The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Role of Block Copolymers on Suppression of Droplet Coalescence
Abstract
Block copolymer reduces particle size in immiscible polymer−polymer blends by suppressing droplet coalescence and by aiding droplet breakup through reduced interfacial tension. In this paper we separated coalescence from breakup and studied suppression of coalescence by block copolymers in a model blend composed of polystyrene (PS), high-density polyethylene (HDPE), and polystyrene−polyethylene (PS−PE) block copolymer. Coalescence was examined by monitoring particle size change vs shear strain while varying the shear rate, block copolymer concentration, molecular weight, and symmetry (coil size ratio of blocks). Even 0.5% PS−PE block copolymer significantly suppressed coalescence of HDPE droplets in a PS matrix. Assuming all of the PS−PE molecules were at the interface, the minimum concentration of block copolymers required to prevent coalescence under shear was found to be about 0.2 chain/nm 2 at a coalescence shear rate of 0.1 s -1 for PS−PE with a molecular weight of 20−20 kg/mol. We found that this minimum concentration decreased with shear rate and with increasing molecular weight of PS−PE. We also found that, with the total molecular weight being the same, a PS−PE with a larger PS block suppressed HDPE particle coalescence more efficiently than one with a smaller block. These results indicate that steric repulsive interactions due to the presence of block copolymer at the interfaces are more important than those due to interfacial tension gradients.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Compatibilizers for melt blending: premade block copolymers
Macosko, C. W., Guégan, P., Khandpur, A. K., Nakayama, A., Marechal, P., & Inoue, T. (1996) · Macromolecules · doi:10.1021/ma9602482 · Cited by 458
Self-citation
Cited by
Functional Block Copolymers: Nanostructured Materials with Emerging Applications
Schacher, F. H., Rupar, P. A., & Manners, I. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201200310 · Cited by 694
Walther, A., Matussek, K., & Müller, A. H. E. (2008) · ACS Nano · doi:10.1021/nn800108y · Cited by 310
Hong, J. S., Namkung, H., Ahn, K. H., Lee, S. J., & Kim, C. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.077 · Cited by 257
Macro, micro and nanostructured morphologies of multiphase polymer systems
Huang, H. (2011) · Handbook of Multiphase Polymer Systems · doi:10.1002/9781119972020.ch6 · Cited by 16
Horák, Z., Fortelný, I., Kolařík, J., Hlavatá, D., & Sikora, A. (2005) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst276 · Cited by 12
Metadata
- Authors
- Lyu, S., Jones, T. D., Bates, F. S., & Macosko, C. W.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-08-24
- Volume
- 35
- Issue
- 20
- Pages
- 7845-7855
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2047895818
- Cited by
- 205
- References
- 2
- FWCI
- 10.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.