The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Morphology and Thermal Stability of the Active Layer in Poly( p -phenylenevinylene)/Methanofullerene Plastic Photovoltaic Devices
Abstract
The morphology of composite thin films consisting of a conjugated polymer (poly[2-methoxy-5-(3‘,7‘-dimethyloctyloxy)-1,4-phenylenevinylene], MDMO-PPV) and methanofullerene ([6,6]-phenyl C 61 butyric acid methyl ester, PCBM), which are used as the active layer in polymer photovoltaic devices, has been extensively studied using transmission electron microscopy (TEM) and selected-area electron diffraction (SAED). Composite MDMO-PPV:PCBM films have been prepared with PCBM concentrations varying from 20 to 90 wt %. PCBM-rich clusters are clearly observed in TEM bright-field mode when the PCBM concentration is increased to ca. 75 wt % in the composite film. The SAED analysis shows that these clusters consist of many PCBM nanocrystals with random crystallographic orientations. Furthermore, we show that these nanocrystals are also present in the homogeneous matrix at PCBM concentrations below 75 wt %. Annealing of the blend films has been performed at temperatures between 60 and 130 °C for different times. In all cases, but especially when the annealing temperature is above the glass transition temperature of MDMO-PPV (∼80 °C), PCBM molecules show high diffusion mobility, resulting in accelerated phase segregation and in the formation of large PCBM single crystals in the film. The observed phase segregation, even at temperatures as low as 60 °C, indicates that the thermal stability of MDMO-PPV:PCBM films will likely limit the long-term performance of solar cells based on these materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene
Sariciftci, N. S., Smilowitz, L., Heeger, A. J., & Wudl, F. (1992) · Science · doi:10.1126/science.258.5087.1474 · Cited by 4,273
Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200102)11:1<15::aid-adfm15>3.0.co;2-a · Cited by 3,773
Efficient photodiodes from interpenetrating polymer networks
Halls, J. J. M., Walsh, C. A., Greenham, N. C., Marseglia, E. A., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1995) · Nature · doi:10.1038/376498a0 · Cited by 3,258
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
Electronic Processes in Organic Crystals and Polymers
Pope, M., & Swenberg, C. E. (1999) · doi:10.1093/oso/9780195129632.001.0001 · Cited by 2,562
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films
Peumans, P., Uchida, S., & Forrest, S. R. (2003) · Nature · doi:10.1038/nature01949 · Cited by 1,302
Preparation and Characterization of Fulleroid and Methanofullerene Derivatives
Hummelen, J. C., Knight, B. W., LePeq, F., Wudl, F., Yao, J., & Wilkins, C. L. (1995) · The Journal of Organic Chemistry · doi:10.1021/jo00108a012 · Cited by 1,266
Efficient Methano[70]fullerene/MDMO‐PPV Bulk Heterojunction Photovoltaic Cells
Wienk, M. M., Kroon, J. M., Verhees, W. J. H., Knol, J., Hummelen, J. C., van Hal, P. A., & Janssen, R. A. J. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200351647 · Cited by 1,185
Self-citationMulti-colour organic light-emitting displays by solution processing
Müller, C. D., Falcou, A., Reckefuss, N., Rojahn, M., Wiederhirn, V., Rudati, P., Frohne, H., Nuyken, O., Becker, H., & Meerholz, K. (2003) · Nature · doi:10.1038/nature01390 · Cited by 1,110
Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors
Schilinsky, P., Waldauf, C., & Brabec, C. J. (2002) · Applied Physics Letters · doi:10.1063/1.1521244 · Cited by 1,032
Interface and chain confinement effects on the glass transition temperature of thin polymer films
Forrest, J. A., Dalnoki-Veress, K., & Dutcher, J. R. (1997) · Physical Review E · doi:10.1103/physreve.56.5705 · Cited by 804
Halls, J. J. M., Pichler, K., Friend, R. H., Moratti, S. C., & Holmes, A. B. (1996) · Applied Physics Letters · doi:10.1063/1.115797 · Cited by 800
Svensson, M., Zhang, F., Veenstra, S. C., Verhees, W. J. H., Hummelen, J. C., Kroon, J. M., Inganäs, O., & Andersson, M. R. (2003) · Advanced Materials · doi:10.1002/adma.200304150 · Cited by 736
Exciton diffusion and dissociation in conjugated polymer/fullerene blends and heterostructures
Haugeneder, A., Neges, M., Kallinger, C., Spirkl, W., Lemmer, U., Feldmann, J., Scherf, U., Harth, E., Gügel, A., & Müllen, K. (1999) · Physical Review B · doi:10.1103/physrevb.59.15346 · Cited by 404
Electron Trapping in Dye/Polymer Blend Photovoltaic Cells
Dittmer, J. J., Marseglia, E. A., & Friend, R. H. (2000) · Advanced Materials · doi:10.1002/1521-4095(200009)12:17<1270::aid-adma1270>3.0.co;2-8 · Cited by 394
Solvation-Induced Morphology Effects on the Performance of Polymer-Based Photovoltaic Devices
Liu, J., Shi, Y., & Yang, Y. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200112)11:6<420::aid-adfm420>3.0.co;2-k · Cited by 298
Soluble PPVs with Enhanced Performance—A Mechanistic Approach
Becker, H., Spreitzer, H., Kreuder, W., Kluge, E., Schenk, H. W., Parker, I. D., & Cao, Y. (2000) · Advanced Materials · Cited by 248
Supramolecular self-assembly and opto-electronic properties of semiconducting block copolymers
de Boer, B., Stalmach, U., van Hutten, P. F., Melzer, C., Krasnikov, V. V., & Hadziioannou, G. (2001) · Polymer · doi:10.1016/s0032-3861(01)00388-3 · Cited by 243
Martens, T., D’Haen, J., Munters, T., Beelen, Z., Goris, L., Manca, J., D’Olieslaeger, M., Vanderzande, D., De Schepper, L., & Andriessen, R. (2003) · Synthetic Metals · doi:10.1016/s0379-6779(02)01311-5 · Cited by 219
Accurate efficiency determination and stability studies of conjugated polymer/fullerene solar cells
Kroon, J. M., Wienk, M. M., Verhees, W. J. H., & Hummelen, J. C. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(01)01589-9 · Cited by 215
Neuteboom, E. E., Meskers, S. C. J., van Hal, P. A., van Duren, J. K. J., Meijer, E. W., Janssen, R. A. J., Dupin, H., Pourtois, G., Cornil, J., Lazzaroni, R., et al. (2003) · Journal of the American Chemical Society · doi:10.1021/ja034926t · Cited by 202
Self-citationCamaioni, N., Ridolfi, G., Casalbore-Miceli, G., Possamai, G., & Maggini, M. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021203)14:23<1735::aid-adma1735>3.0.co;2-o · Cited by 175
Characterization of polymer solar cells by TOF-SIMS depth profiling
Bulle‐Lieuwma, C. W. T., van Gennip, W. J. H., van Duren, J. K. J., Jonkheijm, P., Janssen, R. A. J., & Niemantsverdriet, J. W. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00756-0 · Cited by 153
Self-citationYoshino, K., Yin, X. H., Muro, K., Kiyomatsu, S., Morita, S., Zakhidov, A. A., Noguchi, T., & Ohnishi, T. (1993) · Japanese Journal of Applied Physics · doi:10.1143/jjap.32.l357 · Cited by 111
Photo-oxidation of electroluminescent polymers studied by core-level photoabsorption spectroscopy
Sutherland, D. G. J., Carlisle, J. A., Elliker, P. R., Fox, G. A., Hagler, T. W., Jiménez, I., Lee, H. W. H., Pakbaz, K., Terminello, L. J., Williams, S. C., et al. (1996) · Applied Physics Letters · doi:10.1063/1.116298 · Cited by 110
Size effect of metastable states on semicrystalline polymer structures and morphologies
Cheng, S. Z. D., Zhu, L. J., Li, C. Y., Honigfort, P. S., & Keller, A. (1999) · Thermochimica Acta · doi:10.1016/s0040-6031(99)00065-9 · Cited by 31
Solar cells from thermally treated polymer/dye blends with good spectral coverage
Cabanillas‐González, J., Yeates, S. G., & Bradley, D. D. C. (2003) · Synthetic Metals · doi:10.1016/s0379-6779(03)00326-6 · Cited by 25
Cited by
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Charge Photogeneration in Organic Solar Cells
Clarke, T. M., & Durrant, J. R. (2010) · Chemical Reviews · doi:10.1021/cr900271s · Cited by 2,372
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Nanoscale Morphology of High-Performance Polymer Solar Cells
Yang, X., Loos, J., Veenstra, S. C., Verhees, W. J. H., Wienk, M. M., Kroon, J. M., Michels, M. A. J., & Janssen, R. A. J. (2005) · Nano Letters · doi:10.1021/nl048120i · Cited by 1,543
Self-citation
Metadata
- Authors
- Yang, X., van Duren, J. K. J., Janssen, R. A. J., Michels, M. A. J., & Loos, J.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-02-21
- Volume
- 37
- Issue
- 6
- Pages
- 2151-2158
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2158713465
- Cited by
- 348
- References
- 29
- FWCI
- 22.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.