The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Modification of Poly(lactic acid) Films: Enhanced Wettability from Surface-Confined Photografting and Increased Degradation Rate Due to an Artifact of the Photografting Process
Abstract
The major objective of this research was to modify PLA film surfaces with the ultimate aim of making a bioactive surface that will show faster degradation. The PLA film was solvent-cast, and the film surfaces were grafted with poly(acrylic acid) (PAA) and poly(acrylamide) (PAAm) using a UV-induced photopolymerization process. The film surface resulting from each reaction step was analyzed using ATR−FTIR spectroscopy and contact angle measurements. Results showed that PAA was grafted from PLA film surfaces in 2 or 3 h, while PAAm was grafted in 3 or 5 h depending on the method of activation. Films grafted with PAA and PAAm exhibited improved wettability. The neat and surface-modified films were incubated in different pH solutions, viz., pH = 4, 7, and 10, for specified time periods. The films resulting from each treatment were analyzed using atomic force microscopy (AFM). The molecular weights of the incubated films were measured using chloroform-based GPC. Results established that faster degradation of the PLA film when incubated in different pH solutions was achieved for PLA- g -PAA films; however, control studies revealed that the major contribution to the observed degradation was due to the entangled PAA chains resulting from acrylic acid monomer that migrated into the film bulk and not due to the surface-grafted layers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Mechanisms of polymer degradation and erosion
Göpferich, A. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85755-3 · Cited by 1,781
Biodegradation of PLA/GA polymers: increasing complexity
Vert, M., Mauduit, J., & Li, S. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90271-2 · Cited by 425
Polylactide Degradation by an Amycolatopsis sp
Pranamuda, H., Tokiwa, Y., & Tanaka, H. (1997) · Applied and Environmental Microbiology · doi:10.1128/aem.63.4.1637-1640.1997 · Cited by 287
Characterization of the degradation of polylactic acid polymer in a solid substrate environment
Agarwal, M., Koelling, K. W., & Chalmers, J. J. (1998) · Biotechnology Progress · doi:10.1021/bp980015p · Cited by 212
Kimura, Y., Shirotani, K., Yamane, H., & Kitao, T. (1988) · Macromolecules · doi:10.1021/ma00189a037 · Cited by 165
Poly(lactic acid) degradation in soil or under controlled conditions
Torres, A., Li, S., Roussos, S., & Vert, M. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961226)62:13<2247::aid-app9>3.0.co;2-j · Cited by 123
Attenuated total reflectance spectroscopy of polymers : theory and practice
Urban, M. W. (1996) · American Chemical Society eBooks · Cited by 114
Does UV irradiation affect polymer properties relevant to tissue engineering?
Fischbach, C., Teßmar, J., Lucke, A., Schnell, E., Schmeer, G., Blunk, T., & Göpferich, A. M. (2001) · Surface Science · doi:10.1016/s0039-6028(01)01297-3 · Cited by 102
Biodegradation of porous versus non-porous poly(L-lactic acid) films
Lam, K. H., Nieuwenhuis, P., Molenaar, I., Esselbrugge, H., Feijén, J., Dijkstra, P. J., & Schakenraad, J. M. (1994) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00121086 · Cited by 94
Complexity of the hydrolytic degradation of aliphatic polyesters
Vert, M., Li, S., Garreau, H., Mauduit, J., Boustta, M., Schwach, G., Engel, R., & Coudane, J. (1997) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1997.052470116 · Cited by 81
Research works printed but not linked: 16
- Ouchi T., 2002, J. Polym. Sci., Polym. Chem., 40, 1225
- Irvine D. J., 2001, Biomacromolecules, 2, 556
- Cai K., 2002, J. Biomed. Mater. Res., 60, 404
- Ma H., 2000, Macromolecules, 33, 335
- Yang W., 1999, Eur. Polym. J., 35, 1568
- Noh I., 1997, J. Polym. Sci., Polym. Chem., 35, 3482
- Steffens G. C. M., 2002, Biomaterials, 23, 3531
- Zhang X., 1994, J. Bioact. Compat. Polym., 9, 100
- Ho K. G., 1999, J. Environ. Polym. Degrad., 7, 100
- McDonald R. T., 1996, Macromolecules, 29, 7361
- Torres A., 1996, J. Appl. Polym. Sci., 62, 2302, 10.1002/(sici)1097-4628(19961226)62:13<2295::aid-app14>3.0.co;2-2 · DOI
- Heller J., 1987, J. Controlled Release, 5, 177
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 136
- Hsu W. P., 1993, Polymer, 34, 603
- Barndup J., 1988, Polymer Handbook
- Chen K. M., 2000, Langmuir, 16, 7834
Cited by
Items 101–178 of 178
Brown, E., Abdelwahab, M. A., Valerio, O., Misra, M., & Mohanty, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b00056 · Cited by 20
Improving the Wettability of Deep-Groove Polypropylene Fibers by Photografting
Zhu, S., & Hirt, D. E. (2009) · Textile Research Journal · doi:10.1177/0040517508092017 · Cited by 19
“5 g each aqueous solution of monomer and exposing it to UV irradiation for a prescribed time [14].”
Self-citationRen, Z., Li, H., Sun, X., Yan, S., & Yang, Y. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3006098 · Cited by 21
Effects and mechanism of cellulose acetate butyrate on the crystallization of polylactic acid
Kuang, J., Wang, J. H., Bai, Y., & Li, Y. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109286 · Cited by 19
An outlook on recent progress in poly(lactic acid): polymerization, modeling, and optimization
Paul, G. P., & Virivinti, N. (2021) · Iranian Polymer Journal · doi:10.1007/s13726-021-00993-y · Cited by 21
“The degradation rate of PLA is dependent on the water diffusion rate into the polymer, PLA crystallinity, stereoisomeric content, molecular weight and its distribution, and morphology [29].”
BackgroundSurface graft polymerization of N-vinylcaprolactam onto polylactic acid film by UV irradiation
Gutiérrez-Villarreal, M. H., & Guzmán-Moreno, J. G. (2013) · Journal of Polymer Research · doi:10.1007/s10965-013-0149-x · Cited by 19
Balart, J., Fombuena, V., Balart, R., España, J. M., & Navarro, O. F. R. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31751 · Cited by 19
Oyama, H. T., Tanishima, D., & Maekawa, S. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.10.016 · Cited by 18
Li, Y., & Zhen, W. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109341 · Cited by 18
Donate, R., Monzón, M., Alemán‐Domínguez, M. E., & Rodríguez‐Esparragón, F. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35162 · Cited by 18
Mostafa, A. E. A., Emadi, R., Shirali, D., Khodaei, M., Emadi, H., & Saboori, A. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.138097 · Cited by 16
Photodegradation and Radiation Degradation
Sakai, W., & Tsutsumi, N. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch24 · Cited by 16
Solvent‐Casting Approach for Design of Polymer Scaffolds and Their Multifunctional Applications
Joseph, B., Jose, C., Kavil, S. V., Kalarikkal, N., & Thomas, S. (2023) · Wiley eBooks · doi:10.1002/9783527827657.ch12 · Cited by 15
Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution
Wang, J., Huang, Y., & Yang, W. (2019) · Chinese Journal of Polymer Science · doi:10.1007/s10118-019-2308-y · Cited by 16
Khaliq, N. U., Chobisa, D., Richard, C. A., Swinney, M. R., & Yeo, Y. (2021) · Therapeutic Delivery · doi:10.4155/tde-2020-0113 · Cited by 15
Poveda‐Reyes, S., Rodrigo‐Navarro, A., Gamboa‐Martínez, T. C., Rodríguez‐Cabello, J. C., Quintanilla‐Sierra, L., Edlund, U., & Ferrer, G. G. (2015) · Polymer · doi:10.1016/j.polymer.2015.08.018 · Cited by 14
Felice, A. C. D., Lisio, V. D., Francolini, I., Mariano, A., Piozzi, A., d’Abusco, A. S., Sturabotti, E., & Martinelli, A. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14010158 · Cited by 13
Recent Trends in Microbe-Based Food Hydrocolloids
Gupta, P. L., Bishoyi, A. K., Rajput, M., Trivedi, U., Singh, N., & Sanghvi, G. V. (2022) · Springer eBooks · doi:10.1007/978-981-16-8125-7_11 · Cited by 13
Synthesis of polylactide acrylate derivatives for the preparation of 3D structures by photo-curing
Shashkova, V. T., Матвеева, И. А., Glagolev, N. N., Zarkhina, T. S., Черкасова, А. В., Kotova, S., Timashev, P. S., & Solovieva, A. B. (2016) · Mendeleev Communications · doi:10.1016/j.mencom.2016.09.018 · Cited by 12
PHOTODEGRADATION AND RADIATION DEGRADATION
Sakai, W., & Tsutsumi, N. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch19 · Cited by 12
Three-Dimensional Printing of Vitrification Loop Prototypes for Aquatic Species
Tiersch, N. J., Childress, W. M., & Tiersch, T. R. (2018) · Zebrafish · doi:10.1089/zeb.2017.1520 · Cited by 12
Benitez, J. J., Guzmán‐Puyol, S., Cruz‐Carrillo, M. A., Ceseracciu, L., Moreno, A. G., Heredia, A., & Heredia‐Guerrero, J. A. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00643 · Cited by 13
Nugroho, R. W. N., Odelius, K., Höglund, A., & Albertsson, A. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00133 · Cited by 10
Composite Materials Based on PLA and its Applications in Food Packaging
Rodríguez‐Núñez, J. R., Madera-Santana, T. J., Burrola‐Núñez, H., & Martínez‐Encinas, E. G. (2018) · Wiley eBooks · doi:10.1002/9781119160243.ch12 · Cited by 15
Preparation and Characterization of Bioactive Poly (Lactic Acid)/SiO2-CaO Composite Membranes
Jin-Bo, L. I., Liu, X., Li, W., & Zhu, J. (2011) · Journal of Inorganic Materials · doi:10.3724/sp.j.1077.2011.00998 · Cited by 10
“[3] Janorkar A V, Metters A T, Hirt D E.”
BackgroundMorgado, D. L., & ASSIS, O. B. G. (2016) · Macromolecular Research · doi:10.1007/s13233-016-4135-0 · Cited by 10
Das, K., Tiwari, V., Prasannavenkadesan, V., Banerjee, S. K., & Katiyar, V. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56731 · Cited by 9
Park, G., Jang, H., Choi, T., & Park, S. (2025) · Macromolecular Research · doi:10.1007/s13233-025-00393-8 · Cited by 9
“Presumably, however, the PDI value would have decreased if the experiment had been prolonged [27].”
Electrospun Scaffolds in Tendons Regeneration: a review
Gesù, R. D., Amato, G., & Gottardi, R. (2019) · Muscles Ligaments and Tendons Journal · doi:10.32098/mltj.04.2019.02 · Cited by 9
Iggui, K., Kaci, M., Moigne, N. L., & Bergeret, A. (2021) · Polymer Composites · doi:10.1002/pc.25943 · Cited by 9
Mechanical and Thermal Behavior of PLA/PEgAA Blends
de Araújo, J. P., Silva, R. C., Lima, J. C. C., Agrawal, P., & de Mélo, T. J. A. (2016) · Macromolecular Symposia · doi:10.1002/masy.201500140 · Cited by 9
Kai, W., Iwamoto, S., Akamatsu, K., Nakao, S., Isogai, A., & Iwata, T. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.03.010 · Cited by 8
Study of PLA Printability with Flexography Ink: Comparison with Common Packaging Polymer
Ataeefard, M. (2019) · Progress in color, colorants and coatings · Cited by 8
Zhu, Q., Chang, K., Qi, L., Li, X., Gao, W., & Gao, Q. (2021) · Polymers · doi:10.3390/polym13111757 · Cited by 8
Shashkova, V. T., Матвеева, И. А., Glagolev, N. N., Zarkhina, T. S., Timashev, P. S., Bagratashvili, V. N., & Соловьева, А. Б. (2016) · Russian Journal of Physical Chemistry A · doi:10.1134/s0036024416100241 · Cited by 7
Doss, J. R., Shanahan, M. H., Wohl, C. J., & Connell, J. W. (2016) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2016.02.003 · Cited by 7
Yao, L., Li, Y., Li, Y., Wang, Y., Wang, L., Qiu, D., & Weng, Y. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55999 · Cited by 6
New effective ways of polypropylene and polylactide nonwovens functionalization
Shakoorjavan, S., Eskafi, M., Stawski, D., & Akbari, S. (2024) · Journal of the Textile Institute · doi:10.1080/00405000.2024.2379221 · Cited by 6
Lima, J. C. D. C., Pereira, J. D. C. N., de Andrade, M. F., Góis, G. D. S., Simões, I. T. D. A., da Silva, M. A. A. D., de Almeida, Y. M. B., & Vinhas, G. M. (2021) · Research Society and Development · doi:10.33448/rsd-v10i4.14340 · Cited by 6
Plastics in Biomedical Application
Rahman, N. A., & Bahruji, H. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00071-7 · Cited by 6
Pineapple leaf fibers as a reinforcement of biocomposites - an overview
Mohamed, R., Hapizi, N. M., Norizan, M. N., & Khairunnisa, N. (2021) · Polimery · doi:10.14314/polimery.2021.11.1 · Cited by 5
Effect of heat treatment temperature on properties of electrosprayed paperboard
Vanit, S., Sane, A., Yoksan, R., & Jinkarn, T. (2017) · Packaging Technology and Science · doi:10.1002/pts.2332 · Cited by 5
Sukpuang, P., Opaprakasit, M., Petchsuk, A., & Opaprakasit, P. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1025-1026.580 · Cited by 5
Recent advances in polymer-modified poly(lactic acid) for tissue engineering applications
Li, C., Zhu, S. S., & Wang, X. (2026) · Materials Chemistry Frontiers · doi:10.1039/d5qm00944h · Cited by 4
Patterning Proteins on Surfaces of Cross‐Sectioned Multilayer Polymer Films
Zhang, C., Husson, S. M., & Hirt, D. E. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600144 · Cited by 4
Self-citationEffect of vermiculite dispersion in poly(lactic acid) preparation and its biodegradability
Guo, Y. F., Chen, M., Li, J., & Gao, G. (2016) · Polymer Science Series B · doi:10.1134/s1560090416010024 · Cited by 4
Dou, T., Zhou, B., Hu, S., & Zhang, P. (2021) · Polymer · doi:10.1016/j.polymer.2021.124318 · Cited by 5
PLA and cellulose based degradable polymer composites
Oka, M. A. (2010) · SMARTech Repository (Georgia Institute of Technology) · Cited by 4
Preparation and Characterization of Inclusion Complex between β-Cyclodextrin and Polylactic Acid
Nan, S. Y., Fang, Z., & Jun, Z. W. (2015) · Polymer(Korea) · doi:10.7317/pk.2015.39.2.261 · Cited by 5
Poly(Lactic Acid) Additives and Processing Aids
Sin, L. T., & Tueen, B. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814472-5.00008-x · Cited by 3
SURFACE AND BULK MODIFICATION OF POLY(LACTIC ACID)
Rasal, R. M. (2009) · TigerPrints (Clemson University) · Cited by 7
EFFECT OF POLY(ACRYLIC ACID) ON THE RHEOLOGICAL AND THERMAL PROPERTIES OF POLY(LACTIC ACID)
Xiao-rong, L., Xiao-ting, L., Sun, H., Liu, Z., Xie, B., & Yang, M. (2013) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2013.12324 · Cited by 2
pH Responsive Reversibly Tunable Wetting Surfaces
Pant, R., Dattatreya, S., Barman, J., & Khare, K. (2018) · Biologically-inspired systems · doi:10.1007/978-3-319-92654-4_3 · Cited by 2
Protein-based injectable hydrogels towards the regeneration of articular cartilage
Poveda‐Reyes, S. (2016) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/61392 · Cited by 2
Nugroho, R. W. N. (2013) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 2
Microstructuration of nanofibrous membranes by electrospinning : application to tissue engineering
Nedjari, S. (2014) · theses.fr (ABES) · doi:10.70675/179967eezc579z4320z8db9zd3a09300adb7 · Cited by 2
Kumar, S., & Kumar, R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-26516-7.00018-3 · Cited by 1
Majka, T. M., Bednarz, S., & Pielichowski, K. (2025) · Thermochimica Acta · doi:10.1016/j.tca.2025.180155 · Cited by 1
Biomaterials 2006 Symposium und DGBM Tagung
(2006) · BIOmaterialien · doi:10.1515/biomat.2006.7.3.111 · Cited by 1
Photocurable Hydrogel for Tissue Regeneration
Bae, M. S., & Kwon, I. K. (2012) · Pan Stanford Publishing eBooks · doi:10.1201/b11625-12 · Cited by 1
刘, 莲., Yang, W., & 邓, 建. (2009) · Scientia Sinica Chimica · doi:10.1360/zb2009-39-7-569 · Cited by 1
Smith, J. R. R. (2017) · theses.fr (ABES) · doi:10.70675/1ae97be1zaf1ez49c3z8035z468072c6217a · Cited by 1
Modification of polymeric particles via surface grafting for 3D scaffold design
Nugroho, R. W. N. (2015) · KTH Publication Database DiVA (KTH Royal Institute of Technology)
Evaluation of Modified Poly by UV-Induced Graft Polymerization as a Novel Hydrophilic Films
Wang, B. Q. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.815.594
RETRACTED ARTICLE: Recent progress in AFM studies of biodegradable poly(lactic acid) materials
Zeng, C., Zhang, N., & Ren, J. (2012) · Chinese Science Bulletin · doi:10.1007/s11434-012-5052-z
RetractedPolylactic Acid Based Rubber Composites and Nanocomposites
Dehbari, N., Tang, Y., & Moazeni, N. (2017) · Advanced structured materials · doi:10.1007/978-3-319-48806-6_7
TOWARDS IMPROVEMENT ON MECHANICAL PROPERTIES OF BASALT FIBER/POLYLACTIC ACID COMPOSITES
Kim, B. S., Kurniawan, D., Lee, H. Y., & Lim, J. Y. (2011) · eSpace (Curtin University) · doi:10.5281/zenodo.15453034
박천일 (2019) · Seoul National University Open Repository (Seoul National University)
Golan, O., Granada, N., Lemesh, L., Azoulay‐Ginsburg, S., Netti, F., Altobelli, V., Amir, R. J., Adler‐Abramovich, L., & Lachman, N. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.214736
Habnouni, S. E. (2011) · theses.fr (ABES) · doi:10.70675/aca1266cz8d87z499dzb654zcb046583b577
Fonctionnalisation photochimique de polyesters dégradables pour applications en santé
Samad, A. A. (2016) · theses.fr (ABES) · doi:10.70675/7a389498z9877z4f62z899ezdac40a6ecf31 · Cited by 1
Polylactic acid in drug delivery
Askari, V. R., Boroomand, M., Faraji, S., Fadaei, M. S., & Dabbaghi, M. M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-323-95363-4.00011-0
Hussain, D., Basri, A. A., Basri, E. I., Sultan, M. T. H., Norrrahim, M. N. F., & Shah, A. U. M. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.102813
Bioinspired and biodegradable fluorine-free superhydrophobic coatings
Dhatt, P. S., Li, W., Chen, Y., Meng, X., Liu, M., Fei, C., Ragauskas, A. J., Dai, S. Y., & Yuan, J. S. (2026) · Matter · doi:10.1016/j.matt.2026.103068
Metadata
- Authors
- Janorkar, A. V., Metters, A. T., & Hirt, D. E.
- Affiliations
- Clemson University (US)
- Corresponding author
- Hirt, Douglas E.
- ORCID
- Janorkar, Amol V.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-26
- Volume
- 37
- Issue
- 24
- Pages
- 9151-9159
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1991396333
- Cited by
- 173
- References
- 22
- Citations by year
- 2026: 5 · 2025: 4 · 2024: 4 · 2023: 4 · 2022: 10 · 2021: 12 · 2020: 6 · 2019: 15 · 2018: 8 · 2017: 14 · 2016: 18 · 2015: 12 · 2014: 6 · 2013: 6 · 2012: 10
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- polylactic acid films, surface modification, photografting, poly(acrylic acid), polyacrylamide, wettability, biodegradation, surface-initiated polymerization, pH-dependent degradation, chain entanglement, bioactive surfaces
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.