The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Morphology and Thermal Stability of the Active Layer in Poly( p -phenylenevinylene)/Methanofullerene Plastic Photovoltaic Devices
Abstract
The morphology of composite thin films consisting of a conjugated polymer (poly[2-methoxy-5-(3‘,7‘-dimethyloctyloxy)-1,4-phenylenevinylene], MDMO-PPV) and methanofullerene ([6,6]-phenyl C 61 butyric acid methyl ester, PCBM), which are used as the active layer in polymer photovoltaic devices, has been extensively studied using transmission electron microscopy (TEM) and selected-area electron diffraction (SAED). Composite MDMO-PPV:PCBM films have been prepared with PCBM concentrations varying from 20 to 90 wt %. PCBM-rich clusters are clearly observed in TEM bright-field mode when the PCBM concentration is increased to ca. 75 wt % in the composite film. The SAED analysis shows that these clusters consist of many PCBM nanocrystals with random crystallographic orientations. Furthermore, we show that these nanocrystals are also present in the homogeneous matrix at PCBM concentrations below 75 wt %. Annealing of the blend films has been performed at temperatures between 60 and 130 °C for different times. In all cases, but especially when the annealing temperature is above the glass transition temperature of MDMO-PPV (∼80 °C), PCBM molecules show high diffusion mobility, resulting in accelerated phase segregation and in the formation of large PCBM single crystals in the film. The observed phase segregation, even at temperatures as low as 60 °C, indicates that the thermal stability of MDMO-PPV:PCBM films will likely limit the long-term performance of solar cells based on these materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene
Sariciftci, N. S., Smilowitz, L., Heeger, A. J., & Wudl, F. (1992) · Science · doi:10.1126/science.258.5087.1474 · Cited by 4,273
Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200102)11:1<15::aid-adfm15>3.0.co;2-a · Cited by 3,773
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Electronic Processes in Organic Crystals and Polymers
Pope, M., & Swenberg, C. E. (1999) · doi:10.1093/oso/9780195129632.001.0001 · Cited by 2,562
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films
Peumans, P., Uchida, S., & Forrest, S. R. (2003) · Nature · doi:10.1038/nature01949 · Cited by 1,302
Preparation and Characterization of Fulleroid and Methanofullerene Derivatives
Hummelen, J. C., Knight, B. W., LePeq, F., Wudl, F., Yao, J., & Wilkins, C. L. (1995) · The Journal of Organic Chemistry · doi:10.1021/jo00108a012 · Cited by 1,266
Efficient Methano[70]fullerene/MDMO‐PPV Bulk Heterojunction Photovoltaic Cells
Wienk, M. M., Kroon, J. M., Verhees, W. J. H., Knol, J., Hummelen, J. C., van Hal, P. A., & Janssen, R. A. J. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200351647 · Cited by 1,185
Self-citation
Cited by
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Charge Photogeneration in Organic Solar Cells
Clarke, T. M., & Durrant, J. R. (2010) · Chemical Reviews · doi:10.1021/cr900271s · Cited by 2,372
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Nanoscale Morphology of High-Performance Polymer Solar Cells
Yang, X., Loos, J., Veenstra, S. C., Verhees, W. J. H., Wienk, M. M., Kroon, J. M., Michels, M. A. J., & Janssen, R. A. J. (2005) · Nano Letters · doi:10.1021/nl048120i · Cited by 1,543
Self-citationMorphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
Stability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Erb, T., Zhokhavets, U., Gobsch, G., Raleva, S., Stühn, B., Schilinsky, P., Waldauf, C., & Brabec, C. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400521 · Cited by 831
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Organic—inorganic hybrid solar cells: A comparative review
Wright, M., & Uddin, A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.006 · Cited by 654
Toward High-Performance Polymer Solar Cells: The Importance of Morphology Control
Yang, X., & Loos, J. (2007) · Macromolecules · doi:10.1021/ma0618732 · Cited by 622
Self-citationDang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Interface investigation and engineering – achieving high performance polymer photovoltaic devices
Chen, L.-M., Xu, Z., Hong, Z., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/b925382c · Cited by 565
The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells
Oosterhout, S. D., Wienk, M. M., van Bavel, S. S., Thiedmann, R., Jan Anton Koster, L., Gilot, J., Loos, J., Schmidt, V., & Janssen, R. A. J. (2009) · Nature Materials · doi:10.1038/nmat2533 · Cited by 531
Self-citationProgress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics
Mateker, W. R., & McGehee, M. D. (2017) · Advanced Materials · doi:10.1002/adma.201603940 · Cited by 460
Nanoparticle–polymer photovoltaic cells
Saunders, B. R., & Turner, M. L. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2007.09.001 · Cited by 459
Conducting Polymer Nanomaterials and Their Applications
Jang, J. (2006) · Advances in Polymer Science · doi:10.1007/12_075 · Cited by 425
Li, G., Shrotriya, V., Yao, Y., Huang, J., & Yang, Y. (2007) · Journal of Materials Chemistry · doi:10.1039/b703075b · Cited by 377
Chen, C.-P., Chan, S.-H., Chao, T.-C., Ting, C., & Ko, B.-T. (2008) · Journal of the American Chemical Society · doi:10.1021/ja801877k · Cited by 353
Phase Diagram of P3HT/PCBM Blends and Its Implication for the Stability of Morphology
Zhao, J., Swinnen, A., Van Assche, G., Manca, J., Vanderzande, D., & Mele, B. V. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp804151a · Cited by 350
On the morphology of polymer‐based photovoltaics
Liu, F., Gu, Y., Jung, J. W., Jo, W. H., & Russell, T. P. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23063 · Cited by 323
Luminescent films for chemo- and biosensing
Guan, W., Zhou, W., Lu, J., & Lu, C. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00246j · Cited by 287
Li, J., Dierschke, F., Wu, J., Grimsdale, A. C., & Müllen, K. (2006) · J. Mater. Chem. · doi:10.1039/b512373a · Cited by 274
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Liu, F., Gu, Y., Shen, X., Ferdous, S., Wang, H.-W., & Russell, T. P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.010 · Cited by 268
Metadata
- Authors
- Yang, X., van Duren, J. K. J., Janssen, R. A. J., Michels, M. A. J., & Loos, J.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-02-21
- Volume
- 37
- Issue
- 6
- Pages
- 2151-2158
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2158713465
- Cited by
- 348
- References
- 29
- FWCI
- 22.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.