Bulk Ring-Opening Polymerization of Lactides Initiated by Ferric Alkoxides
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Ferric alkoxides (Fe(OR) 3 ), where R = Et, n Pr, i Pr, and n Bu, were used as initiators for bulk ring-opening polymerization of lactides. It was showed that these ferric alkoxides were efficient initiators for the ring-opening polymerization of lactides with higher than 90% of monomer conversions polymerized at 130 °C for 36 h. Maximum molecular weights were achieved at 1/1000 of [I]/[M] mole ratio and then decreased gradually with increasing amount of initiator and prolonging polymerization time. Poly( dl -lactide) and poly( l -lactide) with the maximum viscosity-average molecular weights ( M v ) of 7.28 × 10 4 and 19.00 × 10 4, respectively, were synthesized by using ferric ethoxide as initiator. The molecular weight decreased and the molecular weight distribution broadened as the polymerization temperature increased. With increasing the bulkiness of the ligands of the ferric alkoxides, the molecular weight decreased and the molecular weight distribution broadened. 1 H and 13 C NMR analyses indicated that no racemization occurred during the ring-opening polymerization of l -lactide, while isotactic stereoselectivity addition was found in the ring-opening polymerization of dl -lactide. Intermolecular transesterification took place during polymerization of dl -lactide as evidenced by the results of MALDI−TOF MS analysis, and the quantitative evaluation for each initiation system was made by 13 C NMR analysis. ICP-AES, 1 H NMR, and MALDI-TOF MS analyses indicated that the polymerization of lactides proceeded via a coordination−insertion mechanism involving cleavage of the acyl−oxygen bond of the lactides. All alkoxy groups in Fe(OR) 3 were converted into polylactide growing chains.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Syntheses and application of polylactides
Kricheldorf, H. R. (2001) · Chemosphere · doi:10.1016/s0045-6535(00)00323-4 · Cited by 343
Coordination polymerization of lactides, 1. Structure determination of obtained polymers
Bero, M., Kasperczyk, J., & Jedlinski, Z. J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021911007 · Cited by 190
Use of Monocarboxylic Iron Derivatives in the Ring-Opening Polymerization of l-Lactide
Stolt, M., & Södergård, A. (1999) · Macromolecules · doi:10.1021/ma9902753 · Cited by 119
Cited by
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Biocompatible Initiators for Lactide Polymerization
Platel, R., Hodgson, L., & Williams, C. (2008) · Polymer Reviews · doi:10.1080/15583720701834166 · Cited by 706
Discrete Cationic Complexes for Ring-Opening Polymerization Catalysis of Cyclic Esters and Epoxides
Sarazin, Y., & Carpentier, J.-F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00033 · Cited by 299
Ma, H., Spaniol, T. P., & Okuda, J. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200603178 · Cited by 275
Chen, H.-Y., Tang, H.-Y., & Lin, C.-C. (2006) · Macromolecules · doi:10.1021/ma060471r · Cited by 270
Metadata
- Authors
- Wang, X., Liao, K., Quan, D., & Wu, Q.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-05-01
- Volume
- 38
- Issue
- 11
- Pages
- 4611-4617
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2050815719
- Cited by
- 127
- References
- 6
- FWCI
- 4.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.