CoChat

Crystallization in Poly(l-lactide)-b-poly(ε-caprolactone) Double Crystalline Diblock Copolymers: A Study Using X-ray Scattering, Differential Scanning Calorimetry, and Polarized Optical Microscopy

Hamley, I. W., Castelletto, V., Castillo, R. V., Müller, A. J., Martin, C. M., Pollet, E., Dubois, Ph. · 2005 · Macromolecules

The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.

Abstract

The crystallization of well-defined poly( l -lactide)- b -poly(ε-caprolactone) diblock copolymers, PLLA- b -PCL, was investigated by time-resolved X-ray techniques, polarized optical microscopy (POM), and differential scanning calorimetry (DSC). Two compositions were studied that contained 44 and 60 wt % poly( l -lactide), PLLA (they are referred to as L 44 11 C 56 14 and L 60 12 C 40 9, respectively, with the molecular weight of each block in kg/mol as superscript). The copolymers were found to be initially miscible in the melt according to small-angle X-ray scattering measurements (SAXS). Their thermal behavior was also indicative of samples whose crystallization proceeds from a mixed melt. Sequential isothermal crystallization from the melt at 100 °C (for 30 min) and then at 30 °C (for 15 min) was measured. At 100 °C only the PLLA block is capable of crystallization, and its crystallization kinetics was followed by both WAXS and DSC; comparable results were obtained that indicated an instantaneous nucleation with three-dimensional superstructures (Avrami index of approximately 3). The spherulitic nature of the superstructure was confirmed by POM. When the temperature was decreased to 30 °C, the PCL block was able to crystallize within the PLLA negative spherulites (with an Avrami index of 2, as opposed to 3 in homo-PCL), and its crystallization rate was much slower than an equivalent homo-PCL. Time-resolved SAXS experiments in L 60 12 C 40 9 revealed an initial melt mixed morphology at 165 °C that upon cooling transformed into a transient microphase-separated lamellar structure prior to crystallization at 100 °C.

Overview

Integrity signals

Registry

Crossref · 10.1021/ma0481499

Cites

19 of 19 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

12 more claims about this paper

Create a free account to see every claim other papers make about this one.

See all claims — free account

Citations

Cites

Research works printed but not linked: 5

  1. Bezwada, R. S.; Jamiolkowski, D.; Cooper, K. InHandbook of BiodegradablePolymers; Domb, A. J., Kost, J., Wiseman, D. M., Eds.; Harwood: Singapore, 1997; Chapter 2, pp 29−61.
  2. Müller A. J., 2004, Macromol. Symp.
  3. Tang C. C., 2003, Sect. B, in press. Helsby, W. I.
  4. Gedde U. W., 1995, Polymer Physics
  5. Hamley I. W., 2004, Prog. Polym. Sci., 29, 909

Cited by

See all 160

Metadata

Authors
Hamley, I. W., Castelletto, V., Castillo, R. V., Müller, A. J., Martin, C. M., Pollet, E., & Dubois, P.
Affiliations
  • University of Leeds (GB)
  • Daresbury Laboratory (GB)
Venue
Macromolecules
Published
2004-12-15
Volume
38
Issue
2
Pages
463-472
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W1997304772
Cited by
160
References
18
Citations by year
2026: 3 · 2025: 5 · 2024: 2 · 2023: 5 · 2022: 1 · 2021: 7 · 2020: 6 · 2019: 5 · 2018: 6 · 2017: 11 · 2016: 6 · 2015: 10 · 2014: 17 · 2013: 6 · 2012: 9
FWCI
7.60
Type
journal article
Language
en
Open access
closed
Locations
  • Macromolecules (publishedVersion)
  • ORBi UMONS (submittedVersion)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
diblock copolymers, crystallization kinetics, nucleation, Avrami exponent, spherulites, superstructure, microphase separation, lamellar morphology, melt miscibility, block copolymer morphology, time-resolved X-ray scattering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.