The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Modification of Poly(lactic acid) Films: Enhanced Wettability from Surface-Confined Photografting and Increased Degradation Rate Due to an Artifact of the Photografting Process
Abstract
The major objective of this research was to modify PLA film surfaces with the ultimate aim of making a bioactive surface that will show faster degradation. The PLA film was solvent-cast, and the film surfaces were grafted with poly(acrylic acid) (PAA) and poly(acrylamide) (PAAm) using a UV-induced photopolymerization process. The film surface resulting from each reaction step was analyzed using ATR−FTIR spectroscopy and contact angle measurements. Results showed that PAA was grafted from PLA film surfaces in 2 or 3 h, while PAAm was grafted in 3 or 5 h depending on the method of activation. Films grafted with PAA and PAAm exhibited improved wettability. The neat and surface-modified films were incubated in different pH solutions, viz., pH = 4, 7, and 10, for specified time periods. The films resulting from each treatment were analyzed using atomic force microscopy (AFM). The molecular weights of the incubated films were measured using chloroform-based GPC. Results established that faster degradation of the PLA film when incubated in different pH solutions was achieved for PLA- g -PAA films; however, control studies revealed that the major contribution to the observed degradation was due to the entangled PAA chains resulting from acrylic acid monomer that migrated into the film bulk and not due to the surface-grafted layers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Mechanisms of polymer degradation and erosion
Göpferich, A. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85755-3 · Cited by 1,781
Biodegradation of PLA/GA polymers: increasing complexity
Vert, M., Mauduit, J., & Li, S. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90271-2 · Cited by 425
Polylactide Degradation by an Amycolatopsis sp
Pranamuda, H., Tokiwa, Y., & Tanaka, H. (1997) · Applied and Environmental Microbiology · doi:10.1128/aem.63.4.1637-1640.1997 · Cited by 287
Characterization of the degradation of polylactic acid polymer in a solid substrate environment
Agarwal, M., Koelling, K. W., & Chalmers, J. J. (1998) · Biotechnology Progress · doi:10.1021/bp980015p · Cited by 212
Kimura, Y., Shirotani, K., Yamane, H., & Kitao, T. (1988) · Macromolecules · doi:10.1021/ma00189a037 · Cited by 165
Poly(lactic acid) degradation in soil or under controlled conditions
Torres, A., Li, S., Roussos, S., & Vert, M. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961226)62:13<2247::aid-app9>3.0.co;2-j · Cited by 123
Attenuated total reflectance spectroscopy of polymers : theory and practice
Urban, M. W. (1996) · American Chemical Society eBooks · Cited by 114
Does UV irradiation affect polymer properties relevant to tissue engineering?
Fischbach, C., Teßmar, J., Lucke, A., Schnell, E., Schmeer, G., Blunk, T., & Göpferich, A. M. (2001) · Surface Science · doi:10.1016/s0039-6028(01)01297-3 · Cited by 102
Biodegradation of porous versus non-porous poly(L-lactic acid) films
Lam, K. H., Nieuwenhuis, P., Molenaar, I., Esselbrugge, H., Feijén, J., Dijkstra, P. J., & Schakenraad, J. M. (1994) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00121086 · Cited by 94
Complexity of the hydrolytic degradation of aliphatic polyesters
Vert, M., Li, S., Garreau, H., Mauduit, J., Boustta, M., Schwach, G., Engel, R., & Coudane, J. (1997) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1997.052470116 · Cited by 81
Research works printed but not linked: 16
- Ouchi T., 2002, J. Polym. Sci., Polym. Chem., 40, 1225
- Irvine D. J., 2001, Biomacromolecules, 2, 556
- Cai K., 2002, J. Biomed. Mater. Res., 60, 404
- Ma H., 2000, Macromolecules, 33, 335
- Yang W., 1999, Eur. Polym. J., 35, 1568
- Noh I., 1997, J. Polym. Sci., Polym. Chem., 35, 3482
- Steffens G. C. M., 2002, Biomaterials, 23, 3531
- Zhang X., 1994, J. Bioact. Compat. Polym., 9, 100
- Ho K. G., 1999, J. Environ. Polym. Degrad., 7, 100
- McDonald R. T., 1996, Macromolecules, 29, 7361
- Torres A., 1996, J. Appl. Polym. Sci., 62, 2302, 10.1002/(sici)1097-4628(19961226)62:13<2295::aid-app14>3.0.co;2-2 · DOI
- Heller J., 1987, J. Controlled Release, 5, 177
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 136
- Hsu W. P., 1993, Polymer, 34, 603
- Barndup J., 1988, Polymer Handbook
- Chen K. M., 2000, Langmuir, 16, 7834
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Self-citationHydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Ifkovits, J. L., & Burdick, J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0093 · Cited by 619
“with PAA and poly(acrylamide) using photopolymerization in an attempt to generate a bioactive surface with rapid degradation.(99) Various copolymers containing blocks of poly(a-hydroxy esters) and other synthetic polymers have been prepared.”
Developments and new applications of UV-induced surface graft polymerizations
DENG, J., WANG, L., LIU, L., & YANG, W. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.06.002 · Cited by 465
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
“Several factors affect the degradation rate of PLA: crystallinity, molecular weight, morphology, molecular weight distribution, stereoisomeric content, and water diffusion rate into the polymer [87,88].”
BackgroundPinto, A. M., Cabral, J., Tanaka, D. A. P., Mendes, A. M., & Magalhães, F. D. (2013) · Polymer International · doi:10.1002/pi.4290 · Cited by 326
An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
Vanaei, S., Parizi, M. S., Vanaei, S., Salemizadehparizi, F., & Vanaei, H. R. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2020.12.001 · Cited by 308
Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
Baran, E. H., & Erbil, H. Y. (2019) · Colloids and Interfaces · doi:10.3390/colloids3020043 · Cited by 248
“As a result, it has been observed that the hydrophilicity or wettability of the grafted surfaces has improved considerably [86].”
BackgroundState of the art and future prospectives of poly(lactic acid) based blends and composites
Sangeetha, V. H., Deka, H., Varghese, T. O., & Nayak, S. K. (2018) · Polymer Composites · doi:10.1002/pc.23906 · Cited by 216
Hydrolysis and Biodegradation of Poly(lactic acid)
Gorrasi, G., & Pantani, R. (2017) · Advances in Polymer Science · doi:10.1007/12_2016_12 · Cited by 181
“• generation of hydrophilic surfaces by copolymerization, grafting reactions, and cross-linking [84-90]”
BackgroundBiobased Polymer Composites: A Review
Pokharel, A., Falua, K. J., Babaei-Ghazvini, A., & Acharya, B. (2022) · Journal of Composites Science · doi:10.3390/jcs6090255 · Cited by 163
Palai, B., Biswal, M., Mohanty, S., & Nayak, S. K. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111748 · Cited by 163
Surface functionalization of biomaterials by radical polymerization
Zhou, T., Zhu, Y., Li, X., Liu, X., Yeung, K. W. K., Wu, S., Wang, X., Cui, Z., Yang, X., & Chu, P. K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.04.005 · Cited by 145
“In addition to the aforementioned polymer substrates, there are other polymer substrates such as poly(lactic acid) (PLA) [369], poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) [371], polyethersulfone (PES) [387], poly(vinylidene fluoride) (PVDF) [388], PU [393], polycarbonateurethane (PCU) [394], and inorganic…”
BackgroundSynthesis and characterization of poly(lactic acid) based graft copolymers
Maharana, T., Pattanaik, S., Routaray, A., Nath, N., & Sutar, A. K. (2015) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2015.05.006 · Cited by 134
Toughness decrease of PLA‐PHBHHx blend films upon surface‐confined photopolymerization
Rasal, R. M., & Hirt, D. E. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32009 · Cited by 120
Self-citationJanorkar, A. V., Metters, A. T., & Hirt, D. E. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.24692 · Cited by 113
Self-citationMysiukiewicz, O., Barczewski, M., Skórczewska, K., & Matykiewicz, D. (2020) · Polymers · doi:10.3390/polym12061333 · Cited by 107
“, molecular weight, polydispersity, stereoisomeric content, and crystallinity degree [13,19,20].”
BackgroundPoly(lactic acid) based hydrogels: formation, characteristics and biomedical applications
Munim, S. A., & Raza, Z. A. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0687-z · Cited by 108
Nonato, R. C., Mei, L. H. I., Bonse, B. C., Chinaglia, E. F., & Morales, A. R. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.026 · Cited by 97
Kurniawan, D., Kim, B.-S., Lee, H. Y., & Lim, J. Y. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.11.007 · Cited by 97
Barkhad, M. S., Abu‐Jdayil, B., Mourad, A. I., & Iqbal, M. Z. (2020) · Polymers · doi:10.3390/polym12092091 · Cited by 93
Beyond Biodegradability of Poly(lactic acid): Physical and Chemical Stability in Humid Environments
Rocca-Smith, J. R., Whyte, O., Brachais, C., Champion, D., Piasente, F., Marcuzzo, E., Sensidoni, A., Debeaufort, F., & Karbowiak, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03088 · Cited by 96
Surface Modification Changes the Degradation Process and Degradation Product Pattern of Polylactide
Höglund, A., Hakkarainen, M., Edlund, U., & Albertsson, A. (2009) · Langmuir · doi:10.1021/la902166j · Cited by 88
pH-Responsive Nanostructures Assembled from Amphiphilic Block Copolymers
Chen, X., Wayland, B. B., Fryd, M. M., Winey, K. I., & Composto, R. J. (2006) · Macromolecules · doi:10.1021/ma060881f · Cited by 85
Mizuno, S., Maeda, T., Kanemura, C., & Hotta, A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.03.015 · Cited by 80
Application of FTIR Spectroscopy in Environmental Studies
María, C. (2012) · InTech eBooks · doi:10.5772/48331 · Cited by 77
“All these advantages make that ATR-FTIR spectroscopy to be used for: analysis of processes at surfaces (Freger and Ben-David, 2005), surface modification (Lehocký et al. 2003; Janorkar et al., 2004), surface degradation (Bokria et al.”
Covalent Grafting of Poly( l -lactide) to Tune the In Vitro Degradation Rate
Källrot, M., Edlund, U., & Albertsson, A. (2007) · Biomacromolecules · doi:10.1021/bm700442j · Cited by 74
Gao, P., & Masato, D. (2024) · Micromachines · doi:10.3390/mi15060776 · Cited by 78
“PLA’s lack of such groups will make the material more resistant to degradation, which is not ideal for environmental sustainability [33–35].”
BackgroundSanto, V. E., Duarte, A. R. C., Gomes, M. E., Mano, J. F., & Reis, R. L. (2010) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2010.05.021 · Cited by 78
“The addition of hydrophilic polymers has been suggested in previous works [56,57], in order to increase”
BackgroundXu, H., Yang, X., Xie, L., & Hakkarainen, M. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01636 · Cited by 72
Pellis, A., Acero, E. H., Weber, H., Obersriebnig, M., Breinbauer, R., Srebotnik, E., & Guebitz, G. M. (2015) · Biotechnology Journal · doi:10.1002/biot.201500074 · Cited by 70
“In this way the measured angle was constant and reproducible though all the samples and remarkable differences before and after the enzymatic treatment were evidenced [28, 35].”
Electroactive Hydrophilic Polylactide Surface by Covalent Modification with Tetraaniline
Guo, B., Finne‐Wistrand, A., & Albertsson, A. (2011) · Macromolecules · doi:10.1021/ma202508h · Cited by 67
Functionalized Polylactide Film Surfaces via Surface-Initiated ATRP
Xu, F., Yang, X. C., Li, C. Y., & Yang, W. (2011) · Macromolecules · doi:10.1021/ma200160h · Cited by 66
Park, C., Seong, Y., Kang, I., Song, E., Lee, H., Kim, J. Y., Jung, H., Kim, H., & Jang, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21363 · Cited by 66
Thermal degradation kinetics of sucrose palmitate reinforced poly(lactic acid) biocomposites
Valapa, R., Pugazhenthi, G., & Katiyar, V. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.01.053 · Cited by 64
Ayyoob, M., & Kim, Y. J. (2018) · Polymers · doi:10.3390/polym10101132 · Cited by 62
Chen, C.-Q., Ke, D.-M., Zheng, T., He, G., Cao, X., & Liao, X. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04094 · Cited by 60
Zhong, X., Lu, Z., Valtchev, P., Wei, H., Zreiqat, H., & Dehghani, F. (2011) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2011.12.016 · Cited by 56
Bioplastics for Food Packaging
Byun, Y., & Kim, Y. T. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-394601-0.00014-x · Cited by 54
Jianxin, L., Liu, Z., Xiao-lei, Z., Habudula, G., & Xuedi, C. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.03.409 · Cited by 49
Stankevich, K. S., Gudima, A., Filimonov, V. D., Klüter, H., Mamontova, E. M., Tverdokhlebov, S. I., & Kzhyshkowska, J. G. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.02.047 · Cited by 48
Hydrolytic degradation behavior of poly(l-lactide)/carbon nanotubes nanocomposites
Chen, H., Feng, C., Zhang, W., Yang, J., Huang, T. K., Zhang, N., & Wang, Y. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.10.009 · Cited by 48
Fan, X., Cao, M., Zhang, X., & Li, Z. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.108 · Cited by 47
Zhi, L., Li, S., He, X., Feng, Y., Cheng, C., Li, S., Sun, S., & Zhao, C. (2022) · Journal of Membrane Science · doi:10.1016/j.memsci.2022.121162 · Cited by 48
Darabian, B., Bagheri, H., & Mohammadi, S. (2020) · Progress in Biomaterials · doi:10.1007/s40204-020-00131-6 · Cited by 48
“The increased hydrophilicity of this polymer results in enhanced bioactivity, biodegradability, and its interaction with body tissues (Janorkar et al. 2004).”
BackgroundBalart, J., Fombuena, V., España, J. M., Sánchez‐Nacher, L., & Balart, R. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.06.069 · Cited by 45
Surface-Immobilized Photoinitiators for Light Induced Polymerization and Coupling Reactions
Müller, M. W., Bandl, C., & Kern, W. (2022) · Polymers · doi:10.3390/polym14030608 · Cited by 44
Stoleru, E., Zaharescu, T., Hitruc, E. G., Vesel, A., Ioanid, E. G., Coroabǎ, A., Sáfrány, Á., Pricope, G. M., Lungu, M., Schick, C. H., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09069 · Cited by 43
Use of Polyesters in Fused Deposition Modeling for Biomedical Applications
Grivet‐Brancot, A., Boffito, M., & Ciardelli, G. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200039 · Cited by 46
Tian, F., Decker, E. A., & Goddard, J. M. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf302377b · Cited by 49
Micropatterning of Covalently Attached Biotin on Poly(lactic acid) Film Surfaces
Rasal, R. M., & Hirt, D. E. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200800374 · Cited by 43
Self-citationXie, L., Xu, H., Wang, Z.-P., Li, X., Chen, J.-B., Zhang, Z., Yin, H., Zhong, G., Lei, J., & Li, Z. (2014) · Journal of Polymer Research · doi:10.1007/s10965-014-0357-z · Cited by 42
Pal, A. K., & Katiyar, V. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.11.024 · Cited by 40
Chakraborty, R., Anoop, A. G., Thakur, A., Mohanta, G. C., & Kumar, P. (2023) · ACS Omega · doi:10.1021/acsomega.2c05984 · Cited by 40
Bai, H., Huang, Z., & Yang, W. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23724 · Cited by 40
Janorkar, A. V., Fritz, E. W., Burg, K. J. L., Metters, A. T., & Hirt, D. E. (2006) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30647 · Cited by 38
Self-citationHydrolytic degradation behavior of poly(l-lactide)/SiO2 composites
Chen, H., Wang, Y.-P., Chen, J., Yang, J., Zhang, N., Huang, T. K., & Wang, Y. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.033 · Cited by 38
Surface Grafting Polyethylene Glycol (PEG) onto Poly(ethylene-co-acrylic acid) Films
Zhang, C., Luo, N., & Hirt, D. E. (2006) · Langmuir · doi:10.1021/la0532712 · Cited by 38
Self-citationPoly(lactic acid) Toughening with a Better Balance of Properties
Rasal, R. M., & Hirt, D. E. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900195 · Cited by 37
Self-citationValapa, R. B., Pugazhenthi, G., & Katiyar, V. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41320 · Cited by 37
Janorkar, A. V., Proulx, S. E., Metters, A. T., & Hirt, D. E. (2006) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21700 · Cited by 35
Self-citationSurface functionalization of poly(lactic acid) film by UV‐photografting of N‐vinylpyrrolidone
Gutiérrez-Villarreal, M. H., Ulloa‐Hinojosa, M. G., & Lozano, J. G. G. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28000 · Cited by 35
Zhao, W., Wang, Y., Liu, X., Chen, X., & Cui, D. (2012) · Chemistry - An Asian Journal · doi:10.1002/asia.201200352 · Cited by 35
Biodegradation of modified starch/poly lactic acid nanocomposite in soil
Zamir, S. S., Fathi, B., Ajji, A., Robert, M., & Elkoun, S. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.109902 · Cited by 34
Effect of plasma treatment on accelerated PLA degradation
Antunes, A. P. M., Luyt, A. S., Kasák, P., Aljarod, O., Hassan, M. K., & Popelka, A. (2021) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2021.60 · Cited by 33
“Improved hydrophilicity of the plasma-treated PLA with an enhanced water content contributed to the accelerated hydrolytic degradation of the PLA samples [30].”
Zhang, Y., Liu, C., Wu, M., Li, Z., & Li, B. (2021) · Nanomaterials · doi:10.3390/nano12010001 · Cited by 33
Heredia‐Guerrero, J. A., Caputo, G., Guzmán‐Puyol, S., Tedeschi, G., Heredia, A., Ceseracciu, L., Benitez, J. J., & Athanassiou, A. (2018) · Materials Today Sustainability · doi:10.1016/j.mtsust.2018.12.001 · Cited by 33
Mann, G. S., Singh, L. P., Kumar, P., Singh, S., & Prakash, C. (2019) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719856052 · Cited by 32
Lao, H., Renard, E., Langlois, V., Vallée‐Rehel, K., & Linossier, I. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31507 · Cited by 32
Superiorly Plasticized PVC/PBSA Blends through Crotonic and Acrylic Acid Functionalization of PVC
Avalos, A. S., Hakkarainen, M., & Odelius, K. (2017) · Polymers · doi:10.3390/polym9030084 · Cited by 31
Xie, Z., Buschle‐Diller, G., DeInnocentes, P., & Bird, R. C. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34239 · Cited by 30
Rohman, G., Baker, S. C., Southgate, J., & Cameron, N. R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911625g · Cited by 30
Rasal, R. M., Bohannon, B. G., & Hirt, D. E. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30980 · Cited by 29
Self-citationMajidi, H. J., Babaei, A., Kazemi‐Pasarvi, S., Arab‐Bafrani, Z., & Amiri, M. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.5202 · Cited by 28
Investigation of the Thermal and Hydrolytic Degradation of Polylactide during Autoclave Foaming
Dreier, J., Brütting, C., Ruckdäschel, H., Altstädt, V., & Bonten, C. (2021) · Polymers · doi:10.3390/polym13162624 · Cited by 28
Gong, Z., Huang, J., Fan, J., Chen, X., Wang, H., & Chen, Y. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03392 · Cited by 28
Haroon, Ullah, S., & Flint, J. A. (2014) · International Conference on Emerging Technologies · doi:10.1109/icet.2014.7021036 · Cited by 31
“[23] Janorkar AV, Metters AT, Hirt DE, “Modification of poly(lactic acid) films: enhanced wettability from surface-confined photografting and increased degradation rate due to an artifact of the photografting process”, Macromolecules;37: pp.”
BackgroundPoly (l-lactic acid) membrane crosslinked with Genipin for guided bone regeneration
Cheon, S. Y., Kim, J., Lee, K., & Lee, C. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.137 · Cited by 27
The nature of polymer grafts and substrate shape on the surface degradation of poly( l ‐lactide)
Nugroho, R. W. N., Odelius, K., Höglund, A., & Albertsson, A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42736 · Cited by 27
Understanding and tailoring the degradation of PVA‐tyramine hydrogels
Lim, K. S., Roberts, J. J., Alves, M.-H., Poole-Warren, L. A., & Martens, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42142 · Cited by 26
Casarano, R., Bentini, R., Bueno, V. B., Iacovella, T., Filippin-Monteiro, F. B., Iha, F. A. S., Čampa, A., Petri, D. F. S., Jaffé, M., & Catalani, L. H. (2009) · Polymer · doi:10.1016/j.polymer.2009.10.048 · Cited by 26
Kurniawan, D., Kim, B.-S., Lee, H. Y., & Lim, J. Y. (2015) · Composite Interfaces · doi:10.1080/09276440.2015.1054743 · Cited by 25
“There was shift in C=O peak which represents the grafted acrylic acid.[21]”
BackgroundAlshammari, A., Alabdah, F., Wang, W., & Cooper, G. (2023) · Polymers · doi:10.3390/polym15193918 · Cited by 24
“However, in this study Young’s modulus and the Poisson ratio for the three scaffold cases were 1000 MPa and 0.3, respectively, which are within the range of polymer − ceramics composites used in bone regeneration applications [61,79], which commonly use polycaprolactone (PCL), poly(l-lactide) (LPLA) or poly(lactic aci…”
ResultInfluentialNondestructive Covalent “Grafting-from” of Poly(lactide) Particles of Different Geometries
Nugroho, R. W. N., Odelius, K., Höglund, A., & Albertsson, A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3003507 · Cited by 24
Ajiro, H., Takahashi, Y., Akashi, M., & Fujiwara, T. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.011 · Cited by 25
Zhang, S., Li, H., Yuan, M., Yuan, M., & Chen, H. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18102041 · Cited by 24
“Although it is an ideal biomaterial with biocompatibility and biodegradability, PLA is a very brittle material with less than 10% elongation at break [24,25], which largely limits its practical use in the medical field.”
BackgroundPolymeric Materials for 3D Bioprinting
Mukherjee, P., Rani, A., & Saravanan, P. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815890-6.00004-9 · Cited by 29
Balart, J., Fombuena, V., Boronat, T., Reig, M. J., & Balart, R. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6056-9 · Cited by 23
“(PAAm) [21], polyacrylic acid (PAA) [21], vinyl acetate (VAc) [22-24], etc.”
Study of biodegradable occluder of atrial septal defect in a porcine model
Li, B., Xie, Y., Xie, Z., Chen, X., Zhang, G., Zhang, D., Liu, X., & Zhang, Z. (2018) · Catheterization and Cardiovascular Interventions · doi:10.1002/ccd.27852 · Cited by 23
“PLLA degrades through the hydrolysis of backbone ester groups and the degradation rate depends on the PLLA crystallinity, molecular weight, molecular weight distribution, morphology, water diffusion rate into the polymer, and the stereoisomeric content.(31) The degradation rate is often considered to be an important s…”
BackgroundStloukal, P., & Kucharczyk, P. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.06.024 · Cited by 22
Zhang, J., Wang, Y., Lam, M. L., McKinnnie, R. J., Claycomb, W. C., & Xu, X. (2017) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.10.012 · Cited by 22
Preparation of metal chelating active packaging materials by laminated photografting
Lin, Z., Decker, E. A., & Goddard, J. M. (2016) · Journal of Coatings Technology and Research · doi:10.1007/s11998-015-9767-z · Cited by 21
Can poly(ε-caprolactone) crystals nucleate glassy polylactide?
Rizzuto, M., Marinetti, L., Caretti, D., Múgica, A., Zubitur, M., & Müller, A. J. (2017) · CrystEngComm · doi:10.1039/c7ce00578d · Cited by 24
Auliawan, A., & Woo, E. M. (2011) · Polymer Composites · doi:10.1002/pc.21194 · Cited by 21
Wang, X., Meng, S., Ma, W., Pionteck, J., Gnanaseelan, M., Zhou, Z., Sun, B., Qin, Z., & Zhu, M. (2017) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2017.01.007 · Cited by 21
Highly Toughened Polylactide‐Based Materials through Melt‐Blending Techniques
Odent, J., Raquez, J., & Dúbois, P. (2015) · Wiley eBooks · doi:10.1002/9783527656950.ch10 · Cited by 23
Stankevich, K. S., Danilenko, N. V., Gadirov, R. M., Goreninskii, S., Tverdokhlebov, S. I., & Filimonov, V. D. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.078 · Cited by 21
“Surface modification of PLA by PAA was performed by the polymerization of acrylic acid on the PLA surface resulting in a PAA layer - the socalled “grafting from” approach [23,35,36].”
MethodDemina, T. S., Gilman, A. B., & Зеленецкий, А. Н. (2017) · High Energy Chemistry · doi:10.1134/s0018143917040038 · Cited by 21
Preparation and Characterization of Bletilla striata Polysaccharide/Polylactic Acid Composite
Yang, R., Wang, D., Li, H., He, Y., Zheng, X., Yuan, M., & Yuan, M. (2019) · Molecules · doi:10.3390/molecules24112104 · Cited by 20
Metadata
- Authors
- Janorkar, A. V., Metters, A. T., & Hirt, D. E.
- Affiliations
- Clemson University (US)
- Corresponding author
- Hirt, Douglas E.
- ORCID
- Janorkar, Amol V.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-26
- Volume
- 37
- Issue
- 24
- Pages
- 9151-9159
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1991396333
- Cited by
- 173
- References
- 22
- Citations by year
- 2026: 5 · 2025: 4 · 2024: 4 · 2023: 4 · 2022: 10 · 2021: 12 · 2020: 6 · 2019: 15 · 2018: 8 · 2017: 14 · 2016: 18 · 2015: 12 · 2014: 6 · 2013: 6 · 2012: 10
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- polylactic acid films, surface modification, photografting, poly(acrylic acid), polyacrylamide, wettability, biodegradation, surface-initiated polymerization, pH-dependent degradation, chain entanglement, bioactive surfaces
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.