Cellulose Nanocrystals Grafted with Polystyrene Chains through Surface-Initiated Atom Transfer Radical Polymerization (SI-ATRP)
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
This paper reports the synthesis of cellulose nanocrystals grafted by polystyrene chains via surface-initiated ATRP. Naturally occurring cellulose was first hydrolyzed to obtain cellulose nanocrystals. Their surface was then chemically modified using 2-bromoisobutyryl bromide to introduce initiating sites for ATRP. A varying extent of surface modification was achieved by changing reaction conditions. Further initiation of styrene polymerization from these modified nanocrystals with a CuBr/PMDETA (N,N,N',N',N''-pentamethyldiethylenetriamine) catalytic system and in the presence of a sacrificial initiator produced polysaccharide nanocrystals grafted by polystyrene chains. A range of nanocrystals-g-polystyrene with different graft lengths (theoretical polymerization degree = 27-171) was synthesized through this method and characterized by elemental analysis, XPS, FT-IR, TEM, and contact angle measurements. We are thus able to produce cellulose nanoparticles with varying grafting densities (by altering extent of initiator surface modification) and varying polymer brush length (through polymerization control). The nanocrystals-g-polystyrene (NC-g-PS) particles were tested for their capacity to absorb 1,2,4-trichlorobenzene from water. The results obtained show that they can absorb the equivalent of 50% of their weight in pollutant compared to 30 wt % adsorption for nonmodified nanocrystals, while also displaying faster absorption kinetics.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Polystyrene chains were grafted on the surface of cotton nanocrystals via surface-initiated atom transfer radical polymerization (SI-ATRP).”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [44]
In the citing paper
“It was possible to control the character of the polymerization through kinetic study and following the homopolymer number-average molecular weight versus conversion.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [44]
In the citing paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [44]
Citations
Cites
Atom Transfer Radical Polymerization
Matyjaszewski, K., & Xia, J. (2001) · Chemical Reviews · doi:10.1021/cr940534g · Cited by 7,654
Metal-Catalyzed Living Radical Polymerization
Kamigaito, M., Ando, T., & Sawamoto, M. (2001) · Chemical Reviews · doi:10.1021/cr9901182 · Cited by 3,275
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Elastic modulus and stress-transfer properties of tunicate cellulose whiskers
Šturcová, A., Davies, G. R., & Eichhorn, S. J. (2005) · Biomacromolecules · doi:10.1021/bm049291k · Cited by 953
Rodlike cellulose microcrystals: Structure, properties and applications
de Souza Lima, M. M., & Borsali, R. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200300268 · Cited by 894
Superlow Fouling Sulfobetaine and Carboxybetaine Polymers on Glass Slides
Zhang, Z., Chao, T., Chen, S., & Jiang, S. (2006) · Langmuir · doi:10.1021/la062175d · Cited by 673
Habibi, Y., Goffin, A.-L., Schiltz, N., Duquesne, E., Dubois, P., & Dufresne, A. (2008) · Journal of Materials Chemistry · doi:10.1039/b809212e · Cited by 672
TEMPO-mediated surface oxidation of cellulose whiskers
Habibi, Y., Chanzy, H., & Vignon, M. R. (2006) · Cellulose · doi:10.1007/s10570-006-9075-y · Cited by 635
Ohno, K., Morinaga, T., Koh, K., Tsujii, Y., & Fukuda, T. (2005) · Macromolecules · doi:10.1021/ma048011q · Cited by 569
Fluorescently Labeled Cellulose Nanocrystals for Bioimaging Applications
Dong, S., & Roman, M. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076196l · Cited by 493
Research works printed but not linked: 1
- He S.-x., 2007, Gaofenzi Cailiao Kexue Yu Gongcheng, 23, 100
Cited by
Items 101–200 of 421
Li, M., Liu, X., Liu, N., Guo, Z., Singh, P. K., & Fu, S. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.06.031 · Cited by 88
Hajebi, S., Abdollahi, A., Roghani‐Mamaqani, H., & Salami‐Kalajahi, M. (2020) · Langmuir · doi:10.1021/acs.langmuir.9b03892 · Cited by 87
Cellulose nanomaterials in oil and gas industry: Current status and future perspectives
Li, M., Liu, X., Lv, K., Sun, J., Dai, C., Liao, B., Liu, C., Mei, C., Wu, Q., & Hubbe, M. A. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101187 · Cited by 89
Grafting of model primary amine compounds to cellulose nanowhiskers through periodate oxidation
Dash, R., Elder, T., & Ragauskas, A. J. (2012) · Cellulose · doi:10.1007/s10570-012-9769-2 · Cited by 84
“Acetylation of whiskers was also carried out in vinyl acetate, alkenyl succinic anhydride (ASA) to improve the dispersion of whiskers in organic solvents (Cetin et al. 2009; Nair et al. 2003; Angellier et al. 2005; Yuan et al. 2006).”
BackgroundHemraz, U. D., Lu, A., Sunasee, R., & Boluk, Y. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.05.011 · Cited by 87
Molecular insight into the wetting behavior and amphiphilic character of cellulose nanocrystals
Malaspina, D. C., & Faraudo, J. (2019) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2019.02.003 · Cited by 80
“The interaction of cellulose crystals with peptides has also been considered in Ref [30], modeling the cellulose and the protein with150 the CHARMM forcefield and the water with the TIP3P model.”
BackgroundInfluentialHuang, C., Chen, J.-K., Tsai, T.-Y., Hsieh, Y.-A., & Lin, K. A. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.056 · Cited by 83
Semiconductor/biomolecular composites for solar energy applications
Li, C., Wang, F., & Yu, J. C. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00162g · Cited by 82
Cellulose nanocrystal-poly(oligo(ethylene glycol) methacrylate) brushes with tunable LCSTs
Grishkewich, N., Akhlaghi, S. P., Yao, Z., Berry, R., & Tam, K. C. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.044 · Cited by 84
Lacerda, P. S. S., Barros-Timmons, A. M., Freire, C. S. R., Silvestre, A. J. D., & Neto, C. P. (2013) · Biomacromolecules · doi:10.1021/bm400432b · Cited by 88
Cereal starch nanoparticles—A prospective food additive: A review
Kaur, J., Kaur, G., Sharma, S., & Jeet, K. (2016) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2016.1238339 · Cited by 83
“Compared to native biopolymers, the nanoparticles derived from those have increased efficiency and capacity due to the increased surface area, as proved by the cellulose nanowhiskers (Morandi et al., 2009).”
BackgroundLabet, M., & Thielemans, W. (2012) · Polymer Chemistry · doi:10.1039/c2py00493c · Cited by 83
Self-citationSynthesis and characterization of designed cellulose-graft-polyisoprene copolymers
Wang, Z., Zhang, Y., Jiang, F. D., Fang, H., & Wang, Z. (2014) · Polymer Chemistry · doi:10.1039/c3py01574b · Cited by 80
Biomimetic Reversible Heat-Stiffening Polymer Nanocomposites
Cudjoe, E., Khani, S., Way, A. E., Hore, M. J. A., Maia, J. M., & Rowan, S. J. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00215 · Cited by 82
Fan, P., Yuan, Y., Ren, J., Yuan, B., He, Q., Xia, G., Chen, F., & Song, R. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.015 · Cited by 77
Bagheriasl, D., Carreau, P. J., Dubois, C., & Riedl, B. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.07.012 · Cited by 85
Opportunities, Challenges, and Pitfalls in Making, Characterizing, and Understanding Polymer Brushes
Pester, C. W., Klok, H., & Benetti, E. M. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01292 · Cited by 81
Cellulose derivatives and graft copolymers as blocks for functional materials
Kang, H., Liu, R., & Huang, Y. P. (2013) · Polymer International · doi:10.1002/pi.4455 · Cited by 78
Zheng, Y., Deng, S., Li, N., Xu, F., Chai, M. Y., & Yu, G. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.06.054 · Cited by 74
Azzam, F., Siqueira, É. J., Fort, S., Hassaini, R., Pignon, F., Travelet, C., Putaux, J., & Jean, B. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00344 · Cited by 77
Haqani, M., Roghani‐Mamaqani, H., & Salami‐Kalajahi, M. (2017) · Cellulose · doi:10.1007/s10570-017-1249-2 · Cited by 73
“Morandi et al. (2009) reported a similar way to synthesize polystyrene-grafted NCCs by surface-initiated ATRP.”
BackgroundMethodYounas, M., Noreen, A., Sharif, A., Majeed, A., Hassan, A., Tabasum, S., Mohammadi, A., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.064 · Cited by 74
Surface functionalization of cellulose by grafting oligoether chains
Ly, E. H. B., Bras, J., Sadocco, P., Belgacem, M. N., Dufresne, A., & Thielemans, W. (2009) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2009.11.032 · Cited by 72
Self-citationLi, S., Xiao, M., Zheng, A., & Xiao, H. (2011) · Biomacromolecules · doi:10.1021/bm200797a · Cited by 77
Biomass Approach toward Robust, Sustainable, Multiple-Shape-Memory Materials
Wang, Z., Zhang, Y., Yuan, L., Hayat, J., Trenor, N. M., Lamm, M. E., Vlaminck, L., Billiet, S., Prez, F. D., Wang, Z., et al. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00243 · Cited by 76
Polymer Brushes on Cellulose Nanofibers: Modification, SI-ATRP, and Unexpected Degradation Processes
Morits, M., McKee, J. R., Majoinen, J., Malho, J., Houbenov, N., Seitsonen, J. J. T., Laine, J., Gröschel, A. H., & Ikkala, O. T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00972 · Cited by 77
Kedzior, S. A., Dubé, M. A., & Cranston, E. D. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02510 · Cited by 72
Characterization of cellulose nanocrystals by current spectroscopic techniques
Dassanayake, R. S., Dissanayake, N., Trujillo, J. S. F., Abidi, N., Quitevis, E. L., Boggavarappu, K., & Thalangamaarachchige, V. D. (2021) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2021.1951283 · Cited by 73
“Morandi and coworkers demonstrated the effective surface modification of cellulose nanocrystals grafted with polystyrene chains using the C1s signal of the C C bond in the XPS spectrogram.([77]) Tian et al.”
BackgroundHydrophobic modification of wood via surface-initiated ARGET ATRP of MMA
Fu, Y., Li, G., Yu, H., & Li, P. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.10.087 · Cited by 72
Surface modification of cellulose via conventional and controlled radiation-induced grafting
Barsbay, M., & Güven, O. (2019) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2019.03.002 · Cited by 71
Madhushree, M., Vairavel, P., Mahesha, G. T., & Bhat, K. S. (2024) · Journal of Natural Fibers · doi:10.1080/15440478.2024.2418357 · Cited by 75
“Surface-initiated ATRP is performed by first converting cellulose into nanocrystals through hydrolysis and then treating it with 2-bromoisobutyryl bromide, which usually acts as an initiator in many natural celluloses that undergo ATRP for polystyrene polymers (Morandi, Heath, and Thielemans 2009).”
A facile one-pot route to cationic cellulose nanocrystals
Jasmani, L., Eyley, S., Wallbridge, R., & Thielemans, W. (2013) · Nanoscale · doi:10.1039/c3nr03456a · Cited by 80
Self-citationPark, C. H., Jeon, S., Park, S.-H., Shin, M. G., Park, M. S., Lee, S.-Y., & Lee, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10932j · Cited by 68
Nanocellulose/Starch Biopolymer Nanocomposites: Processing, Manufacturing, and Applications
Ilyas, R. A., Sapuan, S. M., Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., Kadier, A., Kalil, M. S., Atikah, M. S. N., Ibrahim, R., Asrofi, M., Abral, H., et al. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00006-8 · Cited by 73
Moreau, C., Villares, A., Capron, I., & Cathala, B. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.028 · Cited by 74
Graft modification of cellulose nanocrystals via nitroxide-mediated polymerisation
Roeder, R. D., García‐Valdez, O., Whitney, R. A., Champagne, P., & Cunningham, M. F. (2016) · Polymer Chemistry · doi:10.1039/c6py01515h · Cited by 75
Majdoub, M., Essamlali, Y., Amadine, O., Ganetri, I., Hafnaoui, A., Khouloud, M., & Zahouily, M. (2021) · Cellulose · doi:10.1007/s10570-021-04044-w · Cited by 67
Surface-initiated atom transfer radical polymerization of butyl acrylate on cellulose microfibrils
Xiao, M., Li, S., Chanklin, W., Zheng, A., & Xiao, H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.011 · Cited by 66
Gars, M. L., Bras, J., Salmi-Mani, H., Ji, M., Dragoé, D., Faraj, H., Domenek, S., Belgacem, M. N., & Roger, P. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115899 · Cited by 67
Grafting CO 2 -responsive polymers from cellulose nanocrystals via nitroxide-mediated polymerisation
García‐Valdez, O., Brescacin, T., Arredondo, J., Bouchard, J., Jessop, P. G., Champagne, P., & Cunningham, M. F. (2017) · Polymer Chemistry · doi:10.1039/c7py00631d · Cited by 68
Yu, J., Wang, C., Wang, J., & Chu, F. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.01.006 · Cited by 68
Alila, S., Aloulou, F., Thielemans, W., & Boufi, S. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.11.010 · Cited by 63
Self-citationBendahou, A., Hajlane, A., Dufresne, A., Boufi, S., & Kaddami, H. (2014) · Research on Chemical Intermediates · doi:10.1007/s11164-014-1530-z · Cited by 70
Thermally Switchable Liquid Crystals Based on Cellulose Nanocrystals with Patchy Polymer Grafts
Risteen, B. E., Delepierre, G., Srinivasarao, M., Weder, C., Russo, P. S., Reichmanis, E., & Zoppe, J. O. (2018) · Small · doi:10.1002/smll.201802060 · Cited by 67
Zhang, J., Wu, Q., Li, M., Song, K., Sun, X., Lee, S.-Y., & Lei, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02033 · Cited by 65
Zhang, Z., Tam, K. C., Sèbe, G., & Wang, X. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.060 · Cited by 62
Production, Processes and Modification of Nanocrystalline Cellulose from Agro-Waste: A Review
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Atiqah, A., Ansari, M. N. M., & Norrrahim, M. N. F. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.87001 · Cited by 66
Bioinspired N -Oxide-Based Zwitterionic Polymer Brushes for Robust Fouling-Resistant Surfaces
Feng, Z., Feng, X., & Lu, X. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c00128 · Cited by 61
The use of biobased nanofibres in composites
Bandyopadhyay‐Ghosh, S., Ghosh, S. B., & Sain, M. M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.5.571 · Cited by 76
Materials by Design for Stiff and Tough Hairy Nanoparticle Assemblies
Hansoge, N. K., Huang, T., Sinko, R., Xia, W., Chen, W., & Keten, S. (2018) · ACS Nano · doi:10.1021/acsnano.8b02454 · Cited by 63
Alanis, A., Valdés, J. H., Guadalupe, N.-V. M., López-González, H. R., Mendoza, R., Mathew, A. P., de León, R. D., & Valencia, L. (2019) · RSC Advances · doi:10.1039/c9ra02451d · Cited by 63
Zhang, Z., Sèbe, G., Hou, Y., Wang, J., Huang, J. T., & Zhou, G. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51458 · Cited by 63
Smith, E. D., Hendren, K. D., Haag, J. V., Foster, E. J., & Martin, S. M. (2019) · Nanomaterials · doi:10.3390/nano9010125 · Cited by 60
“Many surface modification techniques exist to change these surface functionalities in order to alter the properties of the nanocrystals [20,23,24] such as 2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation [20].”
BackgroundOberlintner, A., Likozar, B., & Novak, U. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117742 · Cited by 61
Wang, P., Zhou, Y., Luo, J., & Luo, Z. (2013) · Polymer Chemistry · doi:10.1039/c3py01025b · Cited by 58
Graft modification of crystalline nanocellulose by Cu(0)‐mediated SET living radical polymerization
Wang, H., Roeder, R. D., Whitney, R. A., Champagne, P., & Cunningham, M. F. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27754 · Cited by 60
Elucidating the Potential Biological Impact of Cellulose Nanocrystals
Camarero‐Espinosa, S., Voss, C., Mueller, S., Petri‐Fink, A., Rothen‐Rutishauser, B., Weder, C., Clift, M. J. D., & Foster, E. J. (2016) · Fibers · doi:10.3390/fib4030021 · Cited by 60
Surface Engineering with Polymer Brush Photolithography
Fromel, M., Li, M., & Pester, C. W. (2020) · Macromolecular Rapid Communications · doi:10.1002/marc.202000177 · Cited by 60
de Paula, E. L., Roig, F., Mas, A., Habas, J., Mano, V., Pereira, F. V., & Robin, J. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.019 · Cited by 60
Zeinali, E., Haddadi‐Asl, V., & Roghani‐Mamaqani, H. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36230 · Cited by 56
Reinforced plastics and aerogels by nanocrystalline cellulose
Leung, A. C. W., Lam, E., Chong, J. H., Hrapovic, S., & Luong, J. H. T. (2013) · Journal of Nanoparticle Research · doi:10.1007/s11051-013-1636-z · Cited by 62
“Polystyrene chains and the decorated NCC are tested for bioremediation applications: it absorbs 50 % of its weight in 1,2,4trichlorobenzene from water (Morandi et al. 2009).”
Grafting of Cellulose Nanocrystals
Lizundia, E., Meaurio, E., & Vilas, J. L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00003-1 · Cited by 62
Glasing, J., Bouchard, J., Jessop, P. G., Champagne, P., & Cunningham, M. F. (2017) · Polymer Chemistry · doi:10.1039/c7py01258f · Cited by 55
Silylation of cellulose nanocrystals and their reinforcement of commercial silicone rubber
Yu, H., Chen, R., Chen, G., Liu, L., Yang, X., & Yao, J. (2015) · Journal of Nanoparticle Research · doi:10.1007/s11051-015-3165-4 · Cited by 55
“Similar trend is observed in the storage modulus of several natural fiber-reinforced nanocomposites (Abraham et al. 2013a; Angles and Dufresne 2000; Chirayil et al. 2014; Morandi et al. 2009; Simpson et al. 2004).”
BackgroundSynthetic Strategies for the Fabrication of Cationic Surface-Modified Cellulose Nanocrystals
Sunasee, R., & Hemraz, U. D. (2018) · Fibers · doi:10.3390/fib6010015 · Cited by 59
Chemical structure–property relationships in nanocelluloses
Pitcher, M. L., Koshani, R., & Sheikhi, A. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230558 · Cited by 58
Polymerization of cellulose nanocrystals-based Pickering HIPE towards green porous materials
Dupont, H., Fouché, C., Dourges, M., Schmitt, V., & Héroguez, V. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116411 · Cited by 53
“In addition it may be useful as 163 polymerization initiator (Meng et al., 2009; Morandi et al., 2009; Werner et al., 2019).”
BackgroundEspino-Pérez, E., Bras, J., Almeida, G., Relkin, P., Belgacem, M. N., Plessis, C., & Domenek, S. (2016) · Cellulose · doi:10.1007/s10570-016-0994-y · Cited by 53
Carbohydrate functionalized hybrid latex particles
Smeets, N. M. B., Imbrogno, S., & Bloembergen, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.05.075 · Cited by 55
Recent Advances on Cellulose Nanocrystals and Their Derivatives
Peng, S., Luo, Q., Zhou, G., & Xu, X. (2021) · Polymers · doi:10.3390/polym13193247 · Cited by 51
“esterified CNCs through the Br-iBBr activated atom-transfer radical-polymerization (SI-ATRP) reaction (Figure 23b) [99].”
Siqueira, G. D. F., Mathew, A. P., & Oksman, K. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.09.002 · Cited by 53
Poly(lactic acid)-based biocomposites reinforced with modified cellulose nanocrystals
Yin, Y., Zhao, L.-N., Jiang, X., Wang, H., & Gao, W. (2017) · Cellulose · doi:10.1007/s10570-017-1455-y · Cited by 50
“2013, 2014a, b), polymer grafting (Ljungberg et al. 2005; Roy et al. 2005; Morandi et al. 2009; Goffin et al. 2012), etc.”
BackgroundEspino-Pérez, E., Gilbert, R. G., Domenek, S., Brochier-Salon, M.-C., Belgacem, M. N., & Bras, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.005 · Cited by 49
Zhang, X., Zhang, J., Dong, L., Ren, S., Wu, Q., & Lei, T. (2017) · Cellulose · doi:10.1007/s10570-017-1414-7 · Cited by 52
Ilyas, R. A., Sapuan, S. M., Nurazzi, N. M., Norrrahim, M. N. F., Ibrahim, R., Atikah, M. S. N., Huzaifah, M. R. M., Radzi, A. M., Izwan, S. M., Azammi, A. M. N., et al. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820559-4.00003-1 · Cited by 62
Fabrication of cellulose self-assemblies and high-strength ordered cellulose films
Yuan, Z., Zhang, J., Jiang, A., Lv, W., Wang, Y., Geng, H., Wang, J., & Qin, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.003 · Cited by 48
Glycopolymer Grafted Silica Gel as Chromatographic Packing Materials
Ma, G., Luo, X., Sun, X., Wang, W., Shou, Q., Liang, X., & Liu, H. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms20010010 · Cited by 47
“Controlling the molecular chain length of sugar-containing polymers is also necessary to achieve the polymer’s desired properties in a particular application [10].”
BackgroundZoppe, J. O., Xu, X., Känel, C., Orsolini, P., Siqueira, G. D. F., Tingaut, P., Zimmermann, T., & Klok, H. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00011 · Cited by 48
Hatton, F. L., Kedzior, S. A., Cranston, E. D., & Carlmark, A. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.10.064 · Cited by 47
Designing 3D Biological Surfaces via the Breath‐Figure Method
Chen, S., Gao, S., Jing, J., & Lu, Q. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701043 · Cited by 47
The Surface and In-Depth Modification of Cellulose Fibers
Gandini, A., & Belgacem, M. N. (2015) · Advances in polymer science · doi:10.1007/12_2015_305 · Cited by 51
Macro- and nanodimensional plant fiber reinforcements for cementitious composites
Parveen, S., Rana, S., & Fangueiro, R. M. E. S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-102001-2.00020-6 · Cited by 50
Arredondo, J., Jessop, P. G., Champagne, P., Bouchard, J., & Cunningham, M. F. (2017) · Green Chemistry · doi:10.1039/c7gc01798g · Cited by 44
Banerjee, S., Paira, T. K., & Mandal, T. K. (2014) · Polymer Chemistry · doi:10.1039/c4py00007b · Cited by 46
Dagnon, K. L., Way, A. E., Carson, S. O., Silva, J., Maia, J. M., & Rowan, S. J. (2013) · Macromolecules · doi:10.1021/ma4008187 · Cited by 47
Enhanced properties of polylactide by incorporating cellulose nanocrystals
Bagheriasl, D., Carreau, P. J., Riedl, B., & Dubois, C. (2016) · Polymer Composites · doi:10.1002/pc.24259 · Cited by 47
Lamm, M. E., Wang, Z., Zhou, J., Yuan, L., Zhang, X., & Tang, C. (2018) · Polymer · doi:10.1016/j.polymer.2018.04.047 · Cited by 46
“Bromoisobutyryl bromide-coated cellulose nanocrystal as initiators (CNC-Br) were synthesized according to literature [5,43].”
MethodModification of wood-based materials by atom transfer radical polymerization methods
Zaborniak, I., Chmielarz, P., & Matyjaszewski, K. A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109253 · Cited by 46
Wang, Q., Feng, X., & Liu, X. (2023) · Cellulose · doi:10.1007/s10570-023-05403-5 · Cited by 43
Cellulose grafting by photoinduced controlled radical polymerisation
Larsson, E., Pendergraph, S. A., Kaldéus, T., Malmström, E., & Carlmark, A. (2014) · Polymer Chemistry · doi:10.1039/c4py01618a · Cited by 42
Zhu, J., Xie, S., Yang, Z., Li, X., Chen, J. Z.-J., Zhang, X., & Zheng, N. (2021) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2021.104253 · Cited by 41
Polymer Brushes: Promises and Challenges
Yameen, B., & Farrukh, A. (2013) · Chemistry - An Asian Journal · doi:10.1002/asia.201300149 · Cited by 42
A review of bio-based nanocellulose epoxy composites
Ilyas, R. A., Asyraf, M. R. M., Rajeshkumar, L., Awais, H., Siddique, A., Shaker, K., Nawab, Y., & Wahit, M. U. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.113835 · Cited by 45
Hansson, S., Antoni, P., Bergenudd, H., & Malmström, E. (2010) · Polymer Chemistry · doi:10.1039/c0py00388c · Cited by 40
Werner, A., Schmitt, V., Sèbe, G., & Héroguez, V. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01482 · Cited by 40
Huang, L., Ye, Z., & Berry, R. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01253 · Cited by 40
Chen, M., Fan, D., Liu, S., Rao, Z., Dong, Y., Wang, W., Chen, H., Bai, L., & Cheng, Z. (2019) · Polymer Chemistry · doi:10.1039/c8py01402g · Cited by 38
Huang, C. (2016) · Polymer Journal · doi:10.1038/pj.2016.24 · Cited by 41
Abdullah, N. A., Rani, M. S. A., Mohammad, M., Sainorudin, M. H., Asim, N., Yaakob, Z., Razali, H., & Emdadi, Z. (2021) · Polimery · doi:10.14314/polimery.2021.3.1 · Cited by 43
Surface modification of cellulose nanowhiskers and their reinforcing effect in polylactide
Lee, J. H., Park, S., & Kim, S. H. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2064-3 · Cited by 37
Metadata
- Authors
- Morandi, G., Heath, L., & Thielemans, W.
- Affiliations
- School of Chemistry and Process and Environmental Research Division—Faculty of Engineering, The University of Nottingham, Nottingham NG7 2RD, U.K.
- University of Nottingham (GB)
- Corresponding author
- Thielemans, Wim
- ORCID
- Thielemans, Wim
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-04-06
- Volume
- 25
- Issue
- 14
- Pages
- 8280-8286
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2101642953
- Cited by
- 405
- References
- 30
- Citations by year
- 2026: 3 · 2025: 9 · 2024: 9 · 2023: 24 · 2022: 24 · 2021: 26 · 2020: 31 · 2019: 21 · 2018: 30 · 2017: 43 · 2016: 39 · 2015: 28 · 2014: 33 · 2013: 28 · 2012: 15
- FWCI
- 8.33
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Funders
- Engineering and Physical Sciences Research Council (EP/D501229/1)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Life Sciences › Agricultural and Biological Sciences › Agronomy and Crop Science › Polymer-Based Agricultural Enhancements
- Keywords
- cellulose nanocrystals, polystyrene grafting, surface-initiated ATRP, 2-bromoisobutyryl bromide, surface modification, grafting density, polymer brushes, styrene polymerization, water pollutant removal, adsorption kinetics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.