Thiol-allyl ether-methacrylate ternary systems: evolution mechanism of polymerization-induced shrinkage stress and mechanical properties
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
The evolution of the polymerization-induced shrinkage stress and mechanical properties of thiol−allyl ether−methacrylate ternary systems and their relationship to the polymerization kinetics have been investigated. Because of the two distinct polymerization regimes of the ternary systems a methacrylate homopolymerization regime followed by a thiol−ene polymerization dominated regime the mechanism for the evolution of polymerization induced shrinkage stress is unique as compared to other thiol−ene and methacrylate systems. During the first polymerization stage, only intermediate molecular weight methacrylate oligomers are produced, resulting in delayed gelation and near zero shrinkage stress. Immediately following the first polymerization stage, the allyl ether begins to polymerize, and shrinkage stress increases in correspondence with the increased allyl ether conversion. It is observed that the shrinkage stress of the ternary systems exhibits ∼50% of the shrinkage stress of the current dental restoration systems. Also, because of the two polymerization regimes, the mechanical properties evolve uniquely as compared to other ternary systems. It is noted that glass transition temperatures of the ternary systems (∼100 °C) are much higher than traditional thiol−ene polymers and comparable to the current polymeric composites for dental restorations, indicating that the thiol−allyl ether−methacrylate systems are an excellent candidate for dental restorations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Reduction in polymerization shrinkage has been attributed to the nature of thiol-ene polymerization; delayed gelation produces more homogeneous structure with narrow glass transition temperature ranges and reduced brittleness in comparison with classic methacrylate resin systems [323], [324].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [323]
Citations
Cites
Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives
Davidson, C. L., & Feilzer, A. J. (1997) · Journal of Dentistry · doi:10.1016/s0300-5712(96)00063-2 · Cited by 729
New developments of polymeric dental composites
Moszner, N., & Salz, U. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00005-3 · Cited by 654
Kinetic evidence of reaction diffusion during the polymerization of multi(meth)acrylate monomers
Anseth, K. S., Wang, C. M., & Bowman, C. N. (1994) · Macromolecules · doi:10.1021/ma00081a004 · Cited by 336
Self-citationConversion-dependent shrinkage stress and strain in dental resins and composites
Stansbury, J. W., Trujillo-Lemon, M., Lu, H., Ding, X., Lin, Y., & Ge, J. (2005) · Dental Materials · doi:10.1016/j.dental.2004.10.006 · Cited by 283
Investigations of step-growth thiol-ene polymerizations for novel dental restoratives
Lu, H., Carioscia, J. A., Stansbury, J. W., & Bowman, C. N. (2005) · Dental Materials · doi:10.1016/j.dental.2005.04.001 · Cited by 268
Self-citationPolymerization shrinkage of methacrylate esters
Patel, M. P., Braden, M., & Davy, K. W. M. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90030-5 · Cited by 258
Thiol/ene photocurable polymers
Morgan, C. R., Magnotta, F., & Ketley, A. D. (1977) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1977.170150311 · Cited by 256
A calorimetric study of acrylate photopolymerization
Tryson, G. R., & Shultz, A. R. (1979) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1979.180171202 · Cited by 245
Thiol-ene oligomers as dental restorative materials
Carioscia, J. A., Lu, H., Stanbury, J. W., & Bowman, C. N. (2005) · Dental Materials · doi:10.1016/j.dental.2005.04.002 · Cited by 173
Self-citationGröhn, F., Kim, G., Bauer, B. J., & Amis, E. J. (2001) · Macromolecules · doi:10.1021/ma001489j · Cited by 129
Research works printed but not linked: 8
- Bowen R. L., 1962, US Patent 3,066,122
- Kim Y., 2004, Part B: Appl. Biomater
- Nuyken O., 1996, Macromol. Symp.
- Moon, E. J.; Lee, J. Y.; Kim, C. K.; Cho, B. H. J. Mater. Sci. Mater. Med. 1997 , 8 , 283.
- Hino T., 2003, Macromolecules, 36, 338
- Jacobine A., 1993, Radiation Curing in Polymer Science and Technology III, Polymerisation Mechanisms, 3, 219
- Hoyle C. E., 2004, Part A: Polym. Chem
- Lu H., 2004, Part B: Appl. Biomater
Cited by
Hoyle, C. E., & Bowman, C. N. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903924 · Cited by 4,182
Self-citationPolymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Recent Advances and Developments in Composite Dental Restorative Materials
Cramer, N. B., Stansbury, J. W., & Bowman, C. N. (2011) · Journal of Dental Research · doi:10.1177/0022034510381263 · Cited by 716
Self-citationJiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
“Reduction in polymerization shrinkage has been attributed to the nature of thiol-ene polymerization; delayed gelation produces more homogeneous structure with narrow glass transition temperature ranges and reduced brittleness in comparison with classic methacrylate resin systems [323, 324] .”
BackgroundFairbanks, B. D., Scott, T. F., Kloxin, C. J., Anseth, K. S., & Bowman, C. N. (2009) · Macromolecules · doi:10.1021/ma801903w · Cited by 405
Self-citationHoyle, C. E., & Bowman, C. N. (2010) · Angewandte Chemie · doi:10.1002/ange.200903924 · Cited by 293
Self-citationToward an enhanced understanding and implementation of photopolymerization reactions
Bowman, C. N., & Kloxin, C. J. (2008) · AIChE Journal · doi:10.1002/aic.11678 · Cited by 280
Self-citationVitrimeric Silicone Elastomers Enabled by Dynamic Meldrum’s Acid-Derived Cross-Links
Ishibashi, J. S. A., & Kalow, J. A. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00166 · Cited by 211
Photochemically Driven Polymeric Network Formation: Synthesis and Applications
Blasco, E., Wegener, M., & Barner‐Kowollik, C. (2017) · Advanced Materials · doi:10.1002/adma.201604005 · Cited by 175
Moszner, N., & Hirt, T. D. (2012) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26260 · Cited by 174
Schmidleithner, C., & Kalaskar, D. M. (2018) · InTech eBooks · doi:10.5772/intechopen.78147 · Cited by 168
Investigation of thiol-ene and thiol-ene–methacrylate based resins as dental restorative materials
Cramer, N. B., Couch, C. L., Schreck, K. M., Carioscia, J. A., Boulden, J. E., Stansbury, J. W., & Bowman, C. N. (2009) · Dental Materials · doi:10.1016/j.dental.2009.08.004 · Cited by 156
Self-citationFunctional Dyes in Polymeric 3D Printing: Applications and Perspectives
Gastaldi, M., Cardano, F., Zanetti, M., Viscardi, G., Barolo, C., Bordiga, S., Magdassi, S., Fin, A., & Roppolo, I. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00455 · Cited by 144
“68 Finally, polymers with higher T g can be obtained replacing alkene with alkyne in mixture with thiols monomers.”
Wang, C., Chen, L., Li, J., Sun, S., Ma, L., Wu, G., Zhao, F., Jiang, B., & Huang, Y. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.04.003 · Cited by 142
Thiol‐X Chemistries in Polymer and Materials Science
Royal Society of Chemistry (2013) · Royal Society of Chemistry eBooks · doi:10.1039/9781849736961 · Cited by 134
Properties of methacrylate–thiol–ene formulations as dental restorative materials
Cramer, N. B., Couch, C. L., Schreck, K. M., Boulden, J. E., Wydra, R. J., Stansbury, J. W., & Bowman, C. N. (2010) · Dental Materials · doi:10.1016/j.dental.2010.04.005 · Cited by 120
Self-citationEsfandiari, P., Ligon, S. C., Lagref, J. J., Frantz, R., Cherkaoui, M. Z., & Liska, R. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26848 · Cited by 119
Stereolithography 3D printing technology in pharmaceuticals: a review
Deshmane, S., Kendre, P., Mahajan, H., & Jain, S. (2021) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2021.1994990 · Cited by 103
Pfeifer, C. S., Wilson, N. D., Shelton, Z. R., & Stansbury, J. W. (2011) · Polymer · doi:10.1016/j.polymer.2011.05.034 · Cited by 103
Thiol–epoxy/thiol–acrylate hybrid materials synthesized by photopolymerization
Yu, J., He, Y. T., Sun, Y., Yang, H., Yang, W., & Nie, J. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc30360h · Cited by 102
Polymer-Based Direct Filling Materials
Pfeifer, C. S. (2017) · Dental Clinics of North America · doi:10.1016/j.cden.2017.06.002 · Cited by 79
Beigi-Boroujeni, S., Yeganeh, H., & Atai, M. (2013) · Dental Materials · doi:10.1016/j.dental.2013.04.015 · Cited by 78
Park, H., Kloxin, C. J., Scott, T. F., & Bowman, C. N. (2010) · Dental Materials · doi:10.1016/j.dental.2010.06.007 · Cited by 73
Self-citation“Thiol-ene” photo-cured hybrid materials based on POSS and renewable vegetable oil
Luo, A., Jiang, X., Lin, H., & Yin, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11425e · Cited by 71
Ye, S., Cramer, N. B., Smith, I. R., Voigt, K. R., & Bowman, C. N. (2011) · Macromolecules · doi:10.1021/ma2018809 · Cited by 70
Self-citationHybrid Organic/Inorganic Thiol–Ene-Based Photopolymerized Networks
Schreck, K. M., Leung, D., & Bowman, C. N. (2011) · Macromolecules · doi:10.1021/ma201695x · Cited by 69
Self-citationPhotochemical tuning of materials: A click chemistry perspective
Kaur, G., Singh, G., & Singh, J. (2018) · Materials Today Chemistry · doi:10.1016/j.mtchem.2018.03.002 · Cited by 69
Park, H., Kloxin, C. J., Abuelyaman, A. S., Oxman, J. D., & Bowman, C. N. (2012) · Macromolecules · doi:10.1021/ma300228z · Cited by 66
Self-citationThio-urethane oligomers improve the properties of light-cured resin cements
Bacchi, A., Consani, R. L. X., Martim, G. C., & Pfeifer, C. S. (2015) · Dental Materials · doi:10.1016/j.dental.2015.02.008 · Cited by 64
van der Ende, A. E., Croce, T. A., Hamilton, S. K., Sathiyakumar, V., & Harth, E. M. (2009) · Soft Matter · doi:10.1039/b820379b · Cited by 63
A comparison of polymer substrates for photolithographic processing of flexible bioelectronics
Simon, D., Ware, T. H., Marcotte, R. J., Lund, B. R., Smith, D. W., Prima, M. A. D., Rennaker, R. L., & Voit, W. (2013) · Biomedical Microdevices · doi:10.1007/s10544-013-9782-8 · Cited by 61
“However, the inherent high cure stresses formed upon free-radical polymerization of the acrylate substrate diminishes dimensional stability, which can cause failure of thin film electrodes during subsequent processing steps (Lee et al. 2007).”
BackgroundLeung, D., & Bowman, C. N. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100402 · Cited by 60
Self-citationClick-based dual-curing thermosets and their applications
Ramis, X., Fernández‐Francos, X., la Flor, S. D., Ferrando, F., & Serra, À. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101021-1.00016-2 · Cited by 56
Recent advances in the development of dental composite resins
Lavigueur, C., & Zhu, X. X. (2011) · RSC Advances · doi:10.1039/c1ra00922b · Cited by 53
Chemical functionalization of emulsion-templated porous polymers by thiol–ene “click” chemistry
Langford, C., Johnson, D. W., & Cameron, N. R. (2014) · Polymer Chemistry · doi:10.1039/c4py00713a · Cited by 52
Kumar, S., Hong, H., Choi, W., Akhtar, I., Rehman, M. A., & Seo, Y. (2019) · RSC Advances · doi:10.1039/c9ra00729f · Cited by 50
Functional Microcapsules via Thiol–Ene Photopolymerization in Droplet-Based Microfluidics
Amato, D. V., Lee, H., Werner, J. G., Weitz, D. A., & Patton, D. L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16382 · Cited by 48
Effects of Chemical Modification of Thiol−Ene Networks on Enthalpy Relaxation
Shin, J., Nazarenko, S. I., & Hoyle, C. E. (2009) · Macromolecules · doi:10.1021/ma9001403 · Cited by 44
McNair, O. D., Brent, D. P., Sparks, B. J., Patton, D. L., & Savin, D. A. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405138e · Cited by 42
Highly Tunable Thiol–Ene Networks via Dual Thiol Addition
McNair, O. D., Sparks, B. J., Janisse, A. P., Brent, D. P., Patton, D. L., & Savin, D. A. (2013) · Macromolecules · doi:10.1021/ma400748h · Cited by 41
Thiol‐ene and Thiol‐yne Chemistry in Ideal Network Synthesis
Cramer, N. B., & Bowman, C. N. (2013) · Royal Society of Chemistry eBooks · doi:10.1039/9781849736961-00001 · Cited by 41
Self-citationFang, H., & Guymon, C. A. (2021) · Polymer International · doi:10.1002/pi.6341 · Cited by 41
Ligon, S. C., Seidler, K., Gorsche, C., Grießer, M., Moszner, N., & Liska, R. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27788 · Cited by 40
Photopolymerization Behavior of Thiol−Acrylate Monomers in Clay Nanocomposites
Owusu-Adom, K., Schall, J., & Guymon, C. A. (2009) · Macromolecules · doi:10.1021/ma802656x · Cited by 35
Beigi Burujeny, S., Atai, M., & Yeganeh, H. (2015) · Dental Materials · doi:10.1016/j.dental.2014.12.014 · Cited by 32
(Meth)acrylate vinyl ester hybrid polymerizations
Lee, T. Y., Cramer, N. B., Hoyle, C. E., Stansbury, J. W., & Bowman, C. N. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23327 · Cited by 32
Self-citationBelbakra, Z., Cherkaoui, M. Z., & Allonas, X. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.09.012 · Cited by 28
Kim, S. K., & Guymon, C. A. (2012) · Polymer · doi:10.1016/j.polymer.2012.02.028 · Cited by 28
Jaymand, M., Lotfi, M., & Lotfi, R. (2016) · RSC Advances · doi:10.1039/c6ra05722e · Cited by 28
In Situ Photopolymerization of Biomaterials by Thiol‐yne Click Chemistry
Lomba, M., Oriol, L. T., Alcalá, R., Sánchez‐Somolinos, C., Moros, M., Grazú, V., Serrano, J. L., & de la Fuente, J. M. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100123 · Cited by 27
Kawana, M., Takahashi, J.-I., Guo, J., & Tomita, Y. (2015) · Optics Express · doi:10.1364/oe.23.015356 · Cited by 26
Thiol‐X Chemistry: A Skeleton Key Unlocking Advanced Polymers in Additive Manufacturing
Dicks, J. A., & Woolard, C. D. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400445 · Cited by 25
Photo-cured Materials from Vegetable Oils
Gan, Y., & Jiang, X. (2014) · Royal Society of Chemistry eBooks · doi:10.1039/9781782621850-00001 · Cited by 25
The effect of a dithiol spiroorthocarbonate on mechanical properties and shrinkage of a dental resin
Ortiz, R. A., Gómez, A. G. S., Duarte, M. L. B., & Valdez, A. E. G. (2014) · Designed Monomers & Polymers · doi:10.1080/15685551.2014.947555 · Cited by 25
“Nonetheless, the reduction in volume shrinkage in thiol–ene systems implies a reduction in cross-link density; therefore, one of the drawbacks of thiol–ene systems is that they generally exhibit reduced mechanical properties in comparison with dimethacrylate-based systems.[14] For this reason, the addition of a thiol–…”
BackgroundChemical Compatibility and Reaction-Induced Exfoliation in Photopolymerizable Clay Nanocomposites
Owusu-Adom, K., & Guymon, C. A. (2008) · Macromolecules · doi:10.1021/ma801688q · Cited by 25
Synthetic growth by self-lubricated photopolymerization and extrusion inspired by plants and fungi
Hausladen, M. M., Zhao, B., Kubala, M., Francis, L. F., Kowalewski, T. M., & Ellison, C. J. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2201776119 · Cited by 24
Sarkar, G., Kundu, D., & Banerjee, T. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.10.036 · Cited by 24
Fujii, R., Guo, J., Klepp, J., Pruner, C., Fally, M., & Tomita, Y. (2014) · Optics Letters · doi:10.1364/ol.39.003453 · Cited by 23
Langford, C., Johnson, D. W., & Cameron, N. R. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201400733 · Cited by 23
Kim, S. K., & Guymon, C. A. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24460 · Cited by 23
Synthesis and thermomechanical behavior of (qua)ternary thiol-ene(/acrylate) copolymers
Kasprzak, S. E., Martin, B. N., Raj, T., & Gall, K. (2009) · Polymer · doi:10.1016/j.polymer.2009.09.044 · Cited by 21
Yu, B., He, J., Garoushi, S. K., VALLITTU, P. K., & Lassila, L. V. J. (2021) · Materials · doi:10.3390/ma14112817 · Cited by 19
“With increasing the content of thiol monomers in thiol-ene-methacrylate ternary system, the molecular weight of the methacrylate oligomers decreased because of increasing the chain transfer rate for the thiol group, which could lead to the reduction of flexural modulus, hardness as well as glass transition temperature…”
BackgroundSong, H. B., Wang, X., Patton, J. R., Stansbury, J. W., & Bowman, C. N. (2017) · Dental Materials · doi:10.1016/j.dental.2017.03.010 · Cited by 18
Self-citationGuo, J., Fujii, R., Ono, T., Klepp, J., Pruner, C., Fally, M., & Tomita, Y. (2014) · Optics Letters · doi:10.1364/ol.39.006743 · Cited by 17
Hosseinzadeh, E., Bosques‐Palomo, B., Carmona‐Arriaga, F., Fabiani, M. A., & Aguirre‐Soto, A. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202300611 · Cited by 14
Ghanta, R., Abilova, A., McAndrew, C., & Kuenstler, A. S. (2025) · Polymer Chemistry · doi:10.1039/d4py01361a · Cited by 14
Güvendiren, M., Purcell, B. P., & Burdick, J. A. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00227-2 · Cited by 14
Jiang, L., Zhang, G., Yuan, K., Wang, C., Liu, H., Xiao, C., Sun, H., Wang, X., Zong, L., Wang, J., et al. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108384 · Cited by 13
Thiol–ene ionogels based on polymerizable imidazolium ionic liquids
Lewandowska, A., Gajewski, P., Szczęśniak, K., Fojud, Z., Robakowska, M., Skrzypczak, A., Voelkel, A., & Marcinkowska, A. (2022) · Polymer Chemistry · doi:10.1039/d1py01726h · Cited by 13
The Influence of the Thiol-ene Mechanism on Polymer Network Topology
Ghanta, R., Jeong, B. C., Kuenstler, A. S., & Statt, A. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02209 · Cited by 9
Force-induced cleavage of C–O bond in photochromic naphthopyrans
Guo, K., & Chen, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.11.028 · Cited by 9
Designing of polyhedral oligomeric silsesquioxane (POSS)-based dithiol/dimethacrylate nano-hybrids
Florea, N. M., Damian, C. M., Ionescu, C., Lungu, A., Vasile, E., & Iovu, H. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2242-5 · Cited by 7
Photopolymers based on ethynyl-functionalized degradable polylactides by thiol-yne ‘Click Chemistry’
Concellón, A., Asín, L., González‐Lana, S., de la Fuente, J. M., Sánchez‐Somolinos, C., Piñol, M., & Oriol, L. T. (2017) · Polymer · doi:10.1016/j.polymer.2017.04.035 · Cited by 7
Innovative Hybrid Nanocomposites in 3D Printing for Functional Applications: A Review
Tuyen, N. T. K., Kim, D. M., Lee, J., & Jung, J. (2024) · Molecules · doi:10.3390/molecules29215159 · Cited by 6
“Hybrid systems, combining acrylates and epoxies, have been developed to benefit from the strength of both, offering fast curing with minimal shrinkage, and they are now widely used in commercial SLA systems [51,52].”
MethodPrabhakaran, P., & Lee, K.-S. (2019) · Polymers and polymeric composites · doi:10.1007/978-3-319-95987-0_1 · Cited by 6
Development and Dental Applications of Spiro Expanding Monomers as Antishrinkage Additives
Zhang, X., Wang, Z., Yao, S., Zhou, C., & Wu, J. (2022) · ChemistrySelect · doi:10.1002/slct.202201025 · Cited by 6
Dicks, J. A., & Becker, T. H. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c01150 · Cited by 5
Photomechanical Effects in Amorphous and Semicrystalline Polymers
Wie, J. J. (2017) · Wiley eBooks · doi:10.1002/9781119123279.ch4 · Cited by 5
Hierarchical ordering in light-triggered additive manufacturing
Monti, J., & Blasco, E. (2020) · Polymer Chemistry · doi:10.1039/d0py01077d · Cited by 3
Exploring Aromatic S-Thioformates as Photoinitiators
Rieger, P. H., Püschmann, S. D., Haas, M. J., Schmallegger, M., de la Cruz, G. G., & Grießer, T. (2023) · Polymers · doi:10.3390/polym15071647 · Cited by 3
Alrefai, M., & Marić, M. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230377 · Cited by 3
Liu, W., Fu, J. W., Wu, X., Ma, Y., Liu, X., Liao, Y., & Wang, H. (2015) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-015-1293-4 · Cited by 2
“However shrinkage has not been eliminated from most commercial resins, and in fact it is an almost inevitable phenomenon because of the reduction in molecular spacing associated with the replacement of the van der Waals distances between monomers with covalent bonds during polymerization([6-8]).”
BackgroundPrabhakaran, P., & Lee, K.-S. (2018) · Polymers and polymeric composites · doi:10.1007/978-3-319-92067-2_1-1 · Cited by 2
Fugolin, A. P. P., Bacchi, A., & Pfeifer, C. S. (2017) · Springer eBooks · doi:10.1007/978-3-319-60961-4_3 · Cited by 1
Thiol-ene polymer based on plant phenols
Sayed, A. R., McNair, O. D., & Wiggins, J. S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19019-3.00006-6 · Cited by 1
High-performance thermoplastic elastomers based on silicones
Dey, S., & Mondal, T. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-91758-2.00018-0 · Cited by 1
Stress Relaxation by Addition-fragmentation Chain Transfer in Glassy Polymer Networks
Park, H. (2011) · CU Scholar (University of Colorado Boulder) · Cited by 1
Synthesis of functionalised polysaccharides for hydraulic fracturing applications
Longstaff, A. J. (2017) · Durham e-Theses (Durham University) · Cited by 1
The Efficacy of LED Light Polymerization Units in Private Dental Offices in Toronto, Canada
Kojic, D. D. (2018) · TSpace (University of Toronto) · Cited by 1
New Monomers for Tough Photopolymers
Steindl, J. (2021) · reposiTUm (TU Wien) · doi:10.34726/hss.2021.38979 · Cited by 1
Directed network structure through controlled radical photopolymerization
Fang, H. (2022) · Iowa Research Online (The University of Iowa) · doi:10.25820/etd.006832 · Cited by 1
Thiol-ene/yne photopolymerizations
Ye, S. (2011)
Developing Low Shrinkage Stress Thiol-Ene Dental Resins & Two-color Photopolymerization Chemistries
van der Laan, & Luit, H. (2019) · Deep Blue (University of Michigan)
Faculty Opinions recommendation of Polymers for 3D printing and customized additive manufacturing.
Agis, H. (2019) · Faculty Opinions – Post-Publication Peer Review of the Biomedical Literature · doi:10.3410/f.727857659.793561164
Ajay, R., Ravivarman, C., Daisy, R., Elango, P. P., Srikanth, M. V., & Gurunathan, D. (2024) · World Journal of Dentistry · doi:10.5005/jp-journals-10015-2406
“Lee et al. 32 referred to the term hybrid polymerization where the methacrylates/acrylates and the vinyl esters were copolymerized.”
Thermoset Films and Nonwovens via Thiol-Ene Photopolymerization
Lau, C. M. (2021) · University of Minnesota Digital Conservancy (University of Minnesota)
Thiol-Ene/Yne Photopolymerization
Ye, S. (2011) · CU Scholar (University of Colorado Boulder)
Belbakra, Z. (2013) · theses.fr (ABES) · doi:10.70675/e3b7843dz7aacz4b94z82d7ze21c0f2ccdc0
Metadata
- Authors
- Lee, T. Y., Carioscia, J., Smith, Z., & Bowman, C. N.
- Affiliations
- University of Colorado Boulder (US)
- Corresponding author
- Bowman, Christopher N.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-02-02
- Volume
- 40
- Issue
- 5
- Pages
- 1473-1479
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2062965294
- Cited by
- 92
- References
- 24
- Citations by year
- 2026: 5 · 2025: 2 · 2024: 5 · 2023: 3 · 2022: 3 · 2021: 4 · 2020: 2 · 2019: 2 · 2018: 6 · 2017: 11 · 2016: 2 · 2015: 6 · 2014: 7 · 2013: 6 · 2012: 5
- FWCI
- 7.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Materials Science › Polymers and Plastics › Epoxy Resin Curing Processes
- Keywords
- thiol-ene polymerization, polymerization kinetics, two-step polymerization, glass transition temperature, mechanical properties, dental restorations, dental composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.