Synthesis of Copolymer Brushes Endowed with Adhesion to Stainless Steel Surfaces and Antibacterial Properties by Controlled Nitroxide-Mediated Radical Polymerization
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
Novel copolymer brushes have been synthesized by a two-step "grafting from" method that consists of the electrografting of poly(2-phenyl-2-(2,2,6,6-tetramethyl-piperidin-1-yloxy)-ethylacrylate) onto stainless steel, followed by the nitroxide-mediated radical polymerization of 2-(dimethylamino ethyl)acrylate and styrene or n-butyl acrylate, initiated from the electrografted polyacrylate chains. The grafted copolymers were quaternized in order to endow them with antibacterial properties. Peeling tests have confirmed the strong adhesion of the grafted copolymer onto the stainless steel substrate. Quartz crystal microbalance experiments have proven that fibrinogen adhesion is lower on the hydrophilic quaternized films compared to the nonionic counterpart. Such quaternized copolymers exhibit significant antibacterial activity against the Gram-positive bacteria S. aureus and the Gram-negative bacteria E. coli.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The modified surface possesses significant antibacterial activities against both Staphylococcus aureus and E. coli.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [129]
In the citing paper
“Ignatova et al. reported a two-step “grafting from” method for preparing antimicrobial stainless steel surfaces by sequential cathodic electrografting of an alkoxyamine-containing acrylate with SI-NMP of styrene and DMAEMA, followed by quaternization of the grafted polymers [129] (Fig. 5).”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [129]
Citations
Cites
(2013) · doi:10.1016/c2009-0-02433-7 · Cited by 5,127
Poly(ethylene glycol) chemistry : biotechnical and biomedical applications
Harris, J. M. (1992) · Plenum Press eBooks · Cited by 1,426
Poly(Ethylene Glycol) Chemistry: Biotechnical and Biomedical Applications
(1992) · Springer eBooks · doi:10.1007/978-1-4899-0703-5 · Cited by 1,420
Buttry, D. A., & Ward, M. D. (1992) · Chemical Reviews · doi:10.1021/cr00014a006 · Cited by 1,375
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Development of a Universal Alkoxyamine for “Living” Free Radical Polymerizations
Benoit, D., Chaplinski, V., Braslau, R., & Hawker, C. J. (1999) · Journal of the American Chemical Society · doi:10.1021/ja984013c · Cited by 1,058
Controlled Synthesis of Polymer Brushes by “Living” Free Radical Polymerization Techniques
Husseman, M., Malmström, E. E., McNamara, M., Mate, M., Mecerreyes, D., Benoit, D. G., Hedrick, J. L., Mansky, P., Huang, E., Russell, T. P., et al. (1999) · Macromolecules · doi:10.1021/ma981290v · Cited by 927
Matyjaszewski, K., Miller, P. J., Shukla, N., Immaraporn, B., Gelman, A., Luokala, B. B., Siclovan, T. M., Kickelbick, G., Vallant, T., Hoffmann, H., et al. (1999) · Macromolecules · doi:10.1021/ma991146p · Cited by 919
Prucker, O., & Rühe, J. (1998) · Macromolecules · doi:10.1021/ma970660x · Cited by 641
McPherson, T., Kidane, A., Szleifer, I., & Park, K. (1998) · Langmuir · doi:10.1021/la9706781 · Cited by 433
Mrksich, M., Chen, C. S., Xia, Y., Dike, L. E., Ingber, D. E., & Whitesides, G. M. (1996) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.93.20.10775 · Cited by 425
Proteins and cells on PEG immobilized silicon surfaces
Zhang, M., Desai, T., & Ferrari, M. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00026-x · Cited by 408
Khang, G., Bang Lee, H., & Ho Lee, J. (2002) · Biomaterials · doi:10.1201/9781420040036.ch3 · Cited by 407
Baum, M., & Brittain, W. J. (2002) · Macromolecules · doi:10.1021/ma0112467 · Cited by 396
Polymeric Thin Films That Resist the Adsorption of Proteins and the Adhesion of Bacteria
Chapman, R. G., Ostuni, E., Liang, M. N., Meluleni, G., Kim, E., Yan, L., Pier, G., Warren, H. S., & Whitesides, G. M. (2001) · Langmuir · doi:10.1021/la001222d · Cited by 356
Antibacterial and Bacterium Adsorbing Macromolecules
Tashiro, T. (2001) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20010201)286:2<63::aid-mame63>3.0.co;2-h · Cited by 345
Delamar, M., Désarmot, G., Fagebaume, O., Hitmi, R., Pinsonc, J., & Savéant, J.-M. (1997) · Carbon · doi:10.1016/s0008-6223(97)00010-9 · Cited by 342
Surface-bonded antimicrobial activity of an organosilicon quaternary ammonium chloride
Isquith, A. J., Abbott, E. A., & Walters, P. A. (1972) · Applied Microbiology · doi:10.1128/aem.24.6.859-863.1972 · Cited by 329
Biochemistry of Antimicrobial Action
Franklin, T. J., & Snow, G. A. (1989) · Springer eBooks · doi:10.1007/978-94-009-0825-3 · Cited by 316
Tsujii, Y., Ejaz, M., Sato, K., Goto, A., & Fukuda, T. (2001) · Macromolecules · doi:10.1021/ma010733j · Cited by 310
Poly(ethylene glycol): Chemistry and Biological Applications
Brannon-Peppas, L. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00212-6 · Cited by 238
Ikeda, T., Tazuke, S., & Suzuki, Y. (1984) · Die Makromolekulare Chemie · doi:10.1002/macp.1984.021850503 · Cited by 173
The role of the bacterial cell envelope in antibiotic resistance
Costerton, J. W., & Cheng, K.-J. (1975) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/1.4.363 · Cited by 145
Study on kinetics of early stage protein adsorption on poly(2-methoxyethylacrylate) (PMEA) surface
Tanaka, M., Mochizuki, A., Shiroya, T., Motomura, T., Shimura, K., Onishi, M., & Okahata, Y. (2002) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)01100-1 · Cited by 98
Algicidal Activity of a Surface-Bonded Organosilicon Quaternary Ammonium Chloride
Walters, P. A., Abbott, E. A., & Isquith, A. J. (1973) · Applied Microbiology · doi:10.1128/am.25.2.253-256.1973 · Cited by 83
Algicidal activity of a surface-bonded organosilicon quaternary ammonium chloride
Walters, P. A., Abbott, E. A., & Isquith, A. J. (1973) · Applied Microbiology · doi:10.1128/aem.25.2.253-256.1973 · Cited by 81
Protein adsorption onto ionic surfaces
Kato, K., Sano, S., & Ikada, Y. (1995) · Colloids and Surfaces B Biointerfaces · doi:10.1016/0927-7765(94)01172-2 · Cited by 80
Ikeda, T., & Tazuke, S. (1983) · Die Makromolekulare Chemie Rapid Communications · doi:10.1002/marc.1983.030040704 · Cited by 68
Fabrication of low-density foam shells from resorcinol-formaldehyde aerogel
Lambert, S. M., Overturf, G. E., Wilemski, G., Letts, S. A., Schroen-Carey, D., & Cook, R. C. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970912)65:11<2165::aid-app13>3.0.co;2-2 · Cited by 61
Disinfection of Water with Quaternary Ammonium Salts Insolubilized on a Porous Glass Surface
Nakagawa, Y., Hayashi, H., Tawaratani, T., Kourai, H., Horie, T., & Shibasaki, I. (1984) · Applied and Environmental Microbiology · doi:10.1128/aem.47.3.513-518.1984 · Cited by 52
Voccia, S., Jérôme, C., Detrembleur, C., Leclère, P., Gouttebaron, R., Hecq, M., Gilbert, B., Lazzaroni, R., & Jérôme, R. (2003) · Chemistry of Materials · doi:10.1021/cm0207705 · Cited by 44
Self-citationClaes, M., Voccia, S., Detrembleur, C., Jérôme, C., Gilbert, B., Leclère, P. E. L. G., Gueskine, V., Gouttebaron, R., Hecq, M., Lazzaroni, R., et al. (2003) · Macromolecules · doi:10.1021/ma0217130 · Cited by 37
Self-citationAdhesion of different bacterial strains to low-temperature plasma-treated sutures
Rad, A. Y., Ayhan, H., & Pi?kin, E. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19980905)41:3<349::aid-jbm2>3.0.co;2-c · Cited by 29
Solvent effect on the electrografting of acrylonitrile on nickel
Mertens, M., Calberg, C., Baute, N., Jérôme, R., & Martinot, L. (1998) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(97)00442-7 · Cited by 25
Self-citationANDERS, C., GÄRTNER, R., Steinert, V., Voit, B. I., & Zschoche, S. (1999) · Journal of Macromolecular Science Part A · doi:10.1080/10601329908951197 · Cited by 16
ANDERS, C., GÄRTNER, R., Steinert, V., et al. (1999) · Journal of Macromolecular Science Part A · doi:10.1081/ma-100101580 · Cited by 8
Antiseptics, antibiotics and the cell membrane
Franklin, T. J., & Snow, G. A. (1998) · Springer eBooks · doi:10.1007/978-1-4757-4599-3_3 · Cited by 2
Research works printed but not linked: 7
- Mrksich M., 1997, Poly(Ethylene Glycol): Chemistry and Biological Applications
- Isquith A. J., 1972, Appl. Microbiol., 24, 859, 10.1128/am.24.6.859-863.1972 · doi:10.1128/am.24.6.859-863.1972 · Paper page
- Moller M., 2001, Part A: Polym. Chem
- Yuan W., 1993, Trends Polym. Sci., 1, 388
- Kanazawa A., 1993, Part A: Polym. Chem
- Hugo, W. B.; Russell, A. D.Pharmaceutical Microbiology; Blackwell (Oxford): Oxford, U.K., 1980; p 3.
- Li G., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 175
Cited by
Barbey, R., Lavanant, L., Paripovic, D., Schüwer, N., Sugnaux, C., Tugulu, S., & Klok, H.-A. (2009) · Chemical Reviews · doi:10.1021/cr900045a · Cited by 1,753
Responsive polymers in controlled drug delivery
Bajpai, A. K., Shukla, S. K., Bhanu, S., & Kankane, S. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.005 · Cited by 1,391
Nitroxide-mediated polymerization
Nicolas, J., Guillaneuf, Y., Lefay, C., Bertin, D., Gigmes, D., & Charleux, B. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.002 · Cited by 1,380
Electrografting: a powerful method for surface modification
Bélanger, D., & Pinson, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00149j · Cited by 1,108
Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00314 · Cited by 1,046
Metadata
- Authors
- Ignatova, M., Voccia, S., Gilbert, B., Markova, N., Mercuri, P. S., Galleni, M., Sciannamea, V., Lenoir, S., Cossement, D., Gouttebaron, R., Jérôme, R., & Jérôme, C.
- Affiliations
- University of Liège (BE)
- Center for Education and Research on Macromolecules (CERM), University of Liège, Sart-Tilman, B6, B-4000 Liège, Belgium, Laboratory of Analytical Chemistry and Electrochemistry, University of Liège, Sart-Tilman, B6, B-4000 Liège, Belgium, Institute of Microbiology, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria, Biological Macromolecules, Center for Protein Engineering, University of Liège, Sart-Tilman, B6, B-4000 Liège, Belgium, and Service de Chimie Inorganique et Analytique LASSIE, University of...
- Corresponding author
- Jérôme, Christine
- ORCID
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-29
- Volume
- 20
- Issue
- 24
- Pages
- 10718-10726
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2059727429
- Cited by
- 95
- References
- 34
- Citations by year
- 2023: 1 · 2022: 2 · 2021: 3 · 2020: 6 · 2019: 5 · 2018: 1 · 2017: 5 · 2016: 3 · 2015: 6 · 2014: 7 · 2013: 5 · 2012: 7
- FWCI
- 2.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- ORBi (University of Liège) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Keywords
- copolymer brushes, stainless steel surfaces, antibacterial coatings, nitroxide-mediated polymerization, electrografting, styrene, butyl acrylate, quaternization, fibrinogen adhesion, Staphylococcus aureus, Escherichia coli, surface adhesion
- MeSH terms
- Acrylates, Adhesiveness, Adhesives, Anti-Bacterial Agents, Escherichia coli, Methylamines, Microbial Sensitivity Tests, Nitrogen Oxides, Piperidines, Stainless Steel, Staphylococcus aureus, Surface Properties, Molecular Structure, Styrene
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.