The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Gas Adsorption and Storage in Metal−Organic Framework MOF-177
Abstract
Gas adsorption experiments have been carried out on a zinc benzenetribenzoate metal-organic framework material, MOF-177. Hydrogen adsorption on MOF-177 at 298 K and 10 MPa gives an adsorption capacity of approximately 0.62 wt %, which is among the highest hydrogen storage capacities reported in porous materials at ambient temperatures. The heats of adsorption for H2 on MOF-177 were -11.3 to -5.8 kJ/mol. By adding a H2 dissociating catalyst and using our bridge building technique to build carbon bridges for hydrogen spillover, the hydrogen adsorption capacity in MOF-177 was enhanced by a factor of approximately 2.5, to 1.5 wt % at 298 K and 10 MPa, and the adsorption was reversible. N2 and O2 adsorption measurements showed that O2 was adsorbed more favorably than N2 on MOF-177 with a selectivity of approximately 1.8 at 1 atm and 298 K, which makes MOF-177 a promising candidate for air separation. The isotherm was linear for O2 while being concave for N2. Water vapor adsorption studies indicated that MOF-177 adsorbed up to approximately 10 wt % H2O at 298 K. The framework structure of MOF-177 was not stable upon H2O adsorption, which decomposed after exposure to ambient air in 3 days. All the results suggested that MOF-177 could be a potentially promising material for gas separation and storage applications at ambient temperature (under dry conditions or with predrying).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Self-citation
Cited by
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Hydrogen storage in metal–organic frameworks
Murray, L. J., Dincă, M., & Long, J. R. (2009) · Chemical Society Reviews · doi:10.1039/b802256a · Cited by 4,532
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Yusuf, V. F., Malek, N. I., & Kailasa, S. K. (2022) · ACS Omega · doi:10.1021/acsomega.2c05310 · Cited by 894
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Hydrogen storage in metal–organic frameworks
Collins, D. J., & Zhou, H.-C. (2007) · Journal of Materials Chemistry · doi:10.1039/b702858j · Cited by 720
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Han, S. S., Mendoza-Cortés, J. L., & Goddard III, W. A. (2009) · Chemical Society Reviews · doi:10.1039/b802430h · Cited by 594
Nguyen, J. G., & Cohen, S. M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100900c · Cited by 571
Bloch, E. D., Murray, L. J., Queen, W. L., Chavan, S., Maximoff, S. N., Bigi, J. P., Krishna, R., Peterson, V. K., Grandjean, F., Long, G. J., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja205976v · Cited by 531
Song, J., Zhang, Z., Hu, S., Wu, T., Jiang, T., & Han, B. (2009) · Green Chemistry · doi:10.1039/b902550b · Cited by 484
Metal organic frameworks mimicking natural enzymes: a structural and functional analogy
Nath, I., Chakraborty, J., & Verpoort, F. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00047a · Cited by 477
Hydrogen Storage in Metal-Organic Frameworks: A Review
Langmi, H. W., Ren, J., North, B., Mathe, M., & Bessarabov, D. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.10.190 · Cited by 461
The current status of hydrogen storage in metal–organic frameworks
Zhao, D., Yuan, D., & Zhou, H.-C. (2008) · Energy & Environmental Science · doi:10.1039/b808322n · Cited by 443
An amine-functionalized metal organic framework for preferential CO2 adsorption at low pressures
Vaidhyanathan, R., Iremonger, S. S., Dawson, K. W., & Shimizu, G. K. H. (2009) · Chemical Communications · doi:10.1039/b911481e · Cited by 433
Nanoporous Polymers for Hydrogen Storage
Germain, J., Fréchet, J. M. J., & Svec, F. (2009) · Small · doi:10.1002/smll.200801762 · Cited by 432
Hydrogen Storage in Metal–Organic Frameworks
Hu, Y. H., & Zhang, L. (2010) · Advanced Materials · doi:10.1002/adma.200902096 · Cited by 403
CO2 adsorption and catalytic application of Co-MOF-74 synthesized by microwave heating
Cho, H.-Y., Yang, D.-A., Kim, J., Jeong, S.-Y., & Ahn, W.-S. (2012) · Catalysis Today · doi:10.1016/j.cattod.2011.08.019 · Cited by 381
UiO-66-polyether block amide mixed matrix membranes for CO2 separation
Shen, J., Liu, G., Huang, K., Li, Q., Guan, K., Li, Y., & Jin, W. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.04.045 · Cited by 371
Self-citationHighly-Selective and Reversible O2 Binding in Cr3(1,3,5-benzenetricarboxylate)2
Murray, L. J., Dinca, M., Yano, J., Chavan, S., Bordiga, S., Brown, C. M., & Long, J. R. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1027925 · Cited by 339
Recent progress on desiccant materials for solid desiccant cooling systems
Zheng, X., Ge, T. S., & Wang, R. Z. (2014) · Energy · doi:10.1016/j.energy.2014.07.027 · Cited by 337
Complex Adsorption of Short Linear Alkanes in the Flexible Metal-Organic-Framework MIL-53(Fe)
Llewellyn, P. L., Horcajada, P., Maurin, G., Devic, T., Rosenbach, N., Bourrelly, S., Serre, C., Vincent, D., Loera-Serna, S., Filinchuk, Y., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja902740r · Cited by 317
Thomas, K. M. (2009) · Dalton Transactions · doi:10.1039/b815583f · Cited by 305
Prasad, T. K., Hong, D. H., & Suh, M. P. (2010) · Chemistry – A European Journal · doi:10.1002/chem.201002135 · Cited by 271
Stimuli‐Responsive DNA‐Functionalized Metal–Organic Frameworks (MOFs)
Kahn, J. S., Freage, L., Enkin, N., Garcia, M. A. A., & Willner, I. (2017) · Advanced Materials · doi:10.1002/adma.201602782 · Cited by 266
Rallapalli, P. B. S., Cho, K., Kim, S. H., Kim, J.-N., & Yoon, H. C. (2020) · Fuel · doi:10.1016/j.fuel.2020.118985 · Cited by 20
Structural diversity of alkaline-earth 2,5-thiophenedicarboxylates
Balendra, & Ramanan, A. (2017) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2016.11.029 · Cited by 16
Metadata
- Authors
- Li, Y., & Yang, R. T.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-11-22
- Volume
- 23
- Issue
- 26
- Pages
- 12937-12944
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2005154776
- Cited by
- 636
- References
- 1
- FWCI
- 19.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.