Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
The DOI matches its Crossref record.
Abstract
The kinetics of the L-lactide bulk polymerization was studied using tin(II) bis(2-ethylhexanoate) and zinc bis(2,2-dimethyl-3,5-heptanedionato-O,O'). Up to 80% conversion, the rate of polymerization using tin(II) bis(2-ethylhexanoate) is higher than that with the zinc-containing catalyst, while at conversions beyond 80%, the latter catalyst has the higher rate of polymerization. Crystallization of the newly formed polymer has an accelerating effect on the polymerization. The difference in the rate of polymerization at high conversions for the two catalysts is caused by a difference in crystallinity of the newly formed polymer. Contaminants in the catalyst and monomer are the true initiators in these L-lactide polymerizations. Initiation as well as polymerization proceeds through a Lewis acid catalyzed transesterification reaction between an activated lactone and a hydroxyl group.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Up until 80% conversion, the rate of polymerization using Sn(Oct)2 was higher than that with zinc-containing catalyst. However, at conversions over 80%, the latter catalyst gave the higher rate of polymerization.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [41]
Citations
Cites
Still being checked.
Cited by
Items 201–300 of 407
Degradable polymers for tissue engineering
van Dijkhuizen-Radersma, R., Moroni, L., van Apeldoorn, A. A., Zhang, Z., & Grijpma, D. W. (2008) · Elsevier eBooks · doi:10.1016/b978-0-12-370869-4.00007-0 · Cited by 42
Self-citationThe Properties of Poly(l-Lactide) Prepared by Different Synthesis Procedure
Ristić, I., Tanasić, L., Nikolic, L. B., Cakić, S. M., Ilić, O. Z., Radičević, R. Ž., & Budìnski‐Simendìć, J. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0297-1 · Cited by 41
Gong, F., Cheng, X., Wang, S., Wang, Y., Gao, Y. L., & Cheng, S. (2009) · Polymer · doi:10.1016/j.polymer.2009.04.033 · Cited by 36
Jia, L., Yin, L., Li, Y., Li, Q., Yang, J., Yu, J., Shi, Z., Fang, Q., & 曹阿民 (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400227 · Cited by 34
α‐Amino acids as initiators of ε‐caprolactone and L , L ‐lactide polymerization
Olędzka, E., Sokołowski, K., Sobczak, M., & Kołodziejski, W. (2011) · Polymer International · doi:10.1002/pi.3016 · Cited by 34
Polymerization of lactides and lactones
Deng, X., Yuan, M., Li, X., & Xiong, C. (2000) · European Polymer Journal · doi:10.1016/s0014-3057(99)00172-x · Cited by 34
Zhang, J. H., Zhuang, W., Zhang, Q., Liu, B., Wang, W., Hu, B. X., & Shen, J. (2007) · Polymer Composites · doi:10.1002/pc.20329 · Cited by 33
Poly(lactic acid)-based bioplastics
Zhang, J.-F., & Sun, X. S. (2005) · Elsevier eBooks · doi:10.1533/9781845690762.2.251 · Cited by 47
BIAN‐Fe(η6‐C6H6): Synthesis, characterization, and l‐lactide polymerization
Brown, L. A., Wekesa, F. S., Unruh, D. K., Findlater, M., & Long, B. K. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28688 · Cited by 35
Jeong, J. H., An, Y. H., Kang, Y. K., Nguyen, Q. T., Lee, H., & Novak, B. M. (2007) · Polyhedron · doi:10.1016/j.poly.2007.09.021 · Cited by 35
Polymerization of ε‐Caprolactone and its Copolymerization with γ‐Butyrolactone using Metal Complexes
Bhaw‐Luximon, A., Jhurry, D., Motala‐Timol, S., & Lochee, Y. (2005) · Macromolecular Symposia · doi:10.1002/masy.200590025 · Cited by 37
Paper to Plastics: An Interdisciplinary Summer Outreach Project in Sustainability
Tamburini, F. B., Kelly, T. R., Weerapana, E., & Byers, J. A. (2014) · Journal of Chemical Education · doi:10.1021/ed400892t · Cited by 33
Pappalardo, D., Annunziata, L., Pellecchia, C., Biesemans, M., & Willem, R. (2007) · Macromolecules · doi:10.1021/ma0623486 · Cited by 32
Ahmann, D. M., & Dorgan, J. R. (2007) · Industrial Biotechnology · doi:10.1089/ind.2007.3.218 · Cited by 34
Kinetic and thermodynamic considerations in the synthesis of a new three‐arm poly(ε‐caprolactone)
Balakrishnan, S., Krishnan, M. R., Dúbois, P., & Narayan, R. (2004) · Polymer Engineering and Science · doi:10.1002/pen.20145 · Cited by 31
Kwon, K. S., Nayab, S., & Jeong, J. H. (2014) · Polyhedron · doi:10.1016/j.poly.2014.09.032 · Cited by 32
Ring opening polymerization of lactide: kinetics and modeling
Metkar, S., Sathe, V. S., Rahman, I., Idage, B. B., & Idage, S. B. (2019) · Chemical Engineering Communications · doi:10.1080/00986445.2018.1550395 · Cited by 32
NMR analysis of the chain microstructure of biodegradable terpolymers with shape memory properties
Gebarowska, K., Kasperczyk, J., Dobrzyński, P., Scandola, M., Zini, E., & Li, S. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.022 · Cited by 33
Thevenon, A., Romain, C., Bennington, M. S., White, A., Davidson, H. J., Brooker, S., & Williams, C. K. (2016) · Angewandte Chemie · doi:10.1002/ange.201602930 · Cited by 30
Yuan, M., Li, X., Xiong, C., & Deng, X. (1999) · European Polymer Journal · doi:10.1016/s0014-3057(99)00025-7 · Cited by 33
Biodegradable Polymers as Drug Carrier Systems
Domb, A. J., Kumar, N., Sheskin, T., Bentolila, A., Slager, J., & Teomim, D. (2001) · CRC Press eBooks · doi:10.1201/9780203904671.ch4 · Cited by 31
Lee, W., Iwata, T., Abe, H., & Doi, Y. (2000) · Macromolecules · doi:10.1021/ma001016c · Cited by 29
Synthesis and characterization of a random terpolymer of L ‐lactide, ϵ‐caprolactone and glycolide
Srisa‐ard, M., Molloy, R., Molloy, N., Siripitayananon, J., & Sriyai, M. (2001) · Polymer International · doi:10.1002/pi.713 · Cited by 28
Selectivity as a measure of “livingness” of the polymerization of cyclic esters
Penczek, S., & Duda, A. (1996) · Macromolecular Symposia · doi:10.1002/masy.19961070103 · Cited by 28
NOTE: Polymerization of Cyclic Esters Using Aminoacid Initiators
Sobczak, M., Olędzka, E., & Kołodziejski, W. (2008) · Journal of Macromolecular Science Part A · doi:10.1080/10601320802300925 · Cited by 27
The structure of crystallisable copolymers of l-lactide, ε-caprolactone and glycolide
Channuan, W., Siripitayananon, J., Molloy, R., Sriyai, M., Davis, F. J., & Mitchell, G. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.097 · Cited by 27
Likhitsup, A., Parthiban, A., & Chai, C. L. L. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22362 · Cited by 28
Albertsson, A., & Varma, I. K. (2002) · Wiley eBooks · doi:10.1002/3527600035.bpol4002 · Cited by 29
Eissa, A. M., Khosravi, E., & Cimecioglu, A. L. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.012 · Cited by 33
Ultra‐high molecular weight poly(ε‐caprolactone) by means of diphenyl bismuth bromide
Kricheldorf, H. R., Behnken, G., & Schwarz, G. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22429 · Cited by 28
Yu, H., Guo, X., Qi, X., Liu, P., Shen, X., & Duan, Y. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3237-9 · Cited by 26
Miktoarm star copolymers of poly(ϵ‐caprolactone) from a novel heterofunctional initiator
Priftis, D., Pitsikalis, M., & Hadjichristidis, N. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22261 · Cited by 32
Pastusiak, M., Dobrzyński, P., Kaczmarczyk, B., & Kasperczyk, J. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24683 · Cited by 25
Thermal Properties of Electrospun Poly(Lactic Acid) Membranes
Sencadas, V., Costa, C. M., Botelho, G., Caparrós, C., Ribeiro, C., Ribelles, J. L. G., & Lanceros-Méndez, S. (2012) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2011.597325 · Cited by 31
Kinetics of the ring‐opening polymerization of D , L ‐lactide using zinc (II) octoate as catalyst
Mazarro, R., Gracia, I., Rodríguez, J. F., Storti, G., & Morbidelli, M. (2011) · Polymer International · doi:10.1002/pi.3182 · Cited by 30
Schäfer, P. M., Dankhoff, K., Rothemund, M., Ksiazkiewicz, A. N., Pich, A., Schobert, R., Weber, B., & Herres‐Pawlis, S. (2019) · ChemistryOpen · doi:10.1002/open.201900199 · Cited by 27
Yu, F., & Zhuo, R. (2004) · Polymer Journal · doi:10.1295/polymj.36.28 · Cited by 25
Unconventional Amphiphilic Polymers Based on Chiral Polyethylene Oxides
Janssen, H. M., Peeters, E., van Zundert, M. F., van Genderen, M. H. P., & Meijer, E. W. (1997) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199701221 · Cited by 25
Ring-Opening Polymerization of Lactide Using Microwave and Conventional Heating
Singla, P., Kaur, P., Mehta, R., Berek, D., & Upadhyay, S. (2012) · Procedia Chemistry · doi:10.1016/j.proche.2012.06.025 · Cited by 27
Yu, D., Sun, P., Tang, Z., Li, Z., & Huang, H. (2010) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20424 · Cited by 24
Sn(OTf) 2 catalyzed continuous flow ring-opening polymerization of ε-caprolactone
Zhu, N., Zhang, Z., Feng, W., Zeng, Y., Li, Z., Fang, Z. D., Zhang, K., Li, Z., & Guo, K. (2015) · RSC Advances · doi:10.1039/c5ra02583d · Cited by 23
Houvenagel, S., Moine, L., Picheth, G. F., Dejean, C., Brûlet, A., Chennevière, A., Faugeras, V., Huang, N., Couture, O., & Tsapis, N. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00506 · Cited by 23
ROP of Cyclic Esters. Mechanisms of Ionic and Coordination Processes
Duda, A. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00104-7 · Cited by 25
Characterization of progesterone loaded biodegradable blend polymeric nanoparticles
Leimann, F. V., Biz, M. H., Kaufmann, K. C., Maia, W. J., Honçalves, O. H., Cardozo‐Filho, L., Sayer, C., & de Araújo, P. H. H. (2015) · Ciência Rural · doi:10.1590/0103-8478cr20141288 · Cited by 25
Bismuth halide‐catalyzed polymerizations of ε‐caprolactone
Lahcini, M., Schwarz, G., & Kricheldorf, H. R. (2008) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23054 · Cited by 24
Lang, M., & Chu, C. (2001) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.10030 · Cited by 23
Li, H., Xu, Q., Chen, J.-X., Cheng, M.-L., Zhang, Y., Zhang, W., Lang, J., & Shen, Q. (2004) · Journal of Organometallic Chemistry · doi:10.1016/j.jorganchem.2004.07.044 · Cited by 23
Singh, A. K., Naskar, A. K., Haynes, D., Drews, M. J., & Smith, D. W. (2010) · Polymer International · doi:10.1002/pi.2982 · Cited by 23
Ring‐opening polymerization of ε‐caprolactone via the bismuth‐2‐mercaptoethanol complex
Kricheldorf, H. R., Behnken, G., & Schwarz, G. (2006) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21415 · Cited by 22
Biodegradable Polymers as Drug Carrier Systems
Domb, A. J., & Khan, W. (2013) · CRC Press eBooks · doi:10.1201/b13757-6 · Cited by 22
Bismuth‐Triflate‐Catalyzed Polymerizations of ε‐Caprolactone
Lahcini, M., Qayouh, H., Yashiro, T., Weidner, S. M., & Kricheldorf, H. R. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000517 · Cited by 21
Kricheldorf, H. R., & Weidner, S. M. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.07.003 · Cited by 21
Bulk polymerization of lactides initiated by aluminum isopropoxide. I. Mechanism and kinetics
Degée, P., Dúbois, P., & Jérôme, R. (1997) · Macromolecular Symposia · doi:10.1002/masy.19971230108 · Cited by 22
Kricheldorf, H. R., Behnken, G., Schwarz, G., & KOPF, J. (2008) · Macromolecules · doi:10.1021/ma071797i · Cited by 22
Microwave Synthesis of Poly(L-lactic acid)
Pandey, A., & Aswath, P. B. (2008) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856208x393482 · Cited by 21
Gao, B., Li, D., Li, X., Duan, R., Pang, X., Cui, Y., Duan, Q., & Chen, X. (2015) · Catalysis Science & Technology · doi:10.1039/c5cy00982k · Cited by 22
Hermann, A., Hill, S., Metz, A., Heck, J., Hoffmann, A., Hartmann, L., & Herres‐Pawlis, S. (2020) · Angewandte Chemie · doi:10.1002/ange.202008473 · Cited by 20
Nan, A., Turcu, R. P., & Liebscher, J. (2012) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.25920 · Cited by 25
Bruckmoser, J., Henschel, D., Vagin, S. I., & Rieger, B. (2022) · Catalysis Science & Technology · doi:10.1039/d2cy00436d · Cited by 22
Synthesis of cyclic poly( l ‐lactide) catalyzed by Bismuth Salicylates—A combination of two drugs
Kricheldorf, H. R., Weidner, S. M., & Scheliga, F. (2019) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29473 · Cited by 19
Słomkowski, S., Sosnowski, S., & Gadzinowski, M. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00172-9 · Cited by 20
Incorporation of salicylates into poly(l-lactide)
Sup�r, H., Grijpma, D. W., & Pennings, A. J. (1994) · Polymer Bulletin · doi:10.1007/bf00973895 · Cited by 19
Self-citationRole of Dicumyl Peroxide on Toughening PLLA via Dynamic Vulcanization
Liu, L., Hou, J., Wang, L., Zhang, J., & Duan, Y. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02122 · Cited by 19
Telechelic poly(ε-caprolactones) with tethered mixed ligand ruthenium(II) chromophores
Farah, A. A., & Pietro, W. J. (2004) · Canadian Journal of Chemistry · doi:10.1139/v03-215 · Cited by 18
Production of optically pure poly(lactic acid) from lactic acid
Yoo, D. K., & Kim, D. (2009) · Polymer Bulletin · doi:10.1007/s00289-009-0115-2 · Cited by 17
D’Auria, I., Lamberti, M., Mazzeo, M., Milione, S., & Pellecchia, C. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26969 · Cited by 17
Weidner, S. M., Meyer, A., & Kricheldorf, H. R. (2023) · Polymer · doi:10.1016/j.polymer.2023.126355 · Cited by 19
LIU, Y., SCHULZE, M., & Albertsson, A. (1998) · Journal of Macromolecular Science Part A · doi:10.1080/10601329808001974 · Cited by 23
Crystallinity-Independent Toughness in Renewable Poly( l -lactide) Triblock Plastics
Krajovic, D. M., Haugstad, G. D., & Hillmyer, M. A. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02580 · Cited by 17
Huang, S., Li, H., Yu, D., Jiang, S., Chen, X., & An, L. (2013) · CrystEngComm · doi:10.1039/c3ce26943d · Cited by 16
Hot-drawing of poly(lactide) networks
Penning, J. P., Grijpma, D. W., & Pennings, A. J. (1993) · Journal of Materials Science Letters · doi:10.1007/bf00420216 · Cited by 16
Self-citationPeng, F., Ling, J., Shen, Z., & Zhu, W. (2005) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2004.12.020 · Cited by 16
Ionic and Coordination Ring‐Opening Polymerization
Penczek, S., Duda, A., Kubisa, P., & Słomkowski, S. (2007) · Wiley eBooks · doi:10.1002/9783527631421.ch4 · Cited by 16
Polyesters from Large Lactones
Albertsson, A., Varma, I. K., & Srivastava, R. K. (2009) · Wiley eBooks · doi:10.1002/9783527628407.ch11 · Cited by 19
Gorrasi, G., Vertuccio, L., Annunziata, L., Pellecchia, C., & Pappalardo, D. (2010) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2009.11.006 · Cited by 15
Kang, Y. K., Jeong, J. H., Lee, N. Y., Lee, Y. T., & Lee, H. (2010) · Polyhedron · doi:10.1016/j.poly.2010.05.009 · Cited by 18
Metz, A., Heck, J., Gohlke, C., Kröckert, K. W., Louven, Y., McKeown, P., Hoffmann, A., Jones, M. D., & Herres‐Pawlis, S. (2017) · Inorganics · doi:10.3390/inorganics5040085 · Cited by 16
Ju, M., Gong, F., Cheng, S., & Gao, Y. L. (2011) · International Journal of Polymer Science · doi:10.1155/2011/381076 · Cited by 16
Ono, R., Atarashi, H., Yamazaki, S., & Kimura, K. (2020) · Polymer · doi:10.1016/j.polymer.2020.122403 · Cited by 14
Samsuri, M., Iswaldi, I., & Purnama, P. (2021) · Polymers · doi:10.3390/polym13122018 · Cited by 14
Ren, H., Ying, H., Ouyang, P., Xu, P., & Liu, J. (2012) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2012.08.020 · Cited by 14
Aliphatic Polyester Formation, Mechanisms of
Duda, A., & Penczek, S. (2002) · Wiley eBooks · doi:10.1002/3527600035.bpol3b12 · Cited by 21
Synthesis and Characterization of Poly(L-Lactic acid)/Clay Nanocomposite via Metal-Free Process
Başaran, İ., & ORAL, A. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2013.814146 · Cited by 15
Wang, H., Yao, Z., Li, Z., Zhu, Y., Zhang, C., Luo, Z., Guo, T., Gao, Y. M., Zhang, L., & Guo, K. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109570 · Cited by 13
Kricheldorf, H. R., & Mahler, A. (1996) · Journal of Macromolecular Science Part A · doi:10.1080/10601329608010898 · Cited by 13
Maeda, Y., Nakayama, A., Arvanitoyannis, I., Kawasaki, N., Hayashi, K., Yamamoto, N., & Aiba, S. (2000) · Polymer Journal · doi:10.1295/polymj.32.307 · Cited by 13
Control of Enzymatic Degradation of Microbial Polyesters by Plasma Modification
Ryou, J., Ha, C., Kim, J., & Lee, W. (2003) · Macromolecular Bioscience · doi:10.1002/mabi.200390004 · Cited by 13
Synthesis of medical grade PLLA, PDLLA, and PLGA by a reactive extrusion polymerization
Régibeau, N., Hurlet, J., Tilkin, R. G., Lombart, F., Heinrichs, B., & Grandfils, C. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101208 · Cited by 13
Pack, J. W., Kim, S. H., Park, S. Y., Lee, Y.-W., & Kim, Y. (2003) · Macromolecules · doi:10.1021/ma034341j · Cited by 12
Sustainable Routes for Synthesis of Poly(ε-Caprolactone): Prospects in Chemical Industries
Das, M., Mandal, B., & Katiyar, V. (2020) · Materials horizons · doi:10.1007/978-981-15-1251-3_2 · Cited by 11
The Contribution of Commercial Metal Amides to the Chemical Recycling of Waste Polyesters
Santulli, F., Lamberti, M., Annunziata, A., Lastra, R. C., & Mazzeo, M. (2022) · Catalysts · doi:10.3390/catal12101193 · Cited by 12
Svoboda, R., Machotová, J., Krbal, M., Jezbera, D., Nalezinková, M., Loskot, J., & Bezrouk, A. (2023) · Polymer · doi:10.1016/j.polymer.2023.125978 · Cited by 12
Polymerization of Lactides and Lactones by Metal-Free Initiators
Li, H., Wu, J. L., Brunel, S., Monnet, C., Baudry, R., & Perchec, P. L. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie058022n · Cited by 11
study on hydrolytic kinetics of Langmuir monolayers of biodegradable polylactide derivatives
Lee, J.-K., Ryou, J., Lee, W., Park, C.-Y., Park, S.-B., & Min, S.-K. (2003) · Macromolecular Research · doi:10.1007/bf03218979 · Cited by 11
Synthetic biodegradable medical polyesters
Li, S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100372-5.00002-7 · Cited by 15
Synthesis of poly(D-lactide) with different molecular weight via melt-polymerization
Purnama, P., Jung, Y., Hong, C. H., Han, D. S., & Kim, S. H. (2012) · Macromolecular Research · doi:10.1007/s13233-012-0072-8 · Cited by 16
The synthesis and polymerization of oxo‐crown ethers
Peeters, E., Janssen, H. M., van Zundert, M. F., van Genderen, M. H. P., & Meijer, E. W. (1996) · Acta Polymerica · doi:10.1002/actp.1996.010471103 · Cited by 11
Progress in Catalytic Ring-Opening Polymerization of Biobased Lactones
Al-Shok, L., Haddleton, D. M., & Adams, F. (2022) · Advances in Polymer Science · doi:10.1007/12_2021_111 · Cited by 10
Chen, H., Xue, Q., Li, Z., Sun, L., & Zhang, Q. (2010) · Polymer · doi:10.1016/j.polymer.2010.11.041 · Cited by 10
Metal Complexes as Catalysts for Polymerization Reactions
Gibson, V. C., & Marshall, E. L. (2003) · Elsevier eBooks · doi:10.1016/b0-08-043748-6/09010-1 · Cited by 13
Metadata
- Authors
- Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J.
- ORCID
- Grijpma, D. W.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1992-11
- Volume
- 25
- Issue
- 24
- Pages
- 6419-6424
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2090994478
- Cited by
- 407
- References
- 0
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 8 · 2023: 6 · 2022: 10 · 2021: 3 · 2020: 13 · 2019: 13 · 2018: 6 · 2017: 10 · 2016: 12 · 2015: 14 · 2014: 7 · 2013: 12 · 2012: 18
- FWCI
- 6.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Carbon dioxide utilization in catalysis
- Keywords
- L-lactide, bulk polymerization, Lewis acid catalysis, polymerization kinetics, polymerization mechanism, polymer crystallization, catalyst contamination, transesterification, polylactic acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.