Cellulose Nanocrystals Grafted with Polystyrene Chains through Surface-Initiated Atom Transfer Radical Polymerization (SI-ATRP)
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
This paper reports the synthesis of cellulose nanocrystals grafted by polystyrene chains via surface-initiated ATRP. Naturally occurring cellulose was first hydrolyzed to obtain cellulose nanocrystals. Their surface was then chemically modified using 2-bromoisobutyryl bromide to introduce initiating sites for ATRP. A varying extent of surface modification was achieved by changing reaction conditions. Further initiation of styrene polymerization from these modified nanocrystals with a CuBr/PMDETA (N,N,N',N',N''-pentamethyldiethylenetriamine) catalytic system and in the presence of a sacrificial initiator produced polysaccharide nanocrystals grafted by polystyrene chains. A range of nanocrystals-g-polystyrene with different graft lengths (theoretical polymerization degree = 27-171) was synthesized through this method and characterized by elemental analysis, XPS, FT-IR, TEM, and contact angle measurements. We are thus able to produce cellulose nanoparticles with varying grafting densities (by altering extent of initiator surface modification) and varying polymer brush length (through polymerization control). The nanocrystals-g-polystyrene (NC-g-PS) particles were tested for their capacity to absorb 1,2,4-trichlorobenzene from water. The results obtained show that they can absorb the equivalent of 50% of their weight in pollutant compared to 30 wt % adsorption for nonmodified nanocrystals, while also displaying faster absorption kinetics.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Polystyrene chains were grafted on the surface of cotton nanocrystals via surface-initiated atom transfer radical polymerization (SI-ATRP).”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [44]
In the citing paper
“It was possible to control the character of the polymerization through kinetic study and following the homopolymer number-average molecular weight versus conversion.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [44]
In the citing paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [44]
Citations
Cites
Atom Transfer Radical Polymerization
Matyjaszewski, K., & Xia, J. (2001) · Chemical Reviews · doi:10.1021/cr940534g · Cited by 7,654
Metal-Catalyzed Living Radical Polymerization
Kamigaito, M., Ando, T., & Sawamoto, M. (2001) · Chemical Reviews · doi:10.1021/cr9901182 · Cited by 3,275
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Elastic modulus and stress-transfer properties of tunicate cellulose whiskers
Šturcová, A., Davies, G. R., & Eichhorn, S. J. (2005) · Biomacromolecules · doi:10.1021/bm049291k · Cited by 953
Rodlike cellulose microcrystals: Structure, properties and applications
de Souza Lima, M. M., & Borsali, R. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200300268 · Cited by 894
Superlow Fouling Sulfobetaine and Carboxybetaine Polymers on Glass Slides
Zhang, Z., Chao, T., Chen, S., & Jiang, S. (2006) · Langmuir · doi:10.1021/la062175d · Cited by 673
Habibi, Y., Goffin, A.-L., Schiltz, N., Duquesne, E., Dubois, P., & Dufresne, A. (2008) · Journal of Materials Chemistry · doi:10.1039/b809212e · Cited by 672
TEMPO-mediated surface oxidation of cellulose whiskers
Habibi, Y., Chanzy, H., & Vignon, M. R. (2006) · Cellulose · doi:10.1007/s10570-006-9075-y · Cited by 635
Ohno, K., Morinaga, T., Koh, K., Tsujii, Y., & Fukuda, T. (2005) · Macromolecules · doi:10.1021/ma048011q · Cited by 569
Fluorescently Labeled Cellulose Nanocrystals for Bioimaging Applications
Dong, S., & Roman, M. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076196l · Cited by 493
Research works printed but not linked: 1
- He S.-x., 2007, Gaofenzi Cailiao Kexue Yu Gongcheng, 23, 100
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Self-citationKey advances in the chemical modification of nanocelluloses
Habibi, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60204d · Cited by 1,561
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“CNXL Cellulose Nanocrystals Cotton Whatman filter paper H2SO4 hydrolysis [41] [42] Bacterial cellulose H2SO4 hydrolysis [43] Cotton (cotton wool) H2SO4 hydrolysis [44] MCC H2SO4 hydrolysis [45] MCC Sonication [46] CNW-HCl Cellulose nanowhiskers Cotton linters HCl hydrolysis [47] Wh Whiskers Cellulose fibers H2SO4 hydr…”
MethodCurrent characterization methods for cellulose nanomaterials
Foster, E. J., Moon, R. J., Agarwal, U. P., Bortner, M. J., Bras, J., Camarero-Espinosa, S., Chan, K. J., Clift, M. J. D., Cranston, E. D., Eichhorn, S. J., et al. (2018) · Chemical Society Reviews · doi:10.1039/c6cs00895j · Cited by 1,021
Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00314 · Cited by 1,046
Cellulose nanocrystals and related nanocomposites: Review of some properties and challenges
Mariano, M., El Kissi, N., & Dufresne, A. (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23490 · Cited by 933
Surface modification of cellulose nanocrystals
Eyley, S., & Thielemans, W. (2014) · Nanoscale · doi:10.1039/c4nr01756k · Cited by 869
Self-citationPeng, B. L., Dhar, N., Liu, H. L., & Tam, K. C. (2011) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20554 · Cited by 890
“Schematic diagram illustrating the various types of chemical modifications on NCC surface (Braun and Dorgan, 2009; Hasani et al., 2008; Dong and Roman, 2007; Goussé et al., 2002; Habibi et al., 2006; Morandi et al., 2009).”
BackgroundMethodInfluentialLin, N., Huang, J., & Dufresne, A. (2012) · Nanoscale · doi:10.1039/c2nr30260h · Cited by 885
Jonoobi, M., Oladi, R., Davoudpour, Y., Oksman, K., Dufresne, A., Hamzeh, Y., & Davoodi, R. (2015) · Cellulose · doi:10.1007/s10570-015-0551-0 · Cited by 847
Cellulose nanowhiskers: promising materials for advanced applications
Eichhorn, S. J. (2011) · Soft Matter · doi:10.1039/c0sm00142b · Cited by 782
Review of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Kaushik, M., & Moores, A. (2016) · Green Chemistry · doi:10.1039/c5gc02500a · Cited by 606
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604619 · Cited by 580
Boyer, C., Corrigan, N. A., Jung, K., Nguyen, D., Nguyen, T.-K., Adnan, N. N. M., Oliver, S., Shanmugam, S., & Yeow, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00396 · Cited by 483
Nanofibrillated cellulose: surface modification and potential applications
Kalia, S., Boufi, S., Celli, A., & Kango, S. (2014) · Colloid and Polymer Science · doi:10.1007/s00396-013-3112-9 · Cited by 443
Preparation, characterization and utilization of starch nanoparticles
Kim, H.-Y., Park, S. S., & Lim, S.-T. (2015) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2014.11.011 · Cited by 419
Cellulose nanowhisker aerogels
Heath, L., & Thielemans, W. (2010) · Green Chemistry · doi:10.1039/c0gc00035c · Cited by 352
Self-citationHydrophobic cellulose nanocrystals modified with quaternary ammonium salts
Salajková, M., Berglund, L. A., & Zhou, Q. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34355j · Cited by 336
Chakrabarty, A., & Teramoto, Y. (2018) · Polymers · doi:10.3390/polym10050517 · Cited by 302
“This process can be successfully applied to CNCs via the surface-initiated atom transfer radical polymerization (SI-ATRP) process to prepare polymer/CNC nanocomposites having chemical bonding between the polymer and CNCs [109].”
MethodZoppe, J. O., Habibi, Y., Rojas, O. J., Venditti, R. A., Johansson, L.-S., Efimenko, K., Österberg, M., & Laine, J. (2010) · Biomacromolecules · doi:10.1021/bm100719d · Cited by 283
Cellulose nanomaterials: new generation materials for solving global issues
Mokhena, T. C., & John, M. J. (2020) · Cellulose · doi:10.1007/s10570-019-02889-w · Cited by 269
“grafting of polymeric chains (by radical (Kan et al. 2013; Tehrani and Neysi 2013; Morandi et al. 2009), or ring opening polymerization (Carlmark et al.”
BackgroundGrafting Polymers from Cellulose Nanocrystals: Synthesis, Properties, and Applications
Wohlhauser, S., Delepierre, G., Labet, M., Morandi, G., Thielemans, W., Weder, C., & Zoppe, J. O. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00733 · Cited by 260
Self-citationProcessing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Azzam, F., Heux, L., Putaux, J.-L., & Jean, B. (2010) · Biomacromolecules · doi:10.1021/bm101106c · Cited by 243
McKee, J. R., Appel, E. A., Seitsonen, J., Kontturi, E., Scherman, O. A., & Ikkala, O. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303699 · Cited by 248
The Potential of NanoCellulose in the Packaging Field: A Review
Li, F., Mascheroni, E., & Piergiovanni, L. (2015) · Packaging Technology and Science · doi:10.1002/pts.2121 · Cited by 243
Hu, Z., Berry, R. M., Pelton, R., & Cranston, E. D. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00415 · Cited by 232
Graft modification of cellulose: Methods, properties and applications
Kang, H., Liu, R., & Huang, Y. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.041 · Cited by 232
Wetting and hydrophobic modification of cellulose surfaces for paper applications
Samyn, P. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7519-y · Cited by 223
Siqueira, G., Tapin-Lingua, S., Bras, J., da Silva Perez, D., & Dufresne, A. (2010) · Cellulose · doi:10.1007/s10570-010-9449-z · Cited by 212
“Sulfuric (Bondeson et al. 2006; Morandi et al. 2009; Beck-Candanedo et al. 2005) and hydrochloric (Araki et al. 2001; van den Berg et al. 2007) acids are commonly used to produce individualized rod-like cellulose nanocrystals since the discovery of this process by Ra ˚nby and Ribi (1949, 1950) Suspensions of cellulose…”
MethodThe catalytic oxidation of biomass to new materials focusing on starch, cellulose and lignin
Collinson, S. R., & Thielemans, W. (2010) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2010.04.007 · Cited by 216
Self-citationSurface modification of cellulose nanocrystals (CNC) by a cationic surfactant
Kaboorani, A., & Riedl, B. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.11.027 · Cited by 215
Rebouillat, S., & Pla, F. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.42022 · Cited by 207
Xue, C.-H., Guo, X.-J., Ma, J.-Z., & Jia, S.-T. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01426 · Cited by 210
Nanocellulose in green food packaging
Vilarinho, F., Sanches Silva, A., Vaz, M. F., & Farinha, J. P. (2018) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2016.1270254 · Cited by 203
“The most used chemical modifications are esterification, silylation, cationization, carboxylation, and polymer grafting (Morandi et al, 2009).”
MethodNanocellulose for Industrial Use
Blanco, A., Monte, M. C., Campano, C., Balea, A., Merayo, N., & Negro, C. (2018) · Handbook of Nanomaterials for Industrial Applications · doi:10.1016/b978-0-12-813351-4.00005-5 · Cited by 190
Surface modifications of cellulose nanocrystals: Processes, properties, and applications
Bangar, S. P., Harussani, M. M., Ilyas, R. A., Ashogbon, A. O., Singh, A., Trif, M., & Jafari, S. M. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107689 · Cited by 194
Atom transfer radical polymerization (ATRP): A versatile and forceful tool for functional membranes
Ran, J., Wu, L., Zhang, Z., & Xu, T. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.001 · Cited by 202
Natural antioxidants-based edible active food packaging: An overview of current advancements
M. Rangaraj, V., Rambabu, K., Banat, F., & Mittal, V. (2021) · Food Bioscience · doi:10.1016/j.fbio.2021.101251 · Cited by 186
Green Process for Chemical Functionalization of Nanocellulose with Carboxylic Acids
Espino-Pérez, E., Domenek, S., Belgacem, N., Sillard, C., & Bras, J. (2014) · Biomacromolecules · doi:10.1021/bm5013458 · Cited by 188
Physicomechanical properties of nanocomposites based on cellulose nanofibre and natural rubber latex
Abraham, E., Deepa, B., Pothan, L. A., John, M., Narine, S. S., Thomas, S., & Anandjiwala, R. (2013) · Cellulose · doi:10.1007/s10570-012-9830-1 · Cited by 185
“This result was surprising due to the high specific area of such nanofillers, (Angles and Dufresne 2000; Samir et al. 2004; Morandi et al. 2009).”
BackgroundBiodegradability of organic nanoparticles in the aqueous environment
Kümmerer, K., Menz, J., Schubert, T., & Thielemans, W. (2011) · Chemosphere · doi:10.1016/j.chemosphere.2010.11.069 · Cited by 176
“, 2009; Partha and Conyers, 2009), or surface modification can be used to introduce additional functionality such as the ability to absorb high amounts of organic molecules (Morandi et al., 2009).”
BackgroundSelf-citationAraki, J. (2013) · Soft Matter · doi:10.1039/c3sm27514k · Cited by 169
Graft modification of natural polysaccharides via reversible deactivation radical polymerization
Garcia-Valdez, O., Champagne, P., & Cunningham, M. F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.08.001 · Cited by 174
Zhang, C., Salick, M. R., Cordie, T. M., Ellingham, T., Dan, Y., & Turng, L.-S. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.01.024 · Cited by 169
Majoinen, J., Walther, A., McKee, J. R., Kontturi, E., Aseyev, V., Malho, J. M., Ruokolainen, J., & Ikkala, O. (2011) · Biomacromolecules · doi:10.1021/bm200613y · Cited by 162
Tizzotti, M., Charlot, A., Fleury, E., Stenzel, M., & Bernard, J. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000072 · Cited by 165
Trends in Advanced Functional Material Applications of Nanocellulose
Panchal, P., Ogunsona, E. O., & Mekonnen, T. H. (2018) · Processes · doi:10.3390/pr7010010 · Cited by 169
Chemical modification of nanocellulose with canola oil fatty acid methyl ester
Wei, L., Agarwal, U. P., Hirth, K. C., Matuana, L. M., Sabo, R. C., & Stark, N. M. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.008 · Cited by 168
de Mesquita, J. P., Donnici, C. L., Teixeira, I. F., & Pereira, F. V. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.025 · Cited by 161
Preparation and characterization of functionalized cellulose nanocrystals
Boujemaoui, A., Mongkhontreerat, S., Malmström, E., & Carlmark, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.08.110 · Cited by 153
Imidazolium grafted cellulose nanocrystals for ion exchange applications
Eyley, S., & Thielemans, W. (2011) · Chemical Communications · doi:10.1039/c0cc05359g · Cited by 151
Self-citationCytocompatible Polymer Grafting from Individual Living Cells by Atom‐Transfer Radical Polymerization
Kim, J. Y., Lee, B. S., Choi, J., Kim, B. J., Choi, J. Y., Kang, S. M., Yang, S. H., & Choi, I. S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201608515 · Cited by 151
Nanocellulose: From an agricultural waste to a valuable pharmaceutical ingredient
Kamel, R., El‐Wakil, N. A., Dufresne, A., & ElKasabgy, N. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.242 · Cited by 152
Controlled grafting of cellulose fibres – an outlook beyond paper and cardboard
Malmström, E., & Carlmark, A. (2011) · Polymer Chemistry · doi:10.1039/c1py00445j · Cited by 149
Deng, S., Li, N., Bei, Y., Wang, B., Huang, J. G., & Yu, G. (2012) · Chemosphere · doi:10.1016/j.chemosphere.2012.11.015 · Cited by 152
Shear rheology of polylactide (PLA)–cellulose nanocrystal (CNC) nanocomposites
Bagheriasl, D., Carreau, P. J., Riedl, B., Dubois, C., & Hamad, W. Y. (2016) · Cellulose · doi:10.1007/s10570-016-0914-1 · Cited by 156
“CNC surface modification or compatibilization was necessary to achieve a good CNC dispersion in most of common polymers (Bagheriasl et al. 2015; Goffin et al. 2011a, b; Morandi et al. 2009; Raquez et al. 2012; Siqueira et al. 2009, 2013).”
BackgroundDeng, S., Zheng, Y., Xu, F., Wang, B., Huang, J. G., & Yu, G. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.04.005 · Cited by 145
Zeinali, E., Haddadi‐Asl, V., & Roghani‐Mamaqani, H. (2014) · RSC Advances · doi:10.1039/c4ra05442c · Cited by 135
Surface modified cellulose nanomaterials: a source of non-spherical nanoparticles for drug delivery
Khine, Y. Y., & Stenzel, M. H. (2020) · Materials Horizons · doi:10.1039/c9mh01727e · Cited by 139
Gomri, C., Cretin, M., & Semsarilar, M. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119790 · Cited by 139
Yin, Y., Tian, X., Jiang, X., Wang, H., & Gao, W. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.01.014 · Cited by 130
Applications and impact of nanocellulose based adsorbents
Köse, K., Mavlan, M., & Youngblood, J. P. (2020) · Cellulose · doi:10.1007/s10570-020-03011-1 · Cited by 132
“This is referred to as ‘‘grafting’’, which can be performed in two ways as ‘‘grafting to’’ and ‘‘grafting from’’ (Habibi and Dufresne 2008; Morandi et al. 2009).”
Kedzior, S. A., Zoppe, J. O., Berry, R. M., & Cranston, E. D. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.11.005 · Cited by 133
“FTIR can play a useful role in identifying the presence of these new bonds [67].”
BackgroundMethodInfluentialHu, H., Yuan, W., Liu, F., Cheng, G., Xu, F., & Ma, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02432 · Cited by 127
Nagalakshmaiah, M., Kissi, N. E., & Dufresne, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01650 · Cited by 123
Omo-Okoro, P. N., Daso, A. P., & Okonkwo, J. O. (2017) · Environmental Technology & Innovation · doi:10.1016/j.eti.2017.11.005 · Cited by 131
Versatile Gas-Phase Reactions for Surface to Bulk Esterification of Cellulose Microfibrils Aerogels
Fumagalli, M., Ouhab, D., Molina-Boisseau, S., & Heux, L. (2013) · Biomacromolecules · doi:10.1021/bm400864z · Cited by 123
Labet, M., & Thielemans, W. (2011) · Cellulose · doi:10.1007/s10570-011-9527-x · Cited by 134
Self-citationPark, S.-H., Shin, S. S., Park, C. H., Jeon, S., Gwon, J., Lee, S.-Y., Kim, S.-J., Kim, H., & Lee, J. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122512 · Cited by 121
Harper, B. J., Clendaniel, A., Sinche, F. L., Way, D., Hughes, M., Schardt, J., Simonsen, J., Stefaniak, A. B., & Harper, S. L. (2016) · Cellulose · doi:10.1007/s10570-016-0947-5 · Cited by 123
“Mechanical methods can be followed by chemical treatments to remove non-fibrillated fractions or to chemically functionalize the particle surface (Dufresne 2013; Goussé et al. 2002; Moon et al. 2011; Morandi et al. 2009).”
MethodInfluentialElectrochemical Capacitance of Nanocomposite Polypyrrole/Cellulose Films
Liew, S. Y., Thielemans, W., & Walsh, D. A. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp103698p · Cited by 119
Self-citationCellulosic materials as natural fillers in starch-containing matrix-based films: a review
Gutiérrez, T. J., & Álvarez, V. A. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1814-0 · Cited by 114
Fabrication and applications of cellulose nanoparticle‐based polymer composites
Pandey, J. K., Nakagaito, A. N., & Takagi, H. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23242 · Cited by 115
Nanoreinforced biocompatible hydrogels from wood hemicelluloses and cellulose whiskers
Karaaslan, M. A., Tshabalala, M. A., Yelle, D. J., & Buschle‐Diller, G. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.030 · Cited by 113
Putro, J. N., Kurniawan, A., Ismadji, S., & Ju, Y. (2017) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2017.07.002 · Cited by 123
Rosilo, H., Kontturi, E., Seitsonen, J. J. T., Kolehmainen, E. T., & Ikkala, O. T. (2013) · Biomacromolecules · doi:10.1021/bm400185z · Cited by 111
Liquid-State NMR Analysis of Nanocelluloses
King, A. W. T., Mäkelä, V., Kedzior, S. A., Laaksonen, T., Partl, G., Heikkinen, S., Koskela, H. T., Heikkinen, H. A., Holding, A. J., Cranston, E. D., et al. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00295 · Cited by 104
Preparation of hairy cationic nanocrystalline cellulose
Yang, H., & van de Ven, T. G. M. (2016) · Cellulose · doi:10.1007/s10570-016-0902-5 · Cited by 112
“NCC can also be sterically stabilized by adsorbed or grafted polymers such as poly(ethylene glycol) or poly(styrene) (Elisabeth and Derek 2010; Araki et al. 2001; Morandi et al. 2009), or by sequential periodate oxidation-hot water”
BackgroundLi, M., Mei, C., Xu, X., Lee, S., & Wu, Q. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.022 · Cited by 101
Joubert, F., Musa, O. M., Hodgson, D. R. W., & Cameron, N. R. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00053f · Cited by 100
Synthesis of cellulose nanocrystals bearing photocleavable grafts by ATRP
Morandi, G., & Thielemans, W. (2012) · Polymer Chemistry · doi:10.1039/c2py20069d · Cited by 106
Self-citationThermo-responsive and fluorescent cellulose nanocrystals grafted with polymer brushes
Wu, W., Huang, F., Pan, S., Mu, W., Meng, X., Yang, H., Xu, Z., Ragauskas, A. J., & Deng, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04761c · Cited by 99
Peng, S. X., Chang, H., Kumar, S., Moon, R. J., & Youngblood, J. P. (2016) · Cellulose · doi:10.1007/s10570-016-0912-3 · Cited by 102
Nanocellulosen: eine neue Familie naturbasierter Materialien
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. G., & Dorris, A. (2011) · Angewandte Chemie · doi:10.1002/ange.201001273 · Cited by 98
Zhou, L., He, H., Li, M., Huang, S., Mei, C., & Wu, Q. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.039 · Cited by 97
Surface modification of cellulose by PCL grafts
Paquet, O., Krouit, M., Bras, J., Thielemans, W., & Belgacem, M. N. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.09.057 · Cited by 95
Self-citationBoujemaoui, A., Sánchez, C. C., Engström, J., Bruce, C., Fogelström, L., Carlmark, A., & Malmström, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09009 · Cited by 97
Recent Trends in the Preparation of Nano-Starch Particles
Hassan, N. A., Darwesh, O. M., Smuda, S. S., Altemimi, A. B., Hu, A., Cacciola, F., Haoujar, I., & Abedelmaksoud, T. G. (2022) · Molecules · doi:10.3390/molecules27175497 · Cited by 94
Zhang, Y., Zhang, Y., Xu, W., Wu, H., Shao, Y., Han, X., Zhou, M., Gu, P., & Li, Z. (2023) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2023.100707 · Cited by 94
Integration of renewable cellulose and rosin towards sustainable copolymers by “grafting from” ATRP
Yu, J., Liu, Y., Liu, X., Wang, C., Wang, J., Chu, F., & Tang, C. (2013) · Green Chemistry · doi:10.1039/c3gc41550c · Cited by 102
Ma, X., Cheng, Y., Qin, X., Guo, T., Deng, J., & Liu, X. (2017) · LWT · doi:10.1016/j.lwt.2017.08.012 · Cited by 94
Zhang, Z., Sèbe, G., Wang, X., & Tam, K. C. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.094 · Cited by 93
Zhang, Z., Wang, X., Tam, K. C., & Sèbe, G. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.050 · Cited by 91
Imato, K., Natterodt, J. C., Sapkota, J., Goseki, R., Weder, C., Takahara, A., & Otsuka, H. (2017) · Polymer Chemistry · doi:10.1039/c7py00074j · Cited by 87
Metadata
- Authors
- Morandi, G., Heath, L., & Thielemans, W.
- Affiliations
- School of Chemistry and Process and Environmental Research Division—Faculty of Engineering, The University of Nottingham, Nottingham NG7 2RD, U.K.
- University of Nottingham (GB)
- Corresponding author
- Thielemans, Wim
- ORCID
- Thielemans, Wim
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-04-06
- Volume
- 25
- Issue
- 14
- Pages
- 8280-8286
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2101642953
- Cited by
- 405
- References
- 30
- Citations by year
- 2026: 3 · 2025: 9 · 2024: 9 · 2023: 24 · 2022: 24 · 2021: 26 · 2020: 31 · 2019: 21 · 2018: 30 · 2017: 43 · 2016: 39 · 2015: 28 · 2014: 33 · 2013: 28 · 2012: 15
- FWCI
- 8.33
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Funders
- Engineering and Physical Sciences Research Council (EP/D501229/1)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Life Sciences › Agricultural and Biological Sciences › Agronomy and Crop Science › Polymer-Based Agricultural Enhancements
- Keywords
- cellulose nanocrystals, polystyrene grafting, surface-initiated ATRP, 2-bromoisobutyryl bromide, surface modification, grafting density, polymer brushes, styrene polymerization, water pollutant removal, adsorption kinetics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.