Functionalization of Delaminated Zeolite ITQ-6 for the Adsorption of Carbon Dioxide
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Novel functionalized adsorbents for CO(2) separation were synthesized by grafting 3-aminopropyl, 3-(methylamino)propyl, or 3-(phenylamino)propyl ligands in the delaminated zeolite ITQ-6. On the basis of the texture parameters determined from nitrogen adsorption isotherms recorded at 77 K and the results of chemical analysis, physicochemical properties of functionalized ITQ-6 were evaluated and compared with those of mesoporous SBA-15 silica functionalized with the same ligands. To examine carbon dioxide adsorption on functionalized materials, adsorption isotherms at 293 K were measured. To obtain information on the surface energetics of CO(2) adsorption on selected samples, isotherms were taken in the temperature range from 273 to 333 K and adsorption isosteres were calculated. Isosteric adsorption heats determined from the slope of adsorption isosteres proved that all of the 3-aminopropyl ligands in ITQ-6 take part in CO(2) adsorption. It was found that in the whole region of CO(2) pressures the efficiency of the amine ligand, defined as the number of adsorbed CO(2) molecules per one amine ligand, is higher for functionalized ITQ-6 than for functionalized SBA-15 silica.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Alkali and alkaline-earth cation exchanged chabazite zeolites for adsorption based CO2 capture
Zhang, J., Singh, R., & Webley, P. A. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.08.022 · Cited by 313
Cited by
Vaidhyanathan, R., Iremonger, S. S., Shimizu, G. K. H., Boyd, P. G., Alavi, S., & Woo, T. K. (2010) · Science · doi:10.1126/science.1194237 · Cited by 927
Two-Dimensional Zeolites: Current Status and Perspectives
Roth, W. J., Nachtigall, P., Morris, R. E., & Čejka, J. (2014) · Chemical Reviews · doi:10.1021/cr400600f · Cited by 735
Self-citationAdsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Direct synthesis of ordered mesoporous carbons
Ma, T.-Y., Liu, L., & Yuan, Z.-Y. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35301f · Cited by 598
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Adsorption/catalytic properties of MIL-125 and NH2-MIL-125
Kim, S.-N., Kim, J., Kim, H.-Y., Cho, H.-Y., & Ahn, W.-S. (2013) · Catalysis Today · doi:10.1016/j.cattod.2012.08.014 · Cited by 528
Amine-Based Nanofibrillated Cellulose As Adsorbent for CO2 Capture from Air
Gebald, C., Wurzbacher, J. A., Tingaut, P., Zimmermann, T., & Steinfeld, A. (2011) · Environmental Science & Technology · doi:10.1021/es202223p · Cited by 457
Activated Carbon Spheres for CO2 Adsorption
Wickramaratne, N. P., & Jaroniec, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400112m · Cited by 445
Belmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
Čejka, J., Centi, G., Perez-Pariente, J., & Roth, W. J. (2012) · Catalysis Today · doi:10.1016/j.cattod.2011.10.006 · Cited by 312
Self-citationCO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Carbon dioxide capture with zeotype materials
Fu, D., & Davis, M. E. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00508e · Cited by 284
Mohanty, P., Kull, L. D., & Landskron, K. (2011) · Nature Communications · doi:10.1038/ncomms1405 · Cited by 282
Nandi, M., Okada, K., Dutta, A., Bhaumik, A., Maruyama, J., Derks, D., & Uyama, H. (2012) · Chemical Communications · doi:10.1039/c2cc35334b · Cited by 278
Two-dimensional zeolites: dream or reality?
Roth, W. J., & Čejka, J. (2011) · Catalysis Science & Technology · doi:10.1039/c0cy00027b · Cited by 275
Self-citationWurzbacher, J. A., Gebald, C., & Steinfeld, A. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01681d · Cited by 252
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Single-Component and Binary CO2 and H2O Adsorption of Amine-Functionalized Cellulose
Gebald, C., Wurzbacher, J. A., Borgschulte, A., Zimmermann, T., & Steinfeld, A. (2014) · Environmental Science & Technology · doi:10.1021/es404430g · Cited by 226
Controlling the Adsorption Enthalpy of CO2 in Zeolites by Framework Topology and Composition
Grajciar, L., Čejka, J., Zukal, A., Otero Areán, C., Turnes Palomino, G., & Nachtigall, P. (2012) · ChemSusChem · doi:10.1002/cssc.201200270 · Cited by 112
Self-citation
Metadata
- Authors
- Zukal, A., Dominguez, I., Mayerová, J., & Čejka, J.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-09
- Volume
- 25
- Issue
- 17
- Pages
- 10314-10321
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2011403076
- Cited by
- 143
- References
- 2
- FWCI
- 34.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.