The DOI matches its Crossref record.
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Abstract
The kinetics of the L-lactide bulk polymerization was studied using tin(II) bis(2-ethylhexanoate) and zinc bis(2,2-dimethyl-3,5-heptanedionato-O,O'). Up to 80% conversion, the rate of polymerization using tin(II) bis(2-ethylhexanoate) is higher than that with the zinc-containing catalyst, while at conversions beyond 80%, the latter catalyst has the higher rate of polymerization. Crystallization of the newly formed polymer has an accelerating effect on the polymerization. The difference in the rate of polymerization at high conversions for the two catalysts is caused by a difference in crystallinity of the newly formed polymer. Contaminants in the catalyst and monomer are the true initiators in these L-lactide polymerizations. Initiation as well as polymerization proceeds through a Lewis acid catalyzed transesterification reaction between an activated lactone and a hydroxyl group.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Up until 80% conversion, the rate of polymerization using Sn(Oct)2 was higher than that with zinc-containing catalyst. However, at conversions over 80%, the latter catalyst gave the higher rate of polymerization.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [41]
Citations
Cites
Still being checked.
Cited by
Chemical Routes for the Transformation of Biomass into Chemicals
Corma, A., Iborra, S., & Velty, A. (2007) · Chemical Reviews · doi:10.1021/cr050989d · Cited by 5,970
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
“The standard catalyst for the synthesis of high molecular weight polylactides is Sn(II) (2ethyl-hexanoate) [47–49].”
BackgroundBiocompatible Initiators for Lactide Polymerization
Platel, R., Hodgson, L., & Williams, C. (2008) · Polymer Reviews · doi:10.1080/15583720701834166 · Cited by 706
A perspective approach to sustainable routes for non-isocyanate polyurethanes
Cornille, A., Auvergne, R., Figovsky, O., Boutevin, B., & Caillol, S. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.11.027 · Cited by 531
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Aliphatic Polyesters: Synthesis, Properties and Applications
Albertsson, A.-C., & Varma, I. K. (2002) · Advances in Polymer Science · doi:10.1007/3-540-45734-8_1 · Cited by 500
Kowalski, A., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma000125o · Cited by 482
Polylactones 48. SnOct2-Initiated Polymerizations of Lactide: A Mechanistic Study
Kricheldorf, H. R., Kreiser-Saunders, I., & Stricker, A. (2000) · Macromolecules · doi:10.1021/ma991181w · Cited by 467
Polymerization of l,l-Lactide Initiated by Aluminum Isopropoxide Trimer or Tetramer
Kowalski, A., Duda, A., & Penczek, S. (1998) · Macromolecules · doi:10.1021/ma971737k · Cited by 470
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., & Ueda, K. (2003) · Chemistry of Materials · doi:10.1021/cm020953r · Cited by 453
Polylactic acid (PLA): Research, development and industrialization
Pang, X., Zhuang, X., Tang, Z., & Chen, X. (2010) · Biotechnology Journal · doi:10.1002/biot.201000135 · Cited by 435
Amgoune, A., Thomas, C. M., Roisnel, T., & Carpentier, J. (2006) · Chemistry – A European Journal · doi:10.1002/chem.200500856 · Cited by 423
Thermal and mechanical properties of chemical crosslinked polylactide (PLA)
Yang, S.-L., Wu, Z.-H., Yang, W., & Yang, M.-B. (2008) · Polymer Testing · doi:10.1016/j.polymertesting.2008.08.009 · Cited by 412
Polylactones: 31. Sn(II)octoate-initiated polymerization of L-lactide: a mechanistic study
Kricheldorf, H. R., Kreiser-Saunders, I., & Boettcher, C. (1995) · Polymer · doi:10.1016/0032-3861(95)93928-f · Cited by 411
Kowalski, A., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma9906940 · Cited by 407
Single site catalysts for stereoselective ring-opening polymerization of lactides
Dijkstra, P. J., Du, H., & Feijen, J. (2011) · Polym. Chem. · doi:10.1039/c0py00204f · Cited by 400
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
Syntheses and application of polylactides
Kricheldorf, H. R. (2001) · Chemosphere · doi:10.1016/s0045-6535(00)00323-4 · Cited by 343
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
High Molecular Weight Polylactic Acid Polymers
Hartmann, M. H. (1998) · Biopolymers from Renewable Resources · doi:10.1007/978-3-662-03680-8_15 · Cited by 307
New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
Sinha Ray, S., Yamada, K., Okamoto, M., Fujimoto, Y., Ogami, A., & Ueda, K. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.021 · Cited by 317
Dove, A. P. (2008) · Chemical Communications · doi:10.1039/b813059k · Cited by 310
L (+) lactic acid fermentation and its product polymerization
Srivastava, A., Narayanan, N., & Roychoudhury, P. K. (2004) · Electronic Journal of Biotechnology · doi:10.2225/vol7-issue2-fulltext-7 · Cited by 280
Mecerreyes, D., Jérôme, R., & Dubois, P. (2007) · Advances in Polymer Science · doi:10.1007/3-540-49196-1_1 · Cited by 272
Polymerization of l,l-Dilactide Initiated by Tin(II) Butoxide
Kowalski, A., Libiszowski, J., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma991751s · Cited by 272
Witzke, D. R., Narayan, R., & Kolstad, J. J. (1997) · Macromolecules · doi:10.1021/ma970631m · Cited by 263
Homogeneous and Heterogeneous Gold Catalysis for Materials Science
Hendrich, C. M., Sekine, K., Koshikawa, T., Tanaka, K., & Hashmi, A. S. K. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00824 · Cited by 246
Yamashita, M., Takemoto, Y., Ihara, E., & Yasuda, H. (1996) · Macromolecules · doi:10.1021/ma951400n · Cited by 247
Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications
Teixeira, S., Eblagon, K. M., Miranda, F., R. Pereira, M. F., & Figueiredo, J. L. (2021) · C · doi:10.3390/c7020042 · Cited by 237
Synthesis of polylactides with different molecular weights
Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00076-8 · Cited by 237
Shell crosslinked polymer assemblies: Nanoscale constructs inspired from biological systems
Wooley, K. L. (2000) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000501)38:9<1560::aid-pola20>3.0.co;2-f · Cited by 237
Recent Advances in Ring-Opening Polymerization of Lactones and Related Compounds
Löfgren, A., Albertsson, A.-C., Dubois, P., & Jérôme, R. (1995) · Journal of Macromolecular Science, Part C · doi:10.1080/15321799508014594 · Cited by 235
Dove, A. P., Gibson, V. C., Marshall, E. L., Rzepa, H. S., White, A. J. P., & Williams, D. J. (2006) · Journal of the American Chemical Society · doi:10.1021/ja061400a · Cited by 223
Nam, J. Y., Okamoto, M., Okamoto, H., Nakano, M., Usuki, A., & Matsuda, M. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.066 · Cited by 219
Biernesser, A. B., Li, B., & Byers, J. A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407920d · Cited by 217
Poirier, V., Roisnel, T., Carpentier, J.-F., & Sarazin, Y. (2009) · Dalton Transactions · doi:10.1039/b917799j · Cited by 219
Zhang, X., MacDonald, D. A., Goosen, M. F. A., & McAuley, K. B. (1994) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1994.080321519 · Cited by 214
POLY(p-DIOXANONE) AND ITS COPOLYMERS
Yang, K.-K., Wang, X.-L., & Wang, Y.-Z. (2002) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-120006453 · Cited by 209
Pappalardo, D., Annunziata, L., & Pellecchia, C. (2009) · Macromolecules · doi:10.1021/ma9010439 · Cited by 199
Titanium Alkoxides as Initiators for the Controlled Polymerization of Lactide
Kim, Y., Jnaneshwara, G. K., & Verkade, J. G. (2003) · Inorganic Chemistry · doi:10.1021/ic026139n · Cited by 199
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Self-citationInfluence of residual monomers and metals on poly (l-lactide) thermal stability
Cam, D., & Marucci, M. (1997) · Polymer · doi:10.1016/s0032-3861(96)00711-2 · Cited by 192
Control of Biodegradability of Polylactide via Nanocomposite Technology
Ray, S. S., Yamada, K., Okamoto, M., & Ueda, K. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200390013 · Cited by 189
John, A., & Ghosh, P. (2010) · Dalton Transactions · doi:10.1039/c002475a · Cited by 185
Du, H., Pang, X., Yu, H., Zhuang, X., Chen, X., Cui, D., Wang, X., & Jing, X. (2007) · Macromolecules · doi:10.1021/ma062194u · Cited by 184
Ryner, M., Stridsberg, K., Albertsson, A.-C., von Schenck, H., & Svensson, M. (2001) · Macromolecules · doi:10.1021/ma002096n · Cited by 182
Kowalski, A., Libiszowski, J., Biela, T., Cypryk, M., Duda, A., & Penczek, S. (2005) · Macromolecules · doi:10.1021/ma050752j · Cited by 179
Darensbourg, D. J., & Karroonnirun, O. (2010) · Macromolecules · doi:10.1021/ma101784y · Cited by 178
Interstellar molecules: guides for new chemistry
Mandal, S. K., & Roesky, H. W. (2010) · Chemical Communications · doi:10.1039/c0cc01003k · Cited by 173
van Dijk-Wolthuls, W. N. E., Tsang, S. K. Y., & Kettenes-van den BoschW.E. Hennink, J. J. (1997) · Polymer · doi:10.1016/s0032-3861(97)00189-4 · Cited by 169
Cooper-White, J. J., & Mackay, M. E. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19990801)37:15<1803::aid-polb5>3.0.co;2-m · Cited by 161
Dong, C.-M., Qiu, K.-Y., Gu, Z.-W., & Feng, X.-D. (2001) · Macromolecules · doi:10.1021/ma010005w · Cited by 161
Polylactides ‐ synthesis, characterization and medical application
Kricheldorf, H. R., Kreiser‐Saunders, I., Jürgens, C., & Wolter, D. (1996) · Macromolecular Symposia · doi:10.1002/masy.19961030110 · Cited by 160
Thevenon, A., Romain, C., Bennington, M. S., White, A. J. P., Davidson, H. J., Brooker, S., & Williams, C. K. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602930 · Cited by 151
Dubois, P., Ropson, N., Jérôme, R., & Teyssié, P. (1996) · Macromolecules · doi:10.1021/ma951738h · Cited by 151
M�ller, M., K�nge, R., & Hedrick, J. L. (2000) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000601)38:11<2067::aid-pola150>3.0.co;2-1 · Cited by 151
Kim, Y., & Verkade, J. G. (2002) · Organometallics · doi:10.1021/om0110686 · Cited by 147
Synthesis of Poly(lactide)s with Modified Thermal and Mechanical Properties
Becker, J. M., Pounder, R. J., & Dove, A. P. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000088 · Cited by 146
Chain entanglement, mechanical properties and drawability of poly(lactide)
Grijpma, D. W., Penning, J. P., & Pennings, A. J. (1994) · Colloid & Polymer Science · doi:10.1007/bf00652375 · Cited by 158
Self-citationRubber toughening of poly(lactide) by blending and block copolymerization
Grijpma, D. W., Hofslot, R. D. A. V., Super, H. T. J., Nijenhuis, A. J., & Pennings, A. J. (1994) · Polymer Engineering and Science · doi:10.1002/pen.760342205 · Cited by 148
Self-citation(Co)polymers of L ‐lactide, 1. Synthesis, thermal properties and hydrolytic degradation
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950515 · Cited by 162
Self-citationTakashima, Y., Nakayama, Y., Watanabe, K., Itono, T., Ueyama, N., Nakamura, A., Yasuda, H., Harada, A., & Okuda, J. (2002) · Macromolecules · doi:10.1021/ma0204711 · Cited by 136
Polydioxanone-based bio-materials for tissue engineering and drug/gene delivery applications
Goonoo, N., Jeetah, R., Bhaw‐Luximon, A., & Jhurry, D. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.05.024 · Cited by 135
Breyfogle, L. E., Williams, C. K., Young, V. G., Hillmyer, M. A., & Tolman, W. B. (2005) · Dalton Transactions · doi:10.1039/b507014g · Cited by 133
Improvement of heat stability of poly(l-lactic acid) by radiation-induced crosslinking
Mitomo, H., Kaneda, A., Quỳnh, T. M., Nagasawa, N., & Yoshii, F. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.088 · Cited by 130
Yeh, J., Wu, C.-J., Tsou, C., Chai, W., Chow, J., Huang, C., Chen, K., & Wu, C.-S. (2009) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550902824390 · Cited by 135
Bulk Ring-Opening Polymerization of Lactides Initiated by Ferric Alkoxides
Wang, X., Liao, K., Quan, D., & Wu, Q. (2005) · Macromolecules · doi:10.1021/ma047545o · Cited by 142
Pyrolysis kinetics of poly(l-lactide) with carboxyl and calcium salt end structures
Fan, Y., Nishida, H., Hoshihara, S., Shirai, Y., Tokiwa, Y., & Endo, T. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00374-9 · Cited by 128
Dobrzyński, P., Kasperczyk, J., & Bero, M. (1999) · Macromolecules · doi:10.1021/ma981969z · Cited by 133
Novel Degradable Poly(Ethylene Glycol) Hydrogels for Controlled Release of Protein
Zhao, X., & Harris, J. M. (1998) · Journal of Pharmaceutical Sciences · doi:10.1021/js980065o · Cited by 122
Syntheses of Biodegradable and Biocompatible Polymers by Means of Bismuth Catalysts
Kricheldorf, H. R. (2009) · Chemical Reviews · doi:10.1021/cr900029e · Cited by 121
Crystallization, Stability, and Enzymatic Degradation of Poly( l -lactide) Thin Film
Kikkawa, Y., Abe, H., Iwata, T., Inoue, Y., & Doi, Y. (2002) · Biomacromolecules · doi:10.1021/bm015623z · Cited by 121
Use of Monocarboxylic Iron Derivatives in the Ring-Opening Polymerization of l-Lactide
Stolt, M., & Södergård, A. (1999) · Macromolecules · doi:10.1021/ma9902753 · Cited by 119
Functional biorenewable polyesters from carvone-derived lactones
Lowe, J. R., Martello, M. T., Tolman, W. B., & Hillmyer, M. A. (2010) · Polymer Chemistry · doi:10.1039/c0py00283f · Cited by 117
Reactive Compatibilization of Poly( l -lactide) and Conjugated Soybean Oil
Gramlich, W. M., Robertson, M. L., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma902449x · Cited by 121
Hiltunen, K., Seppälä, J. V., & Härkönen, M. (1997) · Macromolecules · doi:10.1021/ma960919w · Cited by 113
Green Copolymers Based on Poly(Lactic Acid)—Short Review
Stefaniak, K., & Masek, A. (2021) · Materials · doi:10.3390/ma14185254 · Cited by 109
Hermann, A., Hill, S., Metz, A., Heck, J., Hoffmann, A., Hartmann, L., & Herres‐Pawlis, S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202008473 · Cited by 109
Syntheses of polylactides by means of tin catalysts
Kricheldorf, H. R., & Weidner, S. M. (2022) · Polymer Chemistry · doi:10.1039/d2py00092j · Cited by 116
Chen, G., Kim, H., Kim, E. S., & Yoon, J. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.07.022 · Cited by 105
Synthesis of lactide from oligomeric PLA: Effects of temperature, pressure, and catalyst
Yoo, D. K., Kim, D., & Lee, D. S. (2006) · Macromolecular Research · doi:10.1007/bf03218717 · Cited by 112
Thermal stability of poly (l-lactide): influence of end protection by acetyl group
Fan, Y., Nishida, H., Shirai, Y., & Endo, T. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.10.004 · Cited by 104
Singh, V., & Tiwari, M. (2010) · International Journal of Polymer Science · doi:10.1155/2010/652719 · Cited by 115
Elastomeric Hydrolyzable Porous Scaffolds: Copolymers of Aliphatic Polyesters and a Polyether−ester
Odelius, K., Plikk, P., & Albertsson, A. (2005) · Biomacromolecules · doi:10.1021/bm050190b · Cited by 101
Chisholm, M. H., & Eilerts, N. W. (1996) · Chemical Communications · doi:10.1039/cc9960000853 · Cited by 103
Kricheldorf, H. R., & Lee, S. (1995) · Polymer · doi:10.1016/0032-3861(95)94350-3 · Cited by 103
Synthesis of copolymers of 1,3‐dioxan‐2‐one and oxepan‐2‐one using coordination catalysts
Albertsson, A., & Eklund, M. (1994) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1994.080320207 · Cited by 98
Degée, P., Dúbois, P., Jacobsen, S., Fritz, H. ‐., & Jérôme, R. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990715)37:14<2413::aid-pola15>3.0.co;2-# · Cited by 98
He, C., Sun, J., Zhao, T., Hong, Z., Zhuang, X., Chen, X., & Jing, X. (2005) · Biomacromolecules · doi:10.1021/bm050627f · Cited by 98
Schwach, G., Coudane, J., Engel, R., & Vert, M. (1994) · Polymer Bulletin · doi:10.1007/bf00973910 · Cited by 100
Local piezoelectric activity of single poly(L-lactic acid) (PLLA) microfibers
Sencadas, V., Ribeiro, C., Heredia, A., Bdikin, I. K., Kholkin, A. L., & Lanceros-Méndez, S. (2012) · Applied Physics A · doi:10.1007/s00339-012-7095-z · Cited by 97
Preparation and Characterization of Substituted Polylactides
Yin, M., & Baker, G. L. (1999) · Macromolecules · doi:10.1021/ma9907183 · Cited by 96
Nagahata, R., Sano, D., Suzuki, H., & Takeuchi, K. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200600715 · Cited by 96
Nikolic, L. B., Ristić, I., Adnadjevic, B. K., Nikolić, V. D., Jovanović, J., & Stankovic, M. Z. (2010) · Sensors · doi:10.3390/s100505063 · Cited by 110
Moon, S. I., & Kimura, Y. (2003) · Polymer International · doi:10.1002/pi.960 · Cited by 93
Metadata
- Authors
- Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J.
- ORCID
- Grijpma, D. W.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1992-11
- Volume
- 25
- Issue
- 24
- Pages
- 6419-6424
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2090994478
- Cited by
- 407
- References
- 0
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 8 · 2023: 6 · 2022: 10 · 2021: 3 · 2020: 13 · 2019: 13 · 2018: 6 · 2017: 10 · 2016: 12 · 2015: 14 · 2014: 7 · 2013: 12 · 2012: 18
- FWCI
- 6.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Carbon dioxide utilization in catalysis
- Keywords
- L-lactide, bulk polymerization, Lewis acid catalysis, polymerization kinetics, polymerization mechanism, polymer crystallization, catalyst contamination, transesterification, polylactic acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.