The DOI matches its Crossref record.
Self-Assembled Molecular Films of Aminosilanes and Their Immobilization Capacities
Abstract
The assembly of two aminosilanes on silicon dioxide surfaces is investigated in this work. It is found that for 3-aminopropyltrimethoxysilane (APS), a smaller concentration of the silane and trace amounts of water in the deposition medium, an optimum time, and a postdeposition thermal curing are necessary to obtain a high primary-amine content. By optimization of deposition conditions, uniform APS films with a primary-amine content of 88.6% were obtained. The dependence of the primary-amine content on the experimental parameters is related to the extent to which amines are lost to hydrogen bonding with each other or with the substrate surface. Whenp-aminophenyltrimethoxysilane (APhS) was used, the primary-amine content in the film reached 100% and the surface morphology was more uniform than that of APS films under the same conditions. This is attributed to the rigid phenyl component in APhS that reduces opportunities for hydrogen bonding. In a comparison of the immobilization capacities of the different aminosilane substrates for pyromellitic dianhydride (PMDA), it is observed that higher primary-amine content favors higher uptake, and the APhS film yields 100% PMDA coverage. We infer that primary-amine content could be a measure of the film morphology and accessibility of the substrate amine groups.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
XPS and NEXAFS studies of aliphatic and aromatic amine species on functionalized surfaces
Graf, N., Yegen, E., Gross, T., Lippitz, A., Weigel, W., Krakert, S., Terfort, A., & Unger, W. E. S. (2009) · Surface Science · doi:10.1016/j.susc.2009.07.029 · Cited by 481
Zhu, M., Lerum, M. Z., & Chen, W. (2012) · Langmuir · doi:10.1021/la203638g · Cited by 461
Sypabekova, M., Hagemann, A., Rho, D., & Kim, S. (2022) · Biosensors · doi:10.3390/bios13010036 · Cited by 304
Biofunctionalization of Multiplexed Silicon Photonic Biosensors
Puumala, L. S., Grist, S. M., Morales, J. M., Bickford, J. R., Chrostowski, L., Shekhar, S., & Cheung, K. C. (2022) · Biosensors · doi:10.3390/bios13010053 · Cited by 55
Metadata
- Authors
- Zhang, F., & Srinivasan, M. P.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-02-19
- Volume
- 20
- Issue
- 6
- Pages
- 2309-2314
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2043270714
- Cited by
- 238
- References
- 0
- FWCI
- 5.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.