The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Superhydrophobic Fabrics Produced by Electrospinning and Chemical Vapor Deposition
Abstract
A versatile method to produce superhydrophobic fabrics by combining electrospinning and initiated chemical vapor deposition (iCVD) is reported. In this study, poly(caprolactone) (PCL) was first electrospun and then coated with a thin layer of hydrophobic polymerized perfluoroalkyl ethyl methacrylate (PPFEMA) by iCVD. The hierarchical surface roughness inherent in the PCL electrospun mats and the extremely low surface free energy of the coating layer obtained by iCVD yields stable superhydrophobicity with a contact angle of 175° and a threshold sliding angle less than 2.5° for a 20 mg droplet. This PPFEMA-coated PCL mat was also shown to exhibit at least “grade 8” oleophobicity. Hydrophobicity was demonstrated to increase monotonically with a reduction in diameter among bead-free fibers and with the introduction of a high density of relatively small diameter beads. The systematic effect of fiber morphology on superhydrophobicity was also investigated theoretically and experimentally using both beaded and bead-free fibers with diameters ranging from 600 to 2200 nm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
III. An essay on the cohesion of fluids
Young, T. (1805) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1805.0005 · Cited by 6,643
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Super‐Hydrophobic Surfaces: From Natural to Artificial
Feng, L., Li, S., Li, Y., Li, H., Zhang, L., Zhai, J., Song, Y., Liu, B., Jiang, L., & Zhu, D. (2002) · Advanced Materials · doi:10.1002/adma.200290020 · Cited by 4,404
Lafuma, A., & Quéré, D. (2003) · Nature Materials · doi:10.1038/nmat924 · Cited by 3,315
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
Surface Roughness and Contact Angle.
Wenzel, R. N. (1949) · The Journal of Physical and Colloid Chemistry · doi:10.1021/j150474a015 · Cited by 2,321
Cited by
Designing Superoleophobic Surfaces
Tuteja, A., Choi, W., Ma, M., Mabry, J. M., Mazzella, S. A., Rutledge, G. C., McKinley, G. H., & Cohen, R. E. (2007) · Science · doi:10.1126/science.1148326 · Cited by 3,006
Self-citationLi, X.-M., Reinhoudt, D., & Crego-Calama, M. (2007) · Chemical Society Reviews · doi:10.1039/b602486f · Cited by 2,079
Superhydrophobic surfaces: from structural control to functional application
Zhang, X., Shi, F., Niu, J., Jiang, Y., & Wang, Z. (2008) · J. Mater. Chem. · doi:10.1039/b711226b · Cited by 1,768
Ma, M., & Hill, R. M. (2006) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2006.06.002 · Cited by 1,287
Self-citationA review on electrospinning for membrane fabrication: Challenges and applications
Ahmed, F. E., Lalia, B. S., & Hashaikeh, R. (2015) · Desalination · doi:10.1016/j.desal.2014.09.033 · Cited by 1,028
Yan, Y. Y., Gao, N., & Barthlott, W. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.08.005 · Cited by 1,000
Superhydrophobic surfaces: From natural to biomimetic to functional
Guo, Z., Liu, W., & Su, B.-L. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.08.047 · Cited by 974
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
A review on self-cleaning coatings
Ganesh, V. A., Raut, H. K., Nair, A. S., & Ramakrishna, S. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12523k · Cited by 725
Corrosion behavior of superhydrophobic surfaces: A review
Mohamed, A. M. A., Abdullah, A. M., & Younan, N. A. (2015) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2014.03.006 · Cited by 572
Bio-inspired superoleophobic and smart materials: Design, fabrication, and application
Liu, K., Tian, Y., & Jiang, L. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.11.001 · Cited by 570
Robust superhydrophobic TiO2@fabrics for UV shielding, self-cleaning and oil–water separation
Huang, J. Y., Li, S. H., Ge, M. Z., Wang, L. N., Xing, T. L., Chen, G. Q., Liu, X. F., Al-Deyab, S. S., Zhang, K. Q., Chen, T., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05332j · Cited by 504
Surface Modification of Polymers: Methods and Applications
Nemani, S. K., Annavarapu, R. K., Mohammadian, B., Raiyan, A., Heil, J., Haque, M. A., Abdelaal, A., & Sojoudi, H. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201801247 · Cited by 484
Barati Darband, G., Aliofkhazraei, M., Khorsand, S., Sokhanvar, S., & Kaboli, A. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2018.01.013 · Cited by 482
A review on ‘self-cleaning and multifunctional materials’
Ragesh, P., Anand Ganesh, V., Nair, S. V., & Nair, A. S. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02542c · Cited by 481
Superhydrophobic materials for biomedical applications
Falde, E. J., Yohe, S. T., Colson, Y. L., & Grinstaff, M. W. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.050 · Cited by 468
Engineering biomimetic superhydrophobic surfaces of electrospun nanomaterials
Wang, X., Ding, B., Yu, J., & Wang, M. (2011) · Nano Today · doi:10.1016/j.nantod.2011.08.004 · Cited by 461
Superhydrophobic Surfaces by Electrochemical Processes
Darmanin, T., de Givenchy, E. T., Amigoni, S., & Guittard, F. (2013) · Advanced Materials · doi:10.1002/adma.201204300 · Cited by 457
Lowery, J. L., Datta, N., & Rutledge, G. C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.072 · Cited by 448
Self-citationNguyen-Tri, P., Tran, H. N., Plamondon, C. O., Tuduri, L., Vo, D.-V. N., Nanda, S., Mishra, A., Chao, H.-P., & Bajpai, A. K. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.03.042 · Cited by 437
The role of elasticity in the formation of electrospun fibers
Yu, J. H., Fridrikh, S. V., & Rutledge, G. C. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.050 · Cited by 425
Self-citationChemical Vapor Deposition of Conformal, Functional, and Responsive Polymer Films
Alf, M. E., Asatekin, A., Barr, M. C., Baxamusa, S. H., Chelawat, H., Ozaydin‐Ince, G., Petruczok, C. D., Sreenivasan, R., Tenhaeff, W. E., Trujillo, N. J., et al. (2010) · Advanced Materials · doi:10.1002/adma.200902765 · Cited by 399
Self-citationMcCann, J. T., Marquez, M., & Xia, Y. (2006) · Nano Letters · doi:10.1021/nl0620839 · Cited by 357
Superhydrophobic electrospun nanofibers
Nuraje, N., Khan, W. S., Lei, Y., Ceylan, M., & Asmatulu, R. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00189f · Cited by 353
Liao, Y., Wang, R., & Fane, A. G. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.04.006 · Cited by 327
Superhydrophobic and Oleophobic Fibers by Coaxial Electrospinning
Han, D., & Steckl, A. J. (2009) · Langmuir · doi:10.1021/la900660v · Cited by 323
Literature review on superhydrophobic self‐cleaning surfaces produced by electrospinning
Sas, I., Gorga, R. E., Joines, J. A., & Thoney, K. A. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23070 · Cited by 316
Rational design of materials interface at nanoscale towards intelligent oil–water separation
Ge, M., Cao, C., Huang, J., Zhang, X., Tang, Y., Zhou, X., Zhang, K., Chen, Z., & Lai, Y. (2018) · Nanoscale Horizons · doi:10.1039/c7nh00185a · Cited by 311
Design of omniphobic interfaces for membrane distillation – A review
Lu, K. J., Chen, Y., & Chung, T.-S. (2019) · Water Research · doi:10.1016/j.watres.2019.06.056 · Cited by 304
Review of Fluid Slip over Superhydrophobic Surfaces and Its Dependence on the Contact Angle
Voronov, R. S., Papavassiliou, D. V., & Lee, L. L. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0712941 · Cited by 294
Functionalized synthetic biodegradable polymer scaffolds for tissue engineering.
Liu, X., Holzwarth, J. M., & Ma, P. X. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201100466 · Cited by 290
Bioinspired Superwettability Electrospun Micro/Nanofibers and Their Applications
Hou, L., Wang, N., Wu, J., Cui, Z., Jiang, L., & Zhao, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801114 · Cited by 284
Progress in biomimetic leverages for marine antifouling using nanocomposite coatings
Selim, M. S., El-Safty, S. A., Shenashen, M. A., Higazy, S. A., & Elmarakbi, A. (2020) · Journal of Materials Chemistry B · doi:10.1039/c9tb02119a · Cited by 255
Coclite, A. M., Howden, R. M., Borrelli, D. C., Petruczok, C. D., Yang, R., Yagüe, J. L., Ugur, A., Chen, N., Lee, S., Jo, W. J., et al. (2013) · Advanced Materials · doi:10.1002/adma.201301878 · Cited by 254
Self-citationOliveira, J. E., Mattoso, L. H. C., Orts, W. J., & Medeiros, E. S. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/409572 · Cited by 242
Metadata
- Authors
- Ma, M., Mao, Y., Gupta, M., Gleason, K. K., & Rutledge, G. C.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-10-14
- Volume
- 38
- Issue
- 23
- Pages
- 9742-9748
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W4243614791
- Cited by
- 741
- References
- 46
- FWCI
- 12.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.