The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Contact-Inking Stamps for Microcontact Printing of Alkanethiols on Gold
Abstract
Microcontact printing uses an inked patterned stamp to direct chemical reactions between molecules from the ink and the surface of a substrate. Here, we use this technique with solutions of alkanethiols as ink on the surface of the stamp and gold as the substrate to form a self-assembled monolayer in the regions of contact to protect the gold from a subsequent wet etch. We describe an alternative method for inking stamps based on their contact with an elastomer impregnated with ink. One of the principal findings is that control over the amount of ink transferred during inking from the inker pad to the stamp is possible by changing the concentration of the thiol solution used for impregnation. Contact inking partially localizes the ink where it is needed to form a protective self-assembled monolayer. As a consequence, the degree of completion of the printed monolayer becomes largely independent from the geometry of the pattern, and uncontrolled diffusion of the thiols during printing interferes noticeably less than when wet inking is performed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chaudhury, M. K., & Whitesides, G. M. (1991) · Langmuir · doi:10.1021/la00053a033 · Cited by 658
Cited by
Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology
Love, J. C., Estroff, L. A., Kriebel, J. K., Nuzzo, R. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr0300789 · Cited by 8,282
Patterning self-assembled monolayers
Smith, R. K., Lewis, P. A., & Weiss, P. S. (2004) · Progress in Surface Science · doi:10.1016/j.progsurf.2003.12.001 · Cited by 807
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Patterning: Principles and Some New Developments
Geissler, M., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400835 · Cited by 641
PDMS-based microfluidic devices for biomedical applications
Fujii, T. (2002) · Microelectronic Engineering · doi:10.1016/s0167-9317(02)00494-x · Cited by 518
Printing meets lithography: Soft approaches to high-resolution patterning
Michel, B., Bernard, A., Bietsch, A., Delamarche, E., Geissler, M., Juncker, D., Kind, H., Renault, J.-P., Rothuizen, H., Schmid, H., et al. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.455.0697 · Cited by 471
Self-citationMicrocontact Printing: Limitations and Achievements
Perl, A., Reinhoudt, D. N., & Huskens, J. (2009) · Advanced Materials · doi:10.1002/adma.200801864 · Cited by 447
Bio-Microarray Fabrication Techniques—A Review
Barbulovic-Nad, I., Lucente, M., Sun, Y., Zhang, M., Wheeler, A. R., & Bussmann, M. (2006) · Critical Reviews in Biotechnology · doi:10.1080/07388550600978358 · Cited by 376
Nanofabrication: Conventional and nonconventional methods
Chen, Y., & Pépin, A. (2001) · ELECTROPHORESIS · doi:10.1002/1522-2683(200101)22:2<187::aid-elps187>3.0.co;2-0 · Cited by 301
Low-Level Detection of Viral Pathogens by a Surface-Enhanced Raman Scattering Based Immunoassay
Driskell, J. D., Kwarta, K. M., Lipert, R. J., Porter, M. D., Neill, J. D., & Ridpath, J. F. (2005) · Analytical Chemistry · doi:10.1021/ac0504159 · Cited by 295
Recent advances in microcontact printing
Quist, A. P., Pavlovic, E., & Oscarsson, S. (2005) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2847-z · Cited by 292
Metadata
- Authors
- Libioulle, L., Bietsch, A., Schmid, H., Michel, B., & Delamarche, E.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-12-29
- Volume
- 15
- Issue
- 2
- Pages
- 300-304
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2069386846
- Cited by
- 174
- References
- 1
- FWCI
- 8.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.