Nanoscale Interfacial Friction and Adhesion on Supported versus Suspended Monolayer and Multilayer Graphene
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Using atomic force microscopy (AFM), supported by semicontinuum numerical simulations, we determine the effect of tip-subsurface van der Waals interactions on nanoscale friction and adhesion for suspended and silicon dioxide supported graphene of varying thickness. While pull-off force measurements reveal no layer number dependence for supported graphene, suspended graphene exhibits an increase in pull-off force with thickness. Further, at low applied loads, friction increases with increasing number of layers for suspended graphene, in contrast to reported trends for supported graphene. We attribute these results to a competition between local forces that determine the deformation of the surface layer, the profile of the membrane as a whole, and van der Waals forces between the AFM tip and subsurface layers. We find that friction on supported monolayer graphene can be fit using generalized continuum mechanics models, from which we extract the work of adhesion and interfacial shear strength. In addition, we show that tip-sample adhesive forces depend on interactions with subsurface material and increase in the presence of a supporting substrate or additional graphene layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Narrow graphene nanoribbons from carbon nanotubes
Jiao, L., Zhang, L., Wang, X., Diankov, G., & Dai, H. (2009) · Nature · doi:10.1038/nature07919 · Cited by 2,441
Mechanical Properties of Monolayer Graphene Oxide
Suk, J. W., Piner, R. D., An, J., & Ruoff, R. S. (2010) · ACS Nano · doi:10.1021/nn101781v · Cited by 1,194
Israelachvili, J. N. (2011) · Intermolecular and Surface Forces · doi:10.1016/b978-0-12-391927-4.10001-5 · Cited by 511
Lateral force calibration of an atomic force microscope with a diamagnetic levitation spring system
Li, Q., Kim, K.-S., & Rydberg, A. (2006) · Review of Scientific Instruments · doi:10.1063/1.2209953 · Cited by 208
Cited by
A review on mechanics and mechanical properties of 2D materials—Graphene and beyond
Akinwande, D., Brennan, C. J., Bunch, J. S., Egberts, P., Felts, J. R., Gao, H., Huang, R., Kim, J.-S., Li, T., Li, Y., et al. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.01.008 · Cited by 1,342
Self-citationThe evolving quality of frictional contact with graphene
Li, S., Li, Q., Carpick, R. W., Gumbsch, P., Liu, X. Z., Ding, X., Sun, J., & Li, J. (2016) · Nature · doi:10.1038/nature20135 · Cited by 541
Approaches for Achieving Superlubricity in Two-Dimensional Materials
Berman, D., Erdemir, A., & Sumant, A. V. (2018) · ACS Nano · doi:10.1021/acsnano.7b09046 · Cited by 541
Tribology of two-dimensional materials: From mechanisms to modulating strategies
Zhang, S., Ma, T., Erdemir, A., & Li, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.12.002 · Cited by 407
Fundamental Aspects of Energy Dissipation in Friction
Park, J. Y., & Salmeron, M. (2014) · Chemical Reviews · doi:10.1021/cr200431y · Cited by 272
Metadata
- Authors
- Deng, Z., Klimov, N. N., Solares, S. D., Li, T., Xu, H., & Cannara, R. J.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-12-18
- Volume
- 29
- Issue
- 1
- Pages
- 235-243
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2329512807
- Cited by
- 129
- References
- 4
- FWCI
- 4.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nanoscale Interfacial Friction and Adhesion on Supported versus Suspended Monolayer and Multilayer Graphene. https://app.cochat.ai/papers/10.1021/la304079a
- The paper
- Deng, Z., Klimov, N. N., Solares, S. D., Li, T., Xu, H., & Cannara, R. J. (2013). Nanoscale Interfacial Friction and Adhesion on Supported versus Suspended Monolayer and Multilayer Graphene. Langmuir. https://doi.org/10.1021/la304079a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.