The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
High Open-Circuit Voltage Solar Cells Based on Organic–Inorganic Lead Bromide Perovskite
Abstract
Mesoscopic solar cells, based on solution-processed organic-inorganic perovskite absorbers, are a promising avenue for converting solar to electrical energy. We used solution-processed organic-inorganic lead halide perovskite absorbers, in conjunction with organic hole conductors, to form high voltage solar cells. There is a dire need for low-cost cells of this type, to drive electrochemical reactions or as the high photon energy cell in a system with spectral splitting. These perovskite materials, although spin-coated from solution, form highly crystalline materials. Their simple synthesis, along with high chemical versatility, allows tuning their electronic and optical properties. By judicious selection of the perovskite lead halide-based absorber, matching organic hole conductor, and contacts, a cell with a ∼ 1.3 V open circuit voltage was made. While further study is needed, this achievement provides a general guideline for additional improvement of cell performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Artificial Photosynthesis: Solar Splitting of Water to Hydrogen and Oxygen
Bard, A. J., & Fox, M. A. (1995) · Accounts of Chemical Research · doi:10.1021/ar00051a007 · Cited by 2,577
Liquid-crystalline semiconducting polymers with high charge-carrier mobility
McCulloch, I., Heeney, M., Bailey, C., Genevicius, K., MacDonald, I., Shkunov, M., Sparrowe, D., Tierney, S., Wagner, R., Zhang, W., et al. (2006) · Nature Materials · doi:10.1038/nmat1612 · Cited by 2,151
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Low band gap polymers for organic photovoltaics
BUNDGAARD, E., & KREBS, F. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.01.015 · Cited by 1,346
Conducting tin halides with a layered organic-based perovskite structure
Mitzi, D. B., Feild, C. A., Harrison, W. T. A., & Guloy, A. M. (1994) · Nature · doi:10.1038/369467a0 · Cited by 1,100
Tanaka, K., Takahashi, T., Ban, T., Kondo, T., Uchida, K., & Miura, N. (2003) · Solid State Communications · doi:10.1016/s0038-1098(03)00566-0 · Cited by 975
Templating and structural engineering in organic–inorganic perovskites
Mitzi, D. B. (2001) · Journal of the Chemical Society, Dalton Transactions · doi:10.1039/b007070j · Cited by 945
Conducting Layered Organic-inorganic Halides Containing 〈110〉-Oriented Perovskite Sheets
Mitzi, D. B., Wang, S., Feild, C. A., Chess, C. A., & Guloy, A. M. (1995) · Science · doi:10.1126/science.267.5203.1473 · Cited by 808
Synthesis, Structure, and Properties of Organic‐Inorganic Perovskites and Related Materials
Mitzi, D. B. (1999) · Progress in Inorganic Chemistry · doi:10.1002/9780470166499.ch1 · Cited by 805
Mitzi, D. B., Chondroudis, K., & Kagan, C. R. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.451.0029 · Cited by 714
Tuning the Band Gap in Hybrid Tin Iodide Perovskite Semiconductors Using Structural Templating
Knutson, J. L., Martin, J. D., & Mitzi, D. B. (2005) · Inorganic Chemistry · doi:10.1021/ic050244q · Cited by 562
Mitzi, D. B., Dimitrakopoulos, C. D., & Kosbar, L. L. (2001) · Chemistry of Materials · doi:10.1021/cm010105g · Cited by 384
Highly Luminescent Lead Bromide Perovskite Nanoparticles Synthesized with Porous Alumina Media
Kojima, A., Ikegami, M., Teshima, K., & Miyasaka, T. (2012) · Chemistry Letters · doi:10.1246/cl.2012.397 · Cited by 356
Delgado, M. C. R., Kim, E.-G., Filho, D. A. D. S., & Bredas, J.-L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja908173x · Cited by 356
Solution-processed inorganic semiconductors
Mitzi, D. B. (2004) · Journal of Materials Chemistry · doi:10.1039/b403482a · Cited by 341
Tuladhar, S. M., Poplavskyy, D., Choulis, S. A., Durrant, J. R., Bradley, D. D. C., & Nelson, J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400337 · Cited by 234
Photovoltaic efficiency limits and material disorder
Nayak, P. K., Garcia-Belmonte, G., Kahn, A., Bisquert, J., & Cahen, D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03178g · Cited by 202
Self-citationAll-Solid-State, Semiconductor-Sensitized Nanoporous Solar Cells
Hodes, G., & Cahen, D. (2012) · Accounts of Chemical Research · doi:10.1021/ar200219h · Cited by 102
Self-citation
Cited by
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Metadata
- Authors
- Edri, E., Kirmayer, S., Cahen, D., & Hodes, G.
- Venue
- The Journal of Physical Chemistry Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-03-06
- Volume
- 4
- Issue
- 6
- Pages
- 897-902
- ISSN
- 1948-7185 (ISSN-L)
- OpenAlex
- W2314579407
- Cited by
- 541
- References
- 23
- FWCI
- 54.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.