The DOI matches its Crossref record.
Effect of Calcination Temperature on the Structure of a Pt/TiO2 (B) Nanofiber and Its Photocatalytic Activity in Generating H2
Abstract
Hydrogen trititanate (H 2Ti 3O 7) nanofibers were prepared by a hydrothermal method in 10 M NaOH at 403 K, followed by acidic rinsing and drying at 383 K. Calcining H 2Ti 3O 7 nanofibers at 573 K led to the formation of TiO 2 (B) nanofibers. Calcination at 673 K improved the crystallinity of the TiO 2 (B) nanofibers and did not cause any change in the morphology and dimensions of the nanofibers. TiO 2 (B) and H 2Ti 3O 7 nanofibers are 10-20 nm in diameter and several micrometers long, but FE-SEM reveals that several of these nanofibers tend to bind tightly to each other, forming a fiber bundle. Calcination at 773 K transformed TiO 2 (B) nanofibers into a TiO 2 (B)/anatase bicrystalline mixture with their fibrous morphology remaining intact. Upon increasing the calcination temperature to 873 K, most of the TiO 2 (B) nanofibers were converted into anatase nanofibers and small anatase particles with smoother surfaces. In the photocatalytic dehydrogenation of neat ethanol, 1% Pt/TiO 2 (B) nanofiber calcined at 673 K was the most active catalyst and generated about the same amount of H 2 as did 1% Pt/P-25. TPR indicated that the calcination of 1% Pt/TiO 2 (B) nanofiber at 573 K produced a poor Pt dispersion and poor activity. Calcination at a temperature higher than 773 K (in ambient air) resulted in an SMSI effect similar to that observed over TiO 2 in the reductive atmosphere. As suggested by XPS, such an SMSI effect decreased the surface concentration of Pt metal and created Pt (delta) sites, preventing Pt particles from functioning as a Schottky barrier and leading to a lower activity. Because of the synergetic effect between TiO 2 (B) and anatase phases, the bicrystalline mixture, produced by calcining at 773 K, was able to counter negative effects such as the reduction in surface area and the SMSI effect and maintained its photocatalytic activity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Black titanium dioxide (TiO2) nanomaterials
Chen, X., Liu, L., & Huang, F. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00330f · Cited by 1,341
Photocatalysts with internal electric fields
Li, L., Salvador, P. A., & Rohrer, G. S. (2014) · Nanoscale · doi:10.1039/c3nr03998f · Cited by 774
Chen, Y., Huang, W., He, D., Situ, Y., & Huang, H. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503674e · Cited by 693
TiO2Nanoparticles as Functional Building Blocks
Sang, L., Zhao, Y., & Burda, C. (2014) · Chemical Reviews · doi:10.1021/cr400629p · Cited by 487
Photocatalytic production of hydrogen from biomass-derived feedstocks
Puga, A. V. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.12.009 · Cited by 440
Metadata
- Authors
- Lin, C.-H., Chao, J.-H., Liu, C.-H., Chang, J.-C., & Wang, F.-C.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-08-09
- Volume
- 24
- Issue
- 17
- Pages
- 9907-9915
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2088793063
- Cited by
- 163
- References
- 0
- FWCI
- 6.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Calcination Temperature on the Structure of a Pt/TiO2 (B) Nanofiber and Its Photocatalytic Activity in Generating H2. https://app.cochat.ai/papers/10.1021/la800572g
- The paper
- Lin, C.-H., Chao, J.-H., Liu, C.-H., Chang, J.-C., & Wang, F.-C. (2008). Effect of Calcination Temperature on the Structure of a Pt/TiO2 (B) Nanofiber and Its Photocatalytic Activity in Generating H2. Langmuir. https://doi.org/10.1021/la800572g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.