Achieving Highly Effective Nonfouling Performance for Surface-Grafted Poly(HPMA) via Atom-Transfer Radical Polymerization
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
Human blood plasma and serum pose significant challenges to implanted devices because of highly unfavorable nonspecific protein adsorption on the surface. In this work, we introduce an improved two-step method to immobilize initiator thiols on a gold substrate for the surface-initiated atom-transfer radical polymerization (SI-ATRP) of hydroxypropyl methacrylate (HPMA). We investigate protein adsorption from a single-protein solution, diluted (10%) and undiluted (100%) human blood plasma, and serum on the poly(HPMA) brushes with different film thicknesses using surface plasmon resonance (SPR) sensors. SPR results show a correlation between antifouling properties and film thickness; that is, the poly(HPMA) brushes exhibit high protein resistance at medium film thicknesses of ∼25-40 nm (e.g. <0.3 ng/cm(2) for single-protein adsorption and 10% human blood plasma and serum, ∼24.5 ng/cm(2) for 100% human serum, and ∼52.8 ng/cm(2) for 100% human plasma at a thickness of ∼29 nm). With an optimal film thickness and surface roughness, the poly(HPMA) brush also demonstrates its high resistance to fibroblast adhesion. This work provides an alternative surface polymerization approach to preparing effective antifouling poly(HPMA) materials for potential applications in blood-contacting medical devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Several other hydrophilic polymers such as PDMA, HPMA, and other zwitterionic polymers have been reported as anti-fouling macromolecules [100–102].”
From Polymeric micelles for the delivery of poorly soluble drugs: From nanoformulation to clinical approval. (2020) · cites this paper as [100]
Citations
Cites
Jiang, S., & Cao, Z. (2010) · Advanced Materials · doi:10.1002/adma.200901407 · Cited by 2,027
Biomaterials: Where We Have Been and Where We Are Going
Ratner, B. D., & Bryant, S. J. (2004) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.6.040803.140027 · Cited by 1,507
Ladd, J., Zhang, Z., Chen, S., Hower, J. C., & Jiang, S. (2008) · Biomacromolecules · doi:10.1021/bm701301s · Cited by 808
Inhibition of bacterial adhesion and biofilm formation on zwitterionic surfaces
Cheng, G., Zhang, Z., Chen, S., Bryers, J. D., & Jiang, S. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.041 · Cited by 729
Ma, H., Hyun, J., Stiller, P., & Chilkoti, A. (2004) · Advanced Materials · doi:10.1002/adma.200305830 · Cited by 680
Mussel Adhesive Protein Mimetic Polymers for the Preparation of Nonfouling Surfaces
Dalsin, J. L., Hu, B.-H., Lee, B. P., & Messersmith, P. B. (2003) · Journal of the American Chemical Society · doi:10.1021/ja0284963 · Cited by 585
Ostuni, E., Chapman, R. G., Liang, M. N., Meluleni, G., Pier, G., Ingber, D. E., & Whitesides, G. M. (2001) · Langmuir · doi:10.1021/la010552a · Cited by 563
Zhang, Z., Chen, S., Chang, Y., & Jiang, S. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp057266i · Cited by 539
Li, L., Chen, S., Zheng, J., Ratner, B. D., & Jiang, S. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0473321 · Cited by 513
Self-citationZhang, Z., Chen, S., & Jiang, S. (2006) · Biomacromolecules · doi:10.1021/bm060750m · Cited by 473
Research works printed but not linked: 1
- Otsuka H., 2006, Trans. Mater. Res. Soc. Jpn., 31, 627
Cited by
Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00314 · Cited by 1,046
Hwang, D., Ramsey, J. D., & Kabanov, A. V. (2020) · Advanced drug delivery reviews · doi:10.1016/j.addr.2020.09.009 · Cited by 699
Krishnamoorthy, M., Hakobyan, S., Ramstedt, M., & Gautrot, J. E. (2014) · Chemical Reviews · doi:10.1021/cr500252u · Cited by 604
Structures and Synthesis of Zwitterionic Polymers
Laschewsky, A. (2014) · Polymers · doi:10.3390/polym6051544 · Cited by 440
“A particularly fertile aspect of the evolving RDRP methods for polyzwitterions has been the possibility to control “grafting-from” processes on surfaces [33,35,129,165,186,187,195,199,202,250–303].”
MethodStimulus-responsive polymeric nanogels as smart drug delivery systems
Hajebi, S., Rabiee, N., Bagherzadeh, M., Ahmadi, S., Rabiee, M., Roghani-Mamaqani, H., Tahriri, M., Tayebi, L., & Hamblin, M. R. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.018 · Cited by 424
Biocompatible and Bioactive Surface Modifications for Prolonged In Vivo Efficacy
Meyers, S. R., & Grinstaff, M. W. (2012) · Chemical Reviews · doi:10.1021/cr2000916 · Cited by 294
Surface chemistry to minimize fouling from blood-based fluids
Blaszykowski, C., Sheikh, S., & Thompson, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35170f · Cited by 271
Olivier, A., Meyer, F., Raquez, J.-M., Damman, P., & Dubois, P. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.002 · Cited by 246
Antibacterial coatings on orthopedic implants
Chen, X., Zhou, J., Qian, Y., & Zhao, L. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100586 · Cited by 246
“methacrylate (PHPMA) [79], polyhydroxyethyl”
Schubert, J., & Chanana, M. (2018) · Current Medicinal Chemistry · doi:10.2174/0929867325666180601101859 · Cited by 232
Zhao, C., Li, L., Wang, Q., Yu, Q., & Zheng, J. (2011) · Langmuir · doi:10.1021/la200061h · Cited by 214
Self-citationBinding characteristics between polyethylene glycol (PEG) and proteins in aqueous solution
Wu, J., Zhao, C., Lin, W., Hu, R., Wang, Q., Chen, H., Li, L., Chen, S., & Zheng, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00253a · Cited by 214
Self-citationRodriguez‐Emmenegger, C., Brynda, E., Riedel, T., Houska, M., Šubr, V., Alles, A. B., Hasan, E., Gautrot, J. E., & Huck, W. T. S. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100189 · Cited by 208
Brushing up functional materials
Ma, S., Zhang, X., Yu, B., & Zhou, F. (2019) · NPG Asia Materials · doi:10.1038/s41427-019-0121-2 · Cited by 199
Polymeric Nanoparticles with Neglectable Protein Corona
Alberg, I., Kramer, S., Schinnerer, M., Hu, Q., Seidl, C., Leps, C., Drude, N., Möckel, D., Rijcken, C., Lammers, T., et al. (2020) · Small · doi:10.1002/smll.201907574 · Cited by 173
Vaisocherová, H., Brynda, E., & Homola, J. (2015) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-015-8606-5 · Cited by 161
Amino Acid-Based Zwitterionic Poly(serine methacrylate) as an Antifouling Material
Liu, Q., Singh, A., & Liu, L. (2013) · Biomacromolecules · doi:10.1021/bm301646y · Cited by 159
Stable Protein-Repellent Zwitterionic Polymer Brushes Grafted from Silicon Nitride
Nguyen, A. T., Baggerman, J., Paulusse, J. M. J., van Rijn, C. J. M., & Zuilhof, H. T. (2011) · Langmuir · doi:10.1021/la104657c · Cited by 143
Kim, M., Schmitt, S. K., Choi, J. W., Krutty, J. D., & Gopalan, P. (2015) · Polymers · doi:10.3390/polym7071346 · Cited by 153
“(b) Protein adsorption as a function of both polymerization time and film thickness of P(HMPA) surfaces measured by SPR (Reproduced with permission from Reference [171].”
BackgroundMethodRatcliffe, L. P. D., Ryan, A. J., & Armes, S. P. (2013) · Macromolecules · doi:10.1021/ma301909w · Cited by 122
Synthesis and Characterization of Poly(N-hydroxyethylacrylamide) for Long-Term Antifouling Ability
Zhao, C., & Zheng, J. (2011) · Biomacromolecules · doi:10.1021/bm2011455 · Cited by 120
Self-citationAdvances in Nonfouling Materials: Perspectives for the Food Industry
Mérian, T., & Goddard, J. M. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf204741p · Cited by 118
Polymer brushes: Synthesis, characterization, properties and applications
Bhayo, A. M., Yang, Y., & He, X. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101000 · Cited by 126
Chen, H., Zhao, C., Zhang, M., Chen, Q., Ma, J., & Zheng, J. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b00386 · Cited by 109
Self-citationZhao, C., Li, X., Li, L., Cheng, G., Gong, X., & Zheng, J. (2013) · Langmuir · doi:10.1021/la304511s · Cited by 102
Self-citationZhao, C., Chen, Q., Patel, K., Li, L., Li, X., Wang, Q., Zhang, G., & Zheng, J. (2012) · Soft Matter · doi:10.1039/c2sm25861g · Cited by 99
Self-citationMechanically strong hybrid double network hydrogels with antifouling properties
Chen, H., Chen, Q., Hu, R., Wang, H., Newby, B. Z., Chang, Y., & Zheng, J. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00681c · Cited by 97
Self-citationProbing structure–antifouling activity relationships of polyacrylamides and polyacrylates
Zhao, C., Zhao, J. W., Li, X., Wu, J., Chen, S., Chen, Q., Wang, Q., Gong, X., Li, L., & Zheng, J. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.03.028 · Cited by 102
Self-citationChen, H., Yang, J., Xiao, S., Hu, R., Bhaway, S. M., Vogt, B. D., Zhang, M., Chen, Q., Ma, J., Chang, Y., et al. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.03.009 · Cited by 97
Self-citationNanoparticles in the Biological Context: Surface Morphology and Protein Corona Formation
Richtering, W. H., Alberg, I., & Zentel, R. (2020) · Small · doi:10.1002/smll.202002162 · Cited by 91
Probing the weak interaction of proteins with neutral and zwitterionic antifouling polymers
Wu, J., Zhao, C., Hu, R., Lin, W., Wang, Q., Zhao, J. W., Bilinovich, S. M., Leeper, T. C., Li, L., Cheung, H. M., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.09.038 · Cited by 94
“Such surface interactions between proteins and modified polymer surfaces strongly depend on surface packing properties (density, roughness and thickness) [9,15,18–23].”
Self-citationPolymer brushes for antibiofouling and lubrication
Yang, W., & Zhou, F. (2017) · Biosurface and Biotribology · doi:10.1016/j.bsbt.2017.10.001 · Cited by 85
Recent Advances in Antifouling Surface Polymer Brushes
Xu, X., Chang, Y.-X., Gong, Y., Zhang, Y., Yu, Y., Peng, H., & Fu, C. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02150 · Cited by 88
A survey of state-of-the-art surface chemistries to minimize fouling from human and animal biofluids
Blaszykowski, C., Sheikh, S., & Thompson, M. E. (2015) · Biomaterials Science · doi:10.1039/c5bm00085h · Cited by 83
Synthesis of non-fouling poly[N-(2-hydroxypropyl)methacrylamide] brushes by photoinduced SET-LRP
Vorobii, M., Pereira, A. D. L. S., Pop‐Georgievski, O., Kostina, N. Y., Rodriguez‐Emmenegger, C., & Percec, V. (2015) · Polymer Chemistry · doi:10.1039/c5py00506j · Cited by 79
Gam‐Derouich, S., Gosecka, M., Lépinay, S., Turmine, M., Carbonnier, B., Basińska, T., Słomkowski, S., Millot, M., Othmane, A., Hassen‐Chehimi, D. B., et al. (2011) · Langmuir · doi:10.1021/la200290k · Cited by 78
Biodegradable Nanofibrous Temperature‐Responsive Gelling Microspheres for Heart Regeneration
Zhao, C., Tian, S., Liu, Q., Xiu, K., Lei, I., Wang, Z., & Ma, P. X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000776 · Cited by 78
Self-citationAtom transfer radical polymerization of hydrophilic monomers and its applications
He, W., Jiang, H., Zhang, L., Cheng, Z., & Zhu, X. (2013) · Polymer Chemistry · doi:10.1039/c3py00122a · Cited by 84
Liu, L., Li, W., & Liu, Q. (2014) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1278 · Cited by 88
Antifouling Polymer Coatings for Bioactive Surfaces
He, Y., Wang, Y., Yao, L., Wang, J., & Chen, H. (2025) · Langmuir · doi:10.1021/acs.langmuir.4c04859 · Cited by 76
Wu, H., Tan, L., Tang, Z.-W., Yang, M., Xiao, J.-Y., Liu, C., & Zhuo, R. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01210 · Cited by 69
Chen, H., Zhang, M., Yang, J., Zhao, C., Hu, R., Chen, Q., Chang, Y., & Zheng, J. (2014) · Langmuir · doi:10.1021/la502136q · Cited by 71
“could still kinetically trap approaching proteins in its heterogeneous valleys.(40) 52”
Self-citationRodda, A. E., Meagher, L., Nisbet, D. R., & Forsythe, J. S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.006 · Cited by 68
“These materials commonly include PEGs [9], polyacrylamide [57,58], polyglycerol [59], poly(hydroxypropyl methacrylamide/methacrylate) [60,61], poly(N-vinyl pyrollidone) [62], or polymers which contain zwitterionic groups such as phosphorylcholines and carboxy- or sulfobetaines [17,63–65].”
BackgroundTijunelyte, I., Babinot, J., Guerrouache, M., Valinčius, G., & Carbonnier, B. (2011) · Polymer · doi:10.1016/j.polymer.2011.11.014 · Cited by 61
Functional polymer thin films designed for antifouling materials and biosensors
Zhao, C., Li, L., Guo, M., & Zheng, J. (2012) · Chemical Papers · doi:10.2478/s11696-012-0147-1 · Cited by 64
“…poly(HEMA), and poly(HEAA) brushes exhibit almost undetectable protein adsorption (< 0.3 ng cm−2) from single-protein solutions of lysozyme, fibrinogen, and BSA or 10 % diluted human blood plasma and serum, showing little dependence on film thickness (Zhao & Zheng, 2010, 2011; Zhao et al., 2011).”
BackgroundInfluentialSelf-citationYang, J., Zhang, M., Chen, H., Chang, Y., Chen, Z., & Zheng, J. (2014) · Biomacromolecules · doi:10.1021/bm500598a · Cited by 59
Self-citationGeneric Top-Functionalization of Patterned Antifouling Zwitterionic Polymers on Indium Tin Oxide
Li, Y., Giesbers, M., Gerth, M., & Zuilhof, H. T. (2012) · Langmuir · doi:10.1021/la3022563 · Cited by 58
Use of pooled blood plasmas in the assessment of fouling resistance
Pereira, A. D. L. S., Rodriguez‐Emmenegger, C., Surman, F., Riedel, T., Alles, A. B., & Brynda, E. (2013) · RSC Advances · doi:10.1039/c3ra43093f · Cited by 57
Kotlarek, D., Curti, F., Vorobii, M., Corradini, R., Careri, M., Knoll, W., Rodriguez‐Emmenegger, C., & Dostálek, J. (2020) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2020.128380 · Cited by 55
On the hydration of subnanometric antifouling organosilane adlayers: A molecular dynamics simulation
Sheikh, S., Blaszykowski, C., Nolan, R., Thompson, D., & Thompson, M. E. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.09.025 · Cited by 48
Gam‐Derouich, S., Lamouri, A., Redeuilh, C., Decorse, P., Maurel, F., Carbonnier, B., Beyazıt, S., Yılmaz, G., Yağcı, Y., & Chehimi, M. M. (2012) · Langmuir · doi:10.1021/la300690d · Cited by 48
Antifouling strategies for protecting bioelectronic devices
Chen, X., & Noy, A. (2021) · APL Materials · doi:10.1063/5.0029994 · Cited by 48
Water-mediated crystallohydrate–polymer composite as a phase-change electrolyte
Tai, Z., Wei, J., Zhou, J., Liao, Y., Wu, C., Shang, Y., Wang, B., & Wang, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-15415-5 · Cited by 45
Amino acid-based zwitterionic polymers: antifouling properties and low cytotoxicity
Li, W., Liu, Q., & Liu, L. (2014) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2014.948332 · Cited by 44
“8 ng/cm(2) from plasma.[30] Another important criterion for antifouling materials is their ability to resist bacterial adhesion.”
BackgroundYu, K., Lai, B., & Kizhakkedathu, J. N. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201100042 · Cited by 45
Antifouling and biodegradable poly(N-hydroxyethyl acrylamide) (polyHEAA)-based nanogels
Zhao, C., Patel, K., Aichinger, L. M., Liu, Z., Hu, R., Chen, H., Li, X., Li, L., Zhang, G., Chang, Y., et al. (2013) · RSC Advances · doi:10.1039/c3ra42323a · Cited by 42
Self-citationPerspectives on Theoretical Models and Molecular Simulations of Polymer Brushes
Tang, Y., Liu, Y., Zhang, D., & Zheng, J. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c03253 · Cited by 40
Self-citationPhotoreactive Initiator for Surface-Initiated ATRP on Versatile Polymeric Substrates
Fukazawa, K., Nakao, A., Maeda, M., & Ishihara, K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07145 · Cited by 37
Synthesis and Characterization of Ultralow Fouling Poly(N-acryloyl-glycinamide) Brushes
Yang, F., Liu, Y., Zhang, Y., Ren, B., Xu, J., & Zheng, J. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b03435 · Cited by 36
Self-citationControlled adhesion of Salmonella Typhimurium to poly(oligoethylene glycol methacrylate) grafts
Mrabet, B., Mejbri, A., Mahouche‐Chergui, S., Gam‐Derouich, S., Turmine, M., Mechouet, M., Lang, P., Bakala, H., Ladjimi, M. M., Bakhrouf, A., et al. (2011) · Surface and Interface Analysis · doi:10.1002/sia.3741 · Cited by 35
Lazarin, A. A., Zamperini, C. A., Vergani, C. E., Wady, A. F., Giampaolo, E. T., & Machado, A. L. (2012) · Gerodontology · doi:10.1111/j.1741-2358.2012.00688.x · Cited by 33
Yang, J., Zhao, C., Hsieh, I., Subramanian, S., Liu, L., Cheng, G., Li, L., Cheng, S. Z. D., & Zheng, J. (2011) · Polymer International · doi:10.1002/pi.3220 · Cited by 30
Self-citationIzumida, F. E., Moffa, E. B., Vergani, C. E., Machado, A. L., Jorge, J. H., & Giampaolo, E. T. (2014) · Biofouling · doi:10.1080/08927014.2014.894028 · Cited by 28
“2013), such as polyvinylpyrralidone, polyacrylamide, poly(ethylene glycol) (PEG), parylene, and hydroxypropyl methacrylate (HPMA), have been evaluated to modify the biomaterial surface and reduce protein adsorption and microbial adherence (Ishihara et al. 1998; Çagavi et al. 2004; Cringus-Fundeanu et al. 2007; Zhao et…”
BackgroundInfluentialStetsyshyn, Y., Raczkowska, J., Budkowski, A., Kostruba, A. M., Harhay, K., Ohar, H., Awsiuk, K., Bernasik, A., Ripak, N., & Zemła, J. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b02285 · Cited by 27
Polyurethanes containing zwitterionic sulfobetaines and their molecular chain rearrangement in water
Cao, J., Yang, M., Lu, A., Zhai, S., Chen, Y., & Luo, X. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34384 · Cited by 25
Kuliasha, C. A., Fedderwitz, R. L., Calvo, P. R., Sumerlin, B. S., & Brennan, A. B. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02575 · Cited by 24
Molecular Dynamics Study of the Antifouling Mechanism of Hydrophilic Polymer Brushes
Yagasaki, T., & Matubayasi, N. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c01552 · Cited by 22
Antifouling performance of nano-sized spherical poly(N-hydroxyethyl acrylamide) brush
Qin, X., Chen, K., Cao, L., Zhang, Y., Li, L., & Guo, X. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.04.048 · Cited by 22
Self-citationEffect of Core‐Crosslinking on Protein Corona Formation on Polymeric Micelles
Alberg, I., Kramer, S., Leps, C., Tenzer, S., & Zentel, R. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202000414 · Cited by 20
Nunvářová, K., Charvátová, B., Šlouf, M., Hermanová, S., & Merna, J. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.029 · Cited by 19
Chernyy, S., Iruthayaraj, J., Ceccato, M., Hinge, M., Pedersen, S. U., & Daasbjerg, K. (2012) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26253 · Cited by 18
Polymer‐Grafted Modification of Activated Carbon by Surface‐Initiated AGET ATRP
Liu, Y., Miao, X., Zhu, J., Zhang, Z., Cheng, Z., & Zhu, X. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100668 · Cited by 18
Li, Z., Köwitsch, A., Zhou, G., Groth, T., Fuhrmann, B., Niepel, M. S., Amado, E., & Kreßler, J. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200402 · Cited by 17
Functionalized Antifouling Polymer Brushes for Biospecific Surfaces
Postma, E. J., Scheres, L., de Beer, S., Kuzmyn, A. R., & Zuilhof, H. T. (2025) · Advanced Materials Interfaces · doi:10.1002/admi.202400955 · Cited by 15
Pavli, P., Petrou, P. S., Douvas, A. M., Dimotikali, D., Kakabakos, S. E., & Argitis, P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5053224 · Cited by 15
Kang, H.-G., An, S., Lee, W. J., Kang, G. R., Kim, S., Hur, S., Paeng, K., & Kim, M. (2018) · RSC Advances · doi:10.1039/c8ra04480e · Cited by 14
Abdul‐Karim, R., Kroneková, Z., Pippig, F., Popelka, A., Mičušík, M., Kleinová, A., Pathiwada, D., Kasák, P., & Mosnáček, J. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112900 · Cited by 13
Ren, B., Tang, Y., Zhang, D., Liu, Y., Zhang, Y., Chen, H., Hu, R., Zhang, M., & Zheng, J. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb02775a · Cited by 13
Self-citationHigh Antifouling Performance of Weakly Hydrophilic Polymer Brushes: A Molecular Dynamics Study
Yagasaki, T., & Matubayasi, N. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c01365 · Cited by 11
Li, J. S., Kwiatkowska, B., Lü, H., Voglstätter, M., Ueda, E., Grunze, M., Sleeman, J. P., Levkin, P. A., & Nazarenko, I. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11338 · Cited by 11
Wang, S., Li, D., Chen, H., Wu, Z., Xu, Y., & Brash, J. L. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.706470 · Cited by 11
“It is believed that the water associated with hydrophilic polymers such as poly(HEMA) is strongly related to their resistance to protein adsorption [24,25].”
BackgroundKoubková, J. (., Macková, H., Proks, V., Trchová, M., Brus, J., & Horák, D. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27681 · Cited by 11
Yagasaki, T., & Matubayasi, N. (2022) · Physical Chemistry Chemical Physics · doi:10.1039/d2cp03112d · Cited by 10
Yu, L. D., Shi, Z., Gao, L., & Li, C. M. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35432 · Cited by 10
“Among them, surface-initiated atom-transfer radical polymerization (SI-ATRP) has been proved to be effective in producing nonfouling and bioactive surface.(23,24) Wu et al.”
BackgroundAtom‐Transfer Radical Polymerisation (ATRP) as a Tool for the Development of Optical Sensing Phases
Marín‐Suárez, M., Medina-Castillo, A. L., Fernández-Sánchez, J. F., & Fernández‐Gutiérrez, A. (2012) · Israel Journal of Chemistry · doi:10.1002/ijch.201100123 · Cited by 6
Gołasz, P., Płoska, A., Korniienko, V. V., Diedkova, K., Varava, Y., Zieliński, R., Pogorielov, M., & Simka, W. (2025) · Materials · doi:10.3390/ma18020349 · Cited by 6
“Some commonly used hydrophilic coatings are hyaluronic acid (HA) [32], sodium alginate [33], PEG and its derivatives [34,35], and polyhydroxypropyl methacrylate (PHPMA) [36] to name just a few.”
Polyacrylamide: Evaluation of Ultralow Fouling Properties of a Traditional Material
Liu, L., Liu, Q., & Singh, A. (2012) · ACS symposium series · doi:10.1021/bk-2012-1120.ch030 · Cited by 5
Mercan, E. S., & Karaman, M. (2021) · Journal of Coatings Technology and Research · doi:10.1007/s11998-021-00486-w · Cited by 5
Postma, E. J., Kuzmyn, A. R., Schroën, K. G. P. H., & de Beer, S. (2026) · Advanced Materials Interfaces · doi:10.1002/admi.202501028 · Cited by 4
“This respective fouling reduction of 65 % and 84 % is in agreement with literature, which typically shows a decrease in fouling up to dry thicknesses of 20 nm for such brushes [10, 29, 57–59].”
Water-mediated phase-change composite electrolyte
Liu, M., & Han, B. (2020) · Green Energy & Environment · doi:10.1016/j.gee.2020.07.003 · Cited by 4
Boncler, M. A. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300052 · Cited by 4
Shimizu, K., Blaikie, F. H., Kongsfelt, M. S., Sørensen, K. D. S., Pedersen, S. U., & Daasbjerg, K. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27893 · Cited by 3
(2016) · Royal Society of Chemistry eBooks · doi:10.1039/9781782622048-00184 · Cited by 2
Englert, J., Palà, M., Quandt, J., Sieben, H., Grottke, O., Marx, B., Lligadas, G., & Rodriguez‐Emmenegger, C. (2025) · Advanced Materials Interfaces · doi:10.1002/admi.202500122 · Cited by 1
Enhanced PVDF membrane antifouling performance via surface modification by functional polymers
Zhao, G. (2017) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/69492
Functionalized Surfaces: Biomolecular Surface Modification with Functional Polymers
Gall, F. B., & Ross, A. M. (2017) · CRC Press eBooks · doi:10.1081/e-ebppc-120051690
Chemical Aspects of Biocompatible Interfaces
Vullev, V. I., & Nuñez, V. (2015) · CRC Press eBooks · doi:10.1081/e-escs3-120051159
Functionalized Surfaces: Biomolecular Surface Modification with Functional Polymers
Gall, F. B., & Ross, A. M. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120051690
Singh, M., Sedláková, Z., Svoboda, J., Jäger, E., & Poręba, R. (2025) · Advanced Materials Interfaces · doi:10.1002/admi.202500196
Neimark, A. V., & Santo, K. P. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-13665-8.00011-1
Metadata
- Authors
- Zhao, C., Li, L., & Zheng, J.
- Affiliations
- University of Akron (US)
- Corresponding author
- Zheng, Jie
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-10-13
- Volume
- 26
- Issue
- 22
- Pages
- 17375-17382
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2036289383
- Cited by
- 100
- References
- 40
- Citations by year
- 2026: 1 · 2025: 6 · 2024: 2 · 2023: 5 · 2022: 2 · 2021: 4 · 2020: 7 · 2019: 3 · 2018: 3 · 2017: 6 · 2016: 6 · 2015: 11 · 2014: 10 · 2013: 9 · 2012: 15
- FWCI
- 5.45
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Engineering › Ocean Engineering › Marine Biology and Environmental Chemistry
- Keywords
- 2-hydroxypropyl methacrylate, surface-initiated atom transfer radical polymerization, non-fouling surfaces, protein adsorption, blood plasma, human serum, gold substrate, polymer brushes, film thickness, surface roughness, fibroblast adhesion, blood-contacting devices, antifouling coatings
- MeSH terms
- Acrylamides, Adsorption, Animals, Cattle, Cell Adhesion, Free Radicals, Humans, Methacrylates, Proteins, Surface Properties, NIH 3T3 Cells, Mice, Biofouling, Polymerization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.