Nanocomposites of Chitin Whiskers from Riftia Tubes and Poly(caprolactone)
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Nanocomposite materials were obtained from a colloidal suspension of high aspect ratio β chitin whiskers as the reinforcing phase and poly(caprolactone) as the matrix. The chitin whiskers, prepared by acid hydrolysis of Riftia tubes, consisted of slender parallelepiped rods with an aspect ratio close to 120. A procedure was optimized to prepare a latex of poly(caprolactone). After mixing and stirring the two aqueous suspensions, solid films were obtained by either freeze-drying and hot-pressing or casting and evaporating the preparations. An amorphous poly(styrene- co -butyl acrylate) latex was also used as a model matrix. The thermal and mechanical properties of the resulting films were evaluated. The reinforcing effect of chitin whiskers is discussed on the basis of different types of mechanical models, and it is concluded that these whiskers form a rigid network assumed to be governed by a percolation mechanism. The formation of this network allows the thermal stabilization of the material for temperatures higher than the melting temperature of the poly(caprolactone).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Tm values are reported to be nearly independent of the filler content in PCL/chitin whiskers nanocomposites [143] as well as in POE filled with tunicin whiskers [140].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [143]
In the citing paper
“The degree of crystallinity of PCL decreased with the addition of Riftia tubes chitin whiskers [143].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [143]
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348
Introduction to Percolation Theory
Stauffer, D., & Aharony, A. (1985) · Taylor & Francis eBooks · doi:10.4324/9780203211595 · Cited by 3,727
An Introduction to Composite Materials
Clyne, T. W., & Hull, D. (2019) · Cambridge University Press eBooks · doi:10.1017/9781139050586 · Cited by 3,018
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Self-citationProperties of thermoplastic blends: starch–polycaprolactone
Averous, L. (2000) · Polymer · doi:10.1016/s0032-3861(99)00636-9 · Cited by 566
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Self-citationTashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Research works printed but not linked: 12
- Komarek A., 2000, Annu. Technol. Conf. Soc. Plast. Eng.
- Kleemiss M., 2000, PCT Int. Appl., 34
- Muzzarelli R. A. A., 1973, Naturally Chelating Polymers
- Muzzarelli R. A., 1977, Chitin, 55
- Tsaï S. W., 1968, Composite Materials Workshop; Technomic: Stamford, CT
- Xu W., 1994, Scanning Microsc., 8, 499
- Ouali N., 1991, Plast. Rubber Comput. Process. Appl., 16, 55
- Garcia-Ramirez M., 1995, Part B: Polym. Phys
- Dufresne A., 2000, Macromolecules, 33, 3008
- Dufresne A., 1998, B: Polym. Phys
- Dufresne A., 1998, Recent Res. Dev. Macromol. Res., 3, 455
- Favier, V. Ph.D. Thesis, Grenoble, France, 1995.
Cited by
Items 101–200 of 291
Brigode, C., Hobbi, P., Jafari, H., Verwilghen, F., Baeten, E., & Shavandi, A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122924 · Cited by 92
Hong, S., Yang, Y., Yang, Q., Chen, L., Deng, J., Chen, W., Lian, H., Mota-Morales, J. D., & Liimatainen, H. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.075 · Cited by 85
Cartwright, J. H. E., Checa, A. G., Escribano, B., & Sainz-Díaz, C. I. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0900867106 · Cited by 81
Wang, J., Wang, Z., Li, J., Wang, B., Liu, J., Chen, P., Miao, M., & Gu, Q. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.066 · Cited by 78
Liu, M., Qi, P., Luo, B., & Zhou, C. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.04.035 · Cited by 77
“prepared crab shell chitin whisker reinforced natural rubber (NR) [18–20], poly(caprolactone) (PCL) [23], poly(styrene-cobutyl acrylate) (poly(S-co-BuA)) [21] nanocomposites either by freeze-drying and hot-pressing or by casting and evaporating.”
BackgroundThe production, characterization and applications of nanoparticles in the textile industry
Mishra, R., Militký, J., Baheti, V., Huang, J., Kale, B. M., Venkataraman, M., Bele, V. R., Arumugam, V., Zhu, G., & Wang, Y. (2014) · Textile Progress · doi:10.1080/00405167.2014.964474 · Cited by 82
Adsorption of melanoidins by chitin nanofibers
Dolphen, R., & Thiravetyan, P. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.11.063 · Cited by 76
Younas, M., Noreen, A., Sharif, A., Majeed, A., Hassan, A., Tabasum, S., Mohammadi, A., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.064 · Cited by 74
Extraction of cellulose nanowhiskers from natural fibers and agricultural byproducts
Ludueña, L. N., Vecchio, A., Stefani, P. M., & Álvarez, V. A. (2013) · Fibers and Polymers · doi:10.1007/s12221-013-1118-z · Cited by 79
Qin, A., Li, X., Zhao, X., Liu, D., & He, C. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.01.035 · Cited by 70
Fabrication and characterization of melt-blended polylactide-chitin composites and their foams
Rizvi, R. R., Cochrane, B., Naguib, H. E., & Lee, P. C. (2011) · Journal of Cellular Plastics · doi:10.1177/0021955x11402549 · Cited by 77
Ludueña, L. N., Vázquez, A., & Álvarez, V. A. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38425 · Cited by 75
Feng, L., Zhou, Z., Dufresne, A., Huang, J., Wei, M., & An, L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29731 · Cited by 76
Self-citationJunkasem, J., Rujiravanit, R., Grady, B. P., & Supaphol, P. (2009) · Polymer International · doi:10.1002/pi.2693 · Cited by 66
Advances in chitin-based nanoparticle use in biodegradable polymers: A review
Yanat, M., & Schroën, K. G. P. H. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120789 · Cited by 67
Interfacial phenomena in nanocomposites based on polysaccharide nanocrystals
Dufresne, A. (2003) · Composite Interfaces · doi:10.1163/156855403771953641 · Cited by 65
Self-citationBandera, D., Sapkota, J., Josset, S., Weder, C., Tingaut, P., Gao, X., Foster, E. J., & Zimmermann, T. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.009 · Cited by 71
Gopi, S., Balakrishnan, P., Divya, C., Valić, S., Bajsić, E. G., Pius, A., & Thomas, S. (2017) · New Journal of Chemistry · doi:10.1039/c7nj02392h · Cited by 64
Preparation of aligned porous chitin nanowhisker foams by directional freeze–casting technique
Zhou, Y., Fu, S., Pu, Y., Pan, S., & Ragauskas, A. J. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.062 · Cited by 63
Preparation and properties of α‐chitin‐whisker‐reinforced hyaluronan–gelatin nanocomposite scaffolds
Hariraksapitak, P., & Supaphol, P. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32095 · Cited by 62
Highly crystalline chitosan produced by multi-steps acid hydrolysis in the solid-state
Osorio‐Madrazo, A., David, L., Trombotto, S., Lucas, J. ‐., Peniche-Covas, C., & Domard, A. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.035 · Cited by 60
Ma, H., Zou, Y., Zhang, S., Liu, L., Yu, J., & Fan, Y. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119544 · Cited by 59
Kumar, R., Kumari, S., Rai, B., Das, R. K., & Kumar, G. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab5755 · Cited by 58
Cellulose Nano Whiskers as a Reinforcing Filler in Polyurethanes
Li, Y., & Ragauskas, A. J. (2011) · InTech eBooks · doi:10.5772/14240 · Cited by 58
“In other words, cellulose monocrystallite has a high aspect ratio of 20-60 (Helbert et al., 1996; Eichhorn et al., 2001; Mathew & Dufresne, 2002; Morin & Dufresne, 2002; Samir et al., 2004).”
BackgroundOberemko, A., Salaberria, A. M., Saulė, R., Saulis, G., Kaya, M., Labidi, J., & Baublys, V. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.073 · Cited by 53
Wijesena, R. N., Tissera, N. D., Rathnayaka, V. W. S. G., Rajapakse, H. D., de Silva, R. M., & de Silva, K. M. N. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116132 · Cited by 53
Zhang, C., Zhuang, X., Li, X., Wang, W., Cheng, B., Kang, W., Cai, Z., & Li, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.029 · Cited by 51
“As we all know, CNW have een widely used in both synthetic polymeric matrixes and natual ones as a new kind of nanofillers to reinforce them (Lu et al., 004; Paillet & Dufresne, 2001).”
Rahimi, M., & Behrooz, R. (2011) · International Journal of Polymeric Materials · doi:10.1080/00914037.2010.531820 · Cited by 53
Cooperative performance of chitin whisker and rectorite fillers on chitosan films
Li, X., Li, X., Ke, B., Shi, X., & Du, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.03.040 · Cited by 50
Huang, J., Zou, J. W., Chang, P. R., Yu, J. H., & Dufresne, A. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.35 · Cited by 47
Self-citationElastomer Reinforced with Regenerated Chitin from Alkaline/Urea Aqueous System
Yu, P., He, H., Luo, Y., Jia, D., & Dufresne, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08294 · Cited by 47
Self-citationThermal properties of microcrystalline cellulose-filled PET–PTT blend polymer composites
Kızıltaş, A., Gardner, D. J., Han, Y., & Yang, H. (2010) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-010-0894-6 · Cited by 50
Dutta, A. K., Egusa, M., Kaminaka, H., Izawa, H., Morimoto, M., Saimoto, H., & Ifuku, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.08.094 · Cited by 45
Haque, M. M., Puglia, D., Fortunati, E., & Pracellà, M. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.11.003 · Cited by 45
Glycan-Functionalized Fluorescent Chitin Nanocrystals for Biorecognition Applications
Zhou, J., Butchosa, N., Jayawardena, H. S. N., Zhou, Q., Yan, M., & Ramström, O. (2014) · Bioconjugate Chemistry · doi:10.1021/bc500004c · Cited by 44
Lin, N., Zhao, S., Gan, L., Chang, P. R., Xia, T., & Huang, J. T. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.016 · Cited by 44
Hong, S., Yang, Y., Zhang, K., Lian, H., & Liimatainen, H. (2020) · Nanomaterials · doi:10.3390/nano10050869 · Cited by 42
Karimipour-Fard, P., Jeffrey, M. P., Jones-Taggart, H., Pop‐Iliev, R., & Rizvi, G. M. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104583 · Cited by 42
Sivanesan, I., Gopal, J., Muthu, M., Shin, J., & Oh, J. (2021) · Polymers · doi:10.3390/polym13142330 · Cited by 43
“Whiskers have recently been prepared from Ch from different sources, such as crab, shrimp, and lobster shells and squid pens [44,45].”
BackgroundComparative Sustainability Assessment of Starch Nanocrystals
Corre, D. L., Hohenthal, C., Dufresne, A., & Bras, J. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0447-0 · Cited by 43
Self-citationSingh, S., Patel, M. K., Schwendemann, D., Zaccone, M., Geng, S., Maspoch, M. L., & Oksman, K. (2020) · Polymers · doi:10.3390/polym12030726 · Cited by 42
Chen, Y., Xu, W., Liu, W., & Zeng, G. (2015) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2015.94 · Cited by 41
Processing of Bionanocomposites: Solution Casting
Mathew, A. P., & Oksman, K. (2014) · Materials and Energy/Materials and energy · doi:10.1142/9789814566469_0018 · Cited by 40
Photoswitchable nanocomposites made from coumarin-functionalized cellulose nanocrystals
Biyani, M. V., Weder, C., & Foster, E. J. (2014) · Polymer Chemistry · doi:10.1039/c4py00486h · Cited by 44
Nanobiopolymers Fabrication and Their Life Cycle Assessments
Yang, N., Zhang, W., Ye, C., Chen, X., & Ling, S. (2018) · Biotechnology Journal · doi:10.1002/biot.201700754 · Cited by 39
Bioactive and Biodegradable Polycaprolactone-Based Nanocomposite for Bone Repair Applications
Emadi, H., Karevan, M., Rad, M. M., Sadeghzade, S., Pahlevanzadeh, F., Khodaei, M., Khayatzadeh, S., & Lotfian, S. (2023) · Polymers · doi:10.3390/polym15173617 · Cited by 39
Biocatalyzed route for the preparation of surface-deacetylated chitin nanofibers
Ye, W., Ma, H., Liu, L., Yu, J., Lai, J., Fang, Y., & Fan, Y. (2019) · Green Chemistry · doi:10.1039/c9gc00857h · Cited by 38
Pal, N., Banerjee, S., Roy, P., & Pal, K. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4736 · Cited by 39
Abalymov, A. A., Pinchasik, B., Akasov, R., Lomova, M. V., & Parakhonskiy, B. V. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00503 · Cited by 37
Anwer, M. A. S., Wang, J., Guan, A., & Naguib, H. E. (2019) · RSC Advances · doi:10.1039/c9ra00769e · Cited by 36
Upcycling Byproducts from Insect (Fly Larvae and Mealworm) Farming into Chitin Nanofibers and Films
Pasquier, E., Beaumont, M., Mattos, B. D., Otoni, C. G., Winter, A., Rosenau, T., Belgacem, M. N., Rojas, O. J., & Bras, J. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05035 · Cited by 35
Maiti, P. (2003) · Langmuir · doi:10.1021/la0341308 · Cited by 35
High cellulose nanowhisker content composites through cellosize bonding
Hossain, K. M. Z., Jasmani, L., Ahmed, I., Parsons, A. J., Scotchford, C. A., Thielemans, W., & Rudd, C. D. (2012) · Soft Matter · doi:10.1039/c2sm26912k · Cited by 37
Advanced Nano-biocomposites Based on Starch
Xie, F., Pollet, É., Halley, P. J., & Avérous, L. (2014) · Springer eBooks · doi:10.1007/978-3-319-03751-6_50-1 · Cited by 40
El-Naggar, M. M., Abou‐Elmagd, W. S. I., Suloma, A., El-Shabaka, H. A., Khalil, T. M., & El-Rahman, F. A. A. A. (2019) · Journal of Shellfish Research · doi:10.2983/035.038.0220 · Cited by 33
Lin, N., Wei, S., Xia, T., Hu, F., Huang, J. T., & Dufresne, A. (2014) · RSC Advances · doi:10.1039/c4ra07899c · Cited by 32
Self-citationChitin and Chitosan Based Blends, Composites and Nanocomposites
Zuber, M., Zia, K. M., & Barikani, M. (2012) · Advanced structured materials · doi:10.1007/978-3-642-20940-6_3 · Cited by 39
Jadhav, H., Jadhav, A., Takkalkar, P., Hossain, N., Nizamuddin, S., Zahoor, M., Jamal, M., Mubarak, N. M., Griffin, G. J., & Kao, N. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-02287-y · Cited by 31
Hassanabadi, H. M., & Rodrigue, D. (2011) · Rheologica Acta · doi:10.1007/s00397-011-0603-9 · Cited by 34
“Gupta et al. (2005), using SEM and TEM with extensional rheometry, showed that reorganization of clay particles and creation of clay aggregates during uniaxial extension is a reason for the reduction of strain hardening in nanocomposites.”
BackgroundMethodInfluentialRubber Nanocomposites: Latest Trends and Concepts
Ponnamma, D., Maria, H. J., Chandra, A. K., & Thomas, S. (2013) · Advanced structured materials · doi:10.1007/978-3-642-20928-4_3 · Cited by 38
Biodegradable polymer nanocomposites
McLauchlin, A. R., & Thomas, N. L. (2012) · Elsevier eBooks · doi:10.1533/9780857096241.2.398 · Cited by 35
Ionic liquids facilitated dispersion of chitin nanowhiskers for reinforced epoxy composites
Wang, J., Chen, Z., Guan, A., Demarquette, N. R., & Naguib, H. E. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116746 · Cited by 30
Shamshina, J. L., & Abidi, N. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c02461 · Cited by 30
Changsarn, S., Mendez, J. D., Shanmuganathan, K., Foster, E. J., Weder, C., & Supaphol, P. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100183 · Cited by 32
Bioinspired design and chitin whisker reinforced chitosan membrane
Ma, B., Qin, A., Li, X., Zhao, X., & He, C. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.01.015 · Cited by 31
Tunable gas barrier properties of filled-PCL film by forming percolating cellulose network
Nadege, F., Belbekhouche, S., Bras, J., Siqueira, G. D. F., Chappey, C., Marais, S., & Dufresne, A. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.02.040 · Cited by 29
Self-citationBio‐based Nanomaterials and Their Bionanocomposites
Bagal-Kestwal, D., Kestwal, R. M., & Chiang, B. (2016) · Wiley eBooks · doi:10.1002/9783527683772.ch8 · Cited by 30
Nakagaito, A. N., Kanzawa, S., & Takagi, H. (2018) · Journal of Composites Science · doi:10.3390/jcs2020036 · Cited by 29
Phase Behavior of Liquid Crystalline Chitin/Acrylic Acid Liquid Mixture
Nge, T. T., Hori, N., Takemura, A., Ono, H., & Kimura, T. (2003) · Langmuir · doi:10.1021/la020764n · Cited by 27
Advances in the preparations and applications of nanochitins
Serventi, L., He, Q., Huang, J., Mani, A., & Subhash, A. J. (2021) · Food Hydrocolloids for Health · doi:10.1016/j.fhfh.2021.100036 · Cited by 25
Zhu, L., Liang, K., & Ji, Y. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.12.019 · Cited by 25
Effect of Chitin Whiskers on the Molecular Dynamics of Carrageenan-Based Nanocomposites
Carsí, M., Sanchis, M. J., Gómez, C. M., Rodríguez, S., & Torres, F. G. (2019) · Polymers · doi:10.3390/polym11061083 · Cited by 25
“The amide groups of CHW are positively charged due to the protonation by acid hydrolysis, allowing for electrostatic interaction between CHW and anionic polymers [30,32].”
BackgroundInvestigation of Carmine Dye Removal by Green Chitin Nanowhiskers Adsorbent
Meshkat, S. S., Nasirinezhad, M., & Bazmi, M. R. (2019) · Emerging Science Journal · doi:10.28991/esj-2019-01181 · Cited by 24
“2-2- Synthesis of Chitin Nano Whiskers Chitin Nano whiskers (CNW) from shrimp shells were synthesized with acid hydrolyze method that was reported by Morin and Dufresne [19].”
MethodInfluentialQin, S., Hu, Y., Tian, X., Tian, Y., Liu, W., & Zhao, L. (2020) · Cellulose · doi:10.1007/s10570-020-03069-x · Cited by 26
Polysaccharide-based natural and synthetic nanocomposites
Bogdanova, O. I., & Чвалун, С. Н. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16050047 · Cited by 23
Bogdanova, O. I., Polyakov, D. K., Streltsov, D. R., Bakirov, A. V., Blackwell, J., & Чвалун, С. Н. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.11.027 · Cited by 24
“64 The reinforcing effect of such whiskers depends very strongly on their aspect ratio (Nair 65 & Dufresne, 2003; Morin & Dufresne, 2002).”
BackgroundMultifunctional use of innovative chitin nanofibrils for skin care
Morganti, P., Müzzarelli, R. A. A., & Muzzarelll, C. (2006) · Journal of Applied Cosmetology · Cited by 22
Shibu, R. P., Jafari, M., Sagala, S. L., & Shamshina, J. L. (2025) · RSC Applied Polymers · doi:10.1039/d5lp00104h · Cited by 21
Nanochitin for sustainable and advanced manufacturing
Chee, P. L., Sathasivam, T., Tan, Y. C., Wu, W., Leow, Y., Lim, Q. R. T., Yew, P. Y. M., Zhu, Q., & Kai, D. (2024) · Nanoscale · doi:10.1039/d3nr05533g · Cited by 21
Morán, J., Ludueña, L. N., Phuong, V. T., Cinelli, P., Lazzeri, A., & Álvarez, V. A. (2016) · Polymers and Polymer Composites · doi:10.1177/096739111602400505 · Cited by 21
“In the last years these fibers also attracted much attention due to environmental concerns especially for the reinforcement of biodegradable polymers to produce fully biodegradable micro/nanocomposites with enhanced mechanical properties [12-19].”
BackgroundSu, R. Z., Wang, K., Ning, N., Chen, F., Zhang, Q., Wang, C., Fu, Q., & Na, B. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.001 · Cited by 23
Facchinatto, W. M., Santos, D. M. D., Bukzem, A. D. L., Moraes, T. B., Habitzreuter, F. B., de Azevêdo, E. R., Colnago, L. A., & Filho, S. P. C. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118563 · Cited by 20
N-Alkylated Chitin Nanocrystals as a Collector in Malachite Flotation
Hartmann, R., Beaumont, M., Pasquie, E., Rosenau, T., & Serna-Guerrero, R. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c01978 · Cited by 20
“…by acidic hydrolysis of the amorphous components and subsequent sonication treatment, the procedure affords individualized spindle-shaped ChNCs. 15,16 ChNC suspensions are colloidally stable under acidic to neutral conditions since in this range amino groups are protonated to electrostatically…”
Li, J., Wang, Y., Wang, Z., Wang, J., & Wu, D. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.10.253 · Cited by 20
Zeng, M., Gao, H., Wu, Y., Fan, L., & Li, A. (2010) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2010.492277 · Cited by 21
PROPERTIES OF CHITIN REINFORCES COMPOSITES: A REVIEW
Ofem, M. I., Anyandi, A., & Ene, E. B. (2016) · Nigerian Journal of Technology · doi:10.4314/njt.v36i1.9 · Cited by 19
Espadín, A., de Dios, L. T., Ruvalcaba-Paredes, E. K., Valadez-García, J., Velasquillo, C., Bustos‐Jaimes, I., Vázquez‐Torres, H., Gimeno, M., & Shirai, K. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.094 · Cited by 18
Cellulose‐Nanofiber‐Based Materials
Nakagaito, A. N., & Yano, H. (2014) · Wiley eBooks · doi:10.1002/9783527649440.ch1 · Cited by 20
Saad, G. R., Salama, H. E., Mohamed, N. A., & Sabaa, M. W. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40784 · Cited by 18
Maalihan, R. D., Pajarito, B. B., & Advíncula, R. C. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.05.063 · Cited by 18
Ji, Y., Wang, X., & Liang, K. (2014) · RSC Advances · doi:10.1039/c4ra08033e · Cited by 16
Reinforcement of poly (vinyl alcohol) films with alpha-chitin nanowhiskers
Lisboa, H. M. (2018) · Polímeros · doi:10.1590/0104-1428.07916 · Cited by 17
Chitin nanocrystal reinforced wet‐spun chitosan fibers
Yan, W., Shen, L., Ji, Y., Yang, Q., & Shen, X. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40852 · Cited by 16
Chitin-Based Nanocomposites: Biomedical Applications
João, C. F. C., Silva, J. A. M. D. C., & Borges, J. P. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2473-0_14 · Cited by 15
Nanoindentation characterization of the micro-lamellar arrangement of black coral skeleton
la Rosa, B. A. J.-D., Muñoz‐Saldaña, J., Torres, D. T., Ardisson, P., & Alvarado-Gil, J. J. (2011) · Journal of Structural Biology · doi:10.1016/j.jsb.2011.12.009 · Cited by 15
Shkuratov, A. S., Shibu, R. P., Therasme, O., Bertón, P., & Shamshina, J. L. (2024) · Sustainable Chemistry · doi:10.3390/suschem5020010 · Cited by 14
“The chitin nanowhiskers produced maintain high crystallinity and dimensional stability, making them suitable for various industrial applications including biomedicine, packaging, and electronics.”
BackgroundLarsson, M., Stading, M., & Larsson, A. (2010) · Soft Materials · doi:10.1080/1539445x.2010.495613 · Cited by 14
“It has been shown that the addition of a small amount of cellulose nanofibers can cause a significant increase of the Young’s modulus for the composite material as compared to the reference sample (26, 32, 39-42).”
BackgroundChandra, C. S. J., Bipinbal, P. K., Renju, V. S., Raman, V., K, B. S. T., Sasi, S., & Antony, J. V. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03069-4 · Cited by 12
“Different mechanical percolation threshold values were reported for cellulosic nanocomposites also: a percolation threshold of 1 wt% of chitin whiskers in poly (caprolactone) by Morin and Dufresne [35], and 1.”
BackgroundInfluentialFunabashi, M., & Kunioka, M. (2003) · Green Chemistry · doi:10.1039/b304759h · Cited by 12
Chitin nanomaterials: preparation and surface modifications
Mallik, A. K., Sakib, M. N., Shaharuzzaman, M., Haque, P., & Rahman, M. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817970-3.00006-7 · Cited by 11
Metadata
- Authors
- Morin, A., & Dufresne, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Dufresne, Alain
- ORCID
- Dufresne, Alain
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-02-07
- Volume
- 35
- Issue
- 6
- Pages
- 2190-2199
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1649065645
- Cited by
- 287
- References
- 36
- Citations by year
- 2026: 3 · 2025: 11 · 2024: 5 · 2023: 6 · 2022: 10 · 2021: 17 · 2020: 13 · 2019: 15 · 2018: 9 · 2017: 12 · 2016: 14 · 2015: 17 · 2014: 31 · 2013: 18 · 2012: 15
- FWCI
- 3.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- chitin whiskers, polycaprolactone, nanocomposites, acid hydrolysis, freeze-drying, hot pressing, mechanical properties, thermal stability, percolation, mechanical model
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.