1016/j.fuel.2018.10.059 · Cited by 44
Nam, S., Hillyer, M. B., & Condon, B. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115374 · Cited by 44
Ramírez-Estrada, A., Mena-Cervantes, V. Y., Mederos-Nieto, F. S., Pineda-Flores, G., & Hernández‐Altamirano, R. (2021) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-021-03309-y · Cited by 44
Wang, W., Wang, M., Huang, J., Li, X., Cai, L., Shi, S. Q., Cui, Y., Chen, L., & Ni, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120596 · Cited by 43
Zhao, S., & Luo, Y. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c02247 · Cited by 43
Bio-gasoline production from co-cracking of hydroxypropanone and ethanol
Wang, S., Cai, Q., Wang, X., Guo, Z., & Luo, Z. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.02.005 · Cited by 43
Xue, Q., & Fox, R. O. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503806p · Cited by 43
The impact of the thermal lag on the interpretation of cellulose pyrolysis
Czajka, K. (2021) · Energy · doi:10.1016/j.energy.2021.121497 · Cited by 42
Carbonfasern: Präkursor‐Systeme, Verarbeitung, Struktur und Eigenschaften
Frank, E., Steudle, L. M., Ingildeev, D., Spörl, J. M., & Buchmeiser, M. R. (2014) · Angewandte Chemie · doi:10.1002/ange.201306129 · Cited by 42
Jia, L., Dufour, A., Brech, Y. L., Authier, O., & Mauviel, G. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.12.021 · Cited by 42
Chan, L. K., Nguyen, K. Q., Karim, N., Yang, Y., Rice, R. H., He, G., Denison, M. S., & Nguyen, T. B. (2020) · Atmospheric chemistry and physics · doi:10.5194/acp-20-539-2020 · Cited by 42
Li, H., Mašek, O., Harper, A., & Ocone, R. (2021) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24123 · Cited by 42
Cellulose biosynthesis using simple sugars available in residual cacao mucilage exudate
Saavedra, O. L., Durán, D., Cabezas, J., Hernández, I., Blanco‐Tirado, C., & Combariza, M. Y. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118645 · Cited by 42
Synthesis of Nano-Spherical Nickel by Templating Hibiscus Flower Petals
Kar, A., & Ray, A. K. (2014) · American Journal of Nano Research and Applications · doi:10.11648/j.nano.20140202.11 · Cited by 42
Cheng, Y., Wang, Z., Gilbert, C. J., Fan, W., & Huber, G. W. (2012) · Angewandte Chemie · doi:10.1002/ange.201205230 · Cited by 42
Self-citationSamuelsson, L. N., Moriana, R., Babler, M. U., Ek, M., & Engvall, K. (2015) · Fuel · doi:10.1016/j.fuel.2014.11.079 · Cited by 41
“[7] Acros cellulose 6–9 – – – – – 624 5.”
BackgroundMethodMainali, K., & Garcìa-Pèrez, M. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105791 · Cited by 41
ENERGY AND MASS BALANCE IN THE PYROLYSIS PROCESS OF Eucalyptus WOOD
de Jesus, M. S., Napoli, A., Trugilho, P. F., Junior, A. A. A., Mendoza-Martinez, C., & Freitas, T. P. (2018) · CERNE · doi:10.1590/01047760201824032561 · Cited by 41
Worldwide developments and challenges for solar pyrolysis
Maytorena, V. M., & Montoya, D. A. B. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e35464 · Cited by 40
Sahayaraj, D. V., Gautam, R., & Vinu, R. (2018) · Algal Research · doi:10.1016/j.algal.2018.08.026 · Cited by 40
Sun, S., Zhang, Y., Liu, K., Chen, X., Jiang, C., Huang, M., Zang, H., & Li, C. (2019) · Cellulose · doi:10.1007/s10570-019-02798-y · Cited by 40
Osatiashtiani, A., Zhang, J., Stefanidis, S. D., Zhang, X., & Bridgwater, A. V. (2022) · Fuel · doi:10.1016/j.fuel.2022.125279 · Cited by 40
Metadata
- Authors
- Lin, Y.-C., Cho, J., Tompsett, G. A., Westmoreland, P. R., & Huber, G. W.
- Affiliations
- University of Massachusetts Amherst (US)
- Corresponding author
- Huber, George W.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-10-22
- Volume
- 113
- Issue
- 46
- Pages
- 20097-20107
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2015108915
- Cited by
- 698
- References
- 73
- Citations by year
- 2026: 31 · 2025: 39 · 2024: 43 · 2023: 43 · 2022: 40 · 2021: 45 · 2020: 52 · 2019: 53 · 2018: 49 · 2017: 36 · 2016: 51 · 2015: 43 · 2014: 46 · 2013: 46 · 2012: 34
- FWCI
- 15.85
- Type
- journal article
- Language
- en
- Open access
- green
- works.bepress.com
- Locations
- The Journal of Physical Chemistry C (publishedVersion)
- ScholarWorks@UMassAmherst (University of Massachusetts Amherst) (submittedVersion)
- Scholarworks (University of Massachusetts Amherst) (submittedVersion)
- Funders
- National Science Foundation
- National Science Council
- Defense Advanced Research Projects Agency (W911NF-09-2-0010)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Catalysis › Catalysis for Biomass Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
- Keywords
- cellulose pyrolysis, pyrolysis kinetics, reaction mechanism, levoglucosan, anhydro sugars, levoglucosenone, furfural, 5-hydroxymethylfurfural, furan, heat transfer, activation energy, kinetic parameters, char formation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.